Question about 2003 Oldsmobile Silhouette

Open Question

What is the torque for front struts on 2003 silhouette

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs 2003 olds silhouette rocker arm 3.400


Here is a suggested updated torque spec for this engine's rocker arm bolts;
Rocker arms
Step one: Torque to 11 ft lbs then tighten an additional 90 degrees of bolt head rotation. Some guys don't fuss with the torque specs and just get them good and tight. Either way, be careful, as the heads are aluminum. You do not want to over tighten these bolts

Oct 07, 2016 | 2003 Oldsmobile Silhouette

1 Answer

Upper torque strut bolts


I think you already posted on this, however
lower strut to steering knuckle bolts 156 ft lb oiled
tie rod end ball joint nuts 36 ft lb
brake caliper to steering knuckle bolts 79 ft lb
front strut upper centre nut 36 ft lb
front strut upper flange to body nuts 59 ft lb
brake hose clamp to strut assy 22 ft lb

Aug 13, 2013 | 1993 Toyota Camry V6

2 Answers

When u put the sunfire in drive the engine shifts. is this cause the torque motor mount is bad


The torque strut, which is mounted underneath on the passenger side is what controls the front to back movement of the engine. The engine will shift slightly with a healthy torque strut, but shouldn't move more that an inch or so. The torqu strut is easily changed, but you will want the front wheels off the ground as you will have to manipulate the motor somewhat to get the bolts started.

Aug 19, 2011 | 1996 Pontiac Sunfire

1 Answer

How do I change front struts on a 2007 tundra


Please don't forget to rate!

  1. Before servicing the vehicle, refer to the Precautions section.
    1. Remove or disconnect the following:
    2. Front wheel
    • Strut-to-lower control arm nut/bolt and the strut
    • Strut-to-chassis nuts/bolts and the strut

  • c17hydro_31.gif

    Lower control arm Tundra


    To install:

    1. Install or connect the following:
      • Strut to the chassis. Torque the nuts/bolts to 33 ft. lbs. (45 Nm).
      • Strut to the lower control arm. Torque the nut/bolt to 144 ft. lbs. (195 Nm).
      • Front wheel
    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 31; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

    Nov 20, 2010 | 2007 Toyota Tundra

    1 Answer

    I have a 2001 oldsmobile silhouette and I need to change the spark plugs I see the three up front but I am not sure how to get to the three in the back?


    You'll have to rotate the engine forward.Remove the air cleaner duct and accelerator cable.Place transmission in neutral(Block rear wheels). Remove the two bolts and detach driver's side torque strut(front engine mounts) .remove one bolt from radiator side of the passenger side torque strut. Use a ratchering strap attach to radiator support and engine lifting eye,rotate engine forward. remove coil pack to ease access to spark plugs. Good luck!!

    Sep 29, 2010 | 2001 Oldsmobile Silhouette

    1 Answer

    Noise in back shock absorbers after replce them, I want to know if there are some bushings located?


    DID YOU TORQUE STRUT CARRIER BOLTS TO 60 FT LBS AND TORQUE UPPER MOUNTING NUTS TO 22 FT LBS. IF YOU DIDNT TIGHTEN ALL BOLTS AND NUTS YOU WILL HEAR REAR STRUT NOISE.

    Sep 02, 2010 | 2003 Hyundai Tiburon

    1 Answer

    How to do 2002 oldsmobile silhouette strut replacment.


    best why to change at home is go get a whats called kwik strut from part sourse. comes with spring and strut already complet. if you dont have a good spring compresser you can kill your sell takin them apart.

    Apr 25, 2010 | 2002 Oldsmobile Silhouette

    1 Answer

    Replacement procedures for front struts on chevy venture lx


    lift and safely support vehicle (jack stands),remove wheel and tire assemblies, remove strut to knuckle bolts (two bolts and nuts located directly above the brake rotor very tight),then under the hood you will locate the top strut mount nuts and remove them(you may need to remove wiper linkage to do this) when you are ready to remove the last nut have an assistant hold the strut so it doesn't fall take the strut to a machine shop to get the cartridge changed (most napa stores are also machine shops go to napa online to find the one near you)
    installation is the reverse of removal some cars require alignment after strut change torque specs are as follows strut to knuckle bolts 90-120 ftlbs upper mount nuts 40-60 ftlbs wheels 100 ftlbs

    Sep 23, 2009 | 2003 Chevrolet Venture Passanger

    1 Answer

    Need info on replacing front strut 2003 gmc envoy


    A: Use two jack-stands under the front-frame rails, a hydraulic jack under the "bulb" in the control-arm and a third jack-stand under the "spindle extension" of the rotor. It's not necessary to remove the calipers and/or rotors. The upper strut-mounts might need to be forcibly loosened and then removed. If the old struts are worn out enough, they should just compress by themselves. The new struts should be able to be compressed by hand and then positioned in place as fast as possible, before they extend.
    For the strut-to-knuckle bolts to loosen, use a pipe extension to the fixed driver of the socket-set. To tighten these bolts, first torque them to 170 Nm and then give them an additional turn of 120 degrees. For the latter, use the pipe-extension again

    Jun 29, 2009 | 2003 GMC Envoy

    Not finding what you are looking for?
    2003 Oldsmobile Silhouette Logo

    Related Topics:

    23 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    76051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8265 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...