Question about 2005 Chevrolet Impala Sedan
Hope you have a switch inside the vehicle to do this. Usually they hide one in the glove box or a handle that operates a cable by the driver seat depending on the model.
Posted on Dec 30, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
• A module which communicates on the class 2 serial data circuit which supplies VIN information to the radio is replaced and not properly setup with the correct VIN information for that vehicle. The only way to unlock the radio is by using a scan tool.
Posted on May 15, 2009
if it doesnt turn you have a worn out ignition cylinder, the only fix is to replace it, Code the ignition lock cylinder, if necessary
CAUTION:Perform the body control module (BCM) theft deterrent relearn procedure whenever you replace the ignition switch lock cylinder.
Posted on Sep 08, 2009
First....buy a drivers side air flow actuator at a auto parts place for dual zone heating/cooling.
(NAPA etc will have it.....or the dealer)
Open the glove compartment.....all the way....you may have to take the screws out at the bottom......look in at the heater assembly....look over to the left....you will see the two air flow actuators.
Look at the part you have and match it to the part on the heater assembly.
The actuator that is closest to the engine is the drivers side control.
Try your controls and check for heat and cooling on both sides.
The stepper motor in these actuators goes bad on quite a few...but over look that.....you have a great car,good for many miles of trouble free driving.
Posted on Nov 03, 2009
Just beneath the latch ,you can see a clip,turn it up and close the trunk.Try opening it with the button near dash or remote.It should work.They designed it to avoid theft during vallet parking.The main key(steel one) is used only for ignition.There is another key(with a black rubber head) is for ignition and trunk.So if you want to avoid missing any items from trunk using vallet parking,use the main key,put the clip down and hand that to the person who is assisting you during vallet parking.
Posted on Jun 09, 2010
Tips for a great answer:
Jun 13, 2017 | Cars & Trucks
May 04, 2015 | 2006 Chevrolet Chevrolet Impala LT
Jan 04, 2014 | 2007 Chevrolet Impala LS Sedan New Cars
Aug 28, 2013 | 2005 Chevrolet Impala
Jan 29, 2013 | 2005 Chevrolet Impala
Sep 24, 2012 | 2008 Chevrolet Impala LT
Oct 26, 2010 | 2005 Chevrolet Impala
Jan 10, 2010 | 2005 Chevrolet Impala
Oct 13, 2009 | 2003 Chevrolet Impala
Apr 11, 2009 | 2005 Chevrolet Impala
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: