Question about Pontiac Bonneville

1 Answer

How to hotwire a 2000 Pontiac Bonneville

I have lost my keys at a salvage yard.And I don't kno2 were I have lost them so I broke the tumbler out because I don't have the money to get a key

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 11,022 Answers

Good luck ! Anti-theft system won't let the car start . You need a key that has transponder embedded in the head of the key ! Emits a code to the VTD Controller Module . Plus the body control modules that control vehicle systems won't work either . These vehicles are made so as not to be hot wired . Breaking the lock cylinder you just cost yourself extra money . Your going to have to take your vehicle to a qualified repair shop .
The body control system consists of the following three modules:
• The dash integration module (DIM), located behind the instrument panel, above the right dash sound insulator.
• The instrument panel module (IPM), located behind the instrument panel, above the left dash sound insulator .
• The rear integration module (RIM), located at the left hand rear of the passenger compartment, behind the seat back.

Posted on Dec 27, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 volvo v50 key stuck in ignition vehicle totally shut down


It is best to call a locksmith, unless you know how to take apart the ignition tumbler and put the assemly locks in the correct order. It sounds like the key tumbler hold in broke and all the tumblers are loose and causing the key to be stuck. If you want to hurry the job for the locksmith and save money, buy the key tumbler assembly for your vehicle for the locksmith to install. Otherwise he will have to make the trip to buy the assembly, which in turn costs you more money. Mechanic shops can replace key tumblers too but when it is stuck in the column, it takes a lot of effort to remove if they are unskilled.

Jun 06, 2016 | 2007 Volvo V50

1 Answer

How can i stop a atd killswitch in a from turning on when driverside doorlock doesnt work and only have 1 key to car and no alarm clicker either


Most car alarm and stereo installers may be able to help you. I took apart the driver's door lock on one vehicle, removed the tumblers and reassembled it but eventually someone messed with it and I was stuck

Jan 26, 2015 | 1990 Lexus LS 400

4 Answers

1997 cavalier ignition switch--the key enters the switch and is easily removed. but the key when entered in the ignition will not turn to start the car. The whole ignition switch turns slightly when you...


look at your key if its worn down try another key if both keys are same way than u will need to replace the ignition cylinder not the switch these are 2 units which are attached, the tumblers are in the cylinder--- u can have the cylinder re done[new tumbler ] diy u can take out housing and bring to dealer saves on labor or if have local bone yard buy housing [ignition ] with key take out cylinder and replace with new junk yard part about 15-75 bucks a lot of the u-pull-it are the cheapest 15 for whole system---dealer to redo cylinder[tumbler replacement] with u bringing in housing 100-200---if cylinder also damaged add additional 100-- call up parts person and get prices tumblers/cylinder/whole unit good luck

Jul 07, 2011 | 1997 Chevrolet Cavalier

1 Answer

Have lost key dont have any and no dodge dealership in town


salvage yard., Get you another ign. switch / key.

Mar 19, 2011 | 2001 Dodge Ram 2500 Truck

2 Answers

Someone broke in my 2002 ford explorer and try to hot wire the car. he fail but left me with a mess. the steering column is broken wire is cut. i want to fix this on my own because anywhere i ask to fix it...


get a doner stearing column from nearest salvage,(thats what i would try). youll prolly have to buy a new key tumbler assembly and program the key to the computer anti theft sytem.
to program the new key, assuming all goes well with the new column and the new key tumbler,put the new key in ignition, turn key on for 15min, time it with a watch. after 15 min turn key off.
wait 15 more minutes. time that,
now after the 15 minutes u should b able to turn key on and start the vehicle.
the key tumbler/key switch kit should come with those instructions.
also if u buy a doner stearing shaft, i like when they let me pull it, lock the stearing wheel w/key so it doesnt turn.
there is a sensor called the "CLOCK SPRING," if u turn the wheel to far around while disconecting the stearing shaft at the bottom of column, u ruin this sensor and end up with a airbag lite on.
so b careful not to rotate the wheel more than two times in one direction the sensor is about 119 bucks u dont have to remove the stearing wheel to swap the column assemblys

Mar 23, 2010 | 2002 Ford Explorer

1 Answer

Removal and replacement of key tumbler 1994 Ford explorer


look at the steering column below the ign lock and tumbler there should be a small hole turn key to on pos and push a small rod up the holethis then should release the lock and tumbler,no hole then wheel and coumn has to be stripped to get to lock retainer

Oct 05, 2009 | 1994 Ford Explorer Limited

1 Answer

Ignition switch jams up; tumblers don't aline


dont think its cheap. id try a local parts store for prices they should be able to give u a proce check around or try something like a salvage yard for used one. try www.speedwayap.com for used parts they have always been helpful for me.

Oct 03, 2009 | 1999 Toyota Camry

1 Answer

Getting into the run position without keys


not easy but u need to take the tumbler key out so i do this get a punch aim at the key n hit it till the tumbler is out good aiming

May 25, 2009 | 1994 Buick Century

1 Answer

Ignition switch repair on a 1997 Pontiac Sunfire


You may have to change the ignition switch. Poss salvage yard or parts store. I hope this helps!

Jan 30, 2009 | 1994 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...