Question about 2001 Toyota Sequoia

1 Answer

Toyota sequoia 01 will not start after i changed the ignition switch whst can i do

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 76,649 Answers

Did you use the correct coded key?

Posted on Jan 02, 2017

  • Melvin Wesson
    Melvin Wesson Sep 18, 2017

    I used the key that came with the new switch

  • yadayada
    yadayada Sep 18, 2017

    That will not work it needs to be coded to the car, you need the dealer to do that.

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: how to reset 2006 toyota sequoia after change oil

Previous Post dead wrong...

Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.

Turn ignition OFF

Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.

Posted on Jun 27, 2009

danielson57
  • 108 Answers

SOURCE: 2001 toyota sequoia- car won't start on park.. but

sounds like park safety switch,there are 2 switches 1 neutral and 1 park, if it starts in neutral,it is working,if in park,and does not start usually means bad switch or wire off.

Posted on Dec 23, 2009

  • 6 Answers

SOURCE: reset the service indicator light - 06 Toyota Sequoia

set the mileage when the odometer is showing. put the key to off position. press and hold the reset button then turn the key to on position, do not start. then continue holding the reset button until the reading stops to zero or blank. turn it off, that should reset the light indicator

Posted on Feb 21, 2010

Testimonial: "thanks for the help! it worked like a charm. appreciate it! "

clifford224
  • 1975 Answers

SOURCE: resetting anti theft after changing ignition on 2002 toyota sequoia

Do you still have a key from the old ignition switch or was that why you had to replace it in the first place. If you have the old key I can explain how to just registaring the new keys from the transponder of the old key. I know it sounds crazy but you have to register the new keys and this is the easiest way without having special equipment. Just comment here either way or email me directly at csautomotivecars@att.net with your information.

Posted on Jun 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 TOYOTA SEQUOIA HAD TO JUMP START THE CAR NOW IT WILL NOT TURN OFF


If you have an auto start, it could be related to that. This sounds like an ignition switch problem. I would check this first.

Jan 04, 2017 | Toyota Cars & Trucks

1 Answer

Where is tire pressure module 05 toyota sequoia


Each tire has a module and the receiving unit in the car typically under the dash. To reset it:
1. Park the vehicle in a safe place and turn the ignition switch to the "LOCK" position.
2. Adjust the pressure of all installed tires to the specified cold tire inflation pressure level.
3. Turn the ignition key to the "ON" position.
4. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times.
5. Leave the system with the ignition switch in "ON" position for a few minutes, and then turn the ignition key to the "LOCK" position.

May 25, 2014 | 2005 Toyota Sequoia

1 Answer

Resetting anti theft after changing ignition on 2002 toyota sequoia


Do you still have a key from the old ignition switch or was that why you had to replace it in the first place. If you have the old key I can explain how to just registaring the new keys from the transponder of the old key. I know it sounds crazy but you have to register the new keys and this is the easiest way without having special equipment. Just comment here either way or email me directly at csautomotivecars@att.net with your information.

Jun 07, 2012 | 2002 Toyota Sequoia

1 Answer

Sequoia parking light


The brake light switch is sticking on, the switch is located under the dash above the brake bedal, replace it.

Feb 17, 2012 | 2001 Toyota Sequoia

1 Answer

Tried to start my sequoia today it just clicked checked battery checked out to be good. What else can i check


make sure the battery connection are good. try a jump. it takes a lot of power to start a car. if it starts with a jump it most likely needs a battery. if the battery is good suspect the starter. the fact that the starter clicks should clear your ignition switch as a suspect.

Nov 19, 2010 | 2004 Toyota Sequoia

1 Answer

Key will not turn when inserted in ignition for 2001 sequoia toyota


have you got a an answer? you just need to keep a hand on the key to turn and the other hand on the steering wheel move it both ways (left and right) gently!
if problem stays, means you need to change the switch assemb. may be a kid inserted some thing in it!! or theft trial!

Oct 22, 2010 | 2001 Toyota Sequoia

1 Answer

2001 toyota sequoia- car won't start on park.. but starts on neutral...mechanic says it's the neutral safety switch..it is??


sounds like park safety switch,there are 2 switches 1 neutral and 1 park, if it starts in neutral,it is working,if in park,and does not start usually means bad switch or wire off.

Dec 23, 2009 | 2003 Toyota Sequoia

1 Answer

2003 toyota sequoia radio error code 1.will not play cd but am radio works


Error one indicates a bad laser pickup, or a calibration issue. I would recommend a CD cleaner, but, if that does not help, the radio will need to be taken to an authorized service center. The 01 code is rather common to those radios.

Oct 09, 2009 | 2002 Toyota Sequoia

2 Answers

How to reset 2006 toyota sequoia after change oil


Previous Post dead wrong...

Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.

Turn ignition OFF

Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.

Apr 18, 2009 | Toyota Sequoia Cars & Trucks

Not finding what you are looking for?
2001 Toyota Sequoia Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...