Question about Subaru Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the only way to get the water out isto drill a hole in the bottom of the headlight assemly. they don't come apart. drill very slowly.
hope this helps
please rate well.
Posted on Mar 06, 2009
Open hood and look at the left side of engine (your right side looking at it) Its close to the corner, near firerwallon top. Just match the old filter with the new.
Posted on Apr 12, 2009
is the blower motor not blowing or the fan on the radiator not working? didn't say exactly which it was. If it's the blower motor and the fuse is good, it could be one of 4 things. Broken wire, bad fan speed switch, bad resistor switch (controls fan speed) or bad blower motor. Check for power to the fan speed switch, if it's good move to the resistor switch( this switch is normally located near the blower motor and is bolted to the air box to keep it cool) Pull it out and check it. It could be burnt up. If so, replace it but before doing so check to see if your blower motor works by hooking it straight up to a power source. Most of the time on older vehicles the resistor goes out due to excessive dust build-up and finally burns the coils out or it just dies of old age.
Posted on Aug 16, 2009
Tips for a great answer:
Jan 26, 2014 | 1992 Subaru Loyale
Dec 02, 2012 | 1994 Subaru Loyale
Nov 06, 2012 | 1991 Subaru Loyale
Aug 19, 2010 | 1991 Subaru Loyale
Aug 06, 2010 | 1991 Subaru Loyale
Jan 22, 2010 | 1993 Subaru Loyale
Jan 13, 2010 | 1991 Subaru Loyale
Dec 07, 2009 | 1991 Subaru Loyale
Jan 24, 2009 | 1991 Subaru Loyale
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: