Question about Chevrolet Silverado
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Are you sure you have the plug wires on the right location on the distributor cap? You'll need to have a diagram to check by. If you're off 1 placement to the right or left it won't start.
Posted on Mar 18, 2009
The ignition switch is mounted on the top of the steering collumn, and is connected to the switcth with a rod. Top of column down by the pedals.. Remove and test switch.
Posted on Jun 03, 2009
the code you show is for the oxygen sensors post convertor. replace both the o2 sensors after the convertor and the code will go away on its own after a couple normal condition drive cycles
Posted on Jan 02, 2010
Testimonial: "Thanks, Dave, although i don't have codes to replace 02 Sensor's, and the truck runs fine will possible cleaning them help, they're only 100.00 bucks?"
make sure filter was not installed backwards,then check fuel pressure at reed valve on fuel rail,you will need at least 55psi of fuel pressure to start truck
Posted on Jan 24, 2010
I had the same problem and replaced the Dist. cap and rotor it had moisture in it and was corroded.
once replaced had no problems.
Posted on Apr 30, 2010
Tips for a great answer:
Jan 08, 2014 | Chevrolet Chevy Cars & Trucks
Jul 12, 2012 | 2000 Chevrolet Silverado 1500
Dec 20, 2010 | 2004 Chevrolet Silverado 2500HD
Oct 30, 2010 | 1999 Chevrolet Silverado 2500
Jan 25, 2010 | 2001 Chevrolet Silverado 3500
Dec 22, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab
Oct 15, 2009 | 2004 Chevrolet Silverado 3500
Mar 09, 2009 | 1999 Chevrolet Silverado 1500
Feb 28, 2009 | 2004 Chevrolet Silverado
Dec 20, 2008 | 2000 Chevrolet Silverado 1500
19 people viewed this question
Usually answered in minutes!