Question about 2010 Lexus GX 460

1 Answer

I have a Lexus GX460 2010 model, all of a sudden it started showing me 4lo, check traction and P anytime I start the Vehicle. please what is the cause and what is the possible solution?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexus Master
  • 660 Answers

There was a recall issued that said the ECM needed to be reflashed.
Contact a dealership service writer and have the VIN number handy. They will check to see if the recall work was ever done on your vehicle.
Although that recall was for the stability control, it's a possibility

Posted on Dec 28, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75108 Answers

SOURCE: The check engine light is permanently on and 4LO has been blinking on my 2011 Lexus 460

This is a warranty issue see the dealer, do not repair it yourself or touch the engine.

Posted on May 30, 2012

txkjun
  • 409 Answers

SOURCE: vehicle cant start fuel supply ok ingnition ok engine comprassion is ok

If oyu have spark, fuel and compression the engine should start.

Posted on Feb 15, 2009

mkv0525
  • 358 Answers

SOURCE: 92 lexus ls 400 check engine and traction control light came on at the same time, 92 lexus ls 400.

the track off light will come everytime yhe check engine light comes on. this is normal. you need to have the check engine light checked first.you can go to your local parts house they will scan it for so you at least see what area you problem is in and then you can start from there. let me know lf you find out youe engine codes.

Posted on May 27, 2009

michigan man
  • 3533 Answers

SOURCE: engine lights

if you have Autozone or Advance auto part store near you they will check it for free and let you know what is wrong and also reset the light for you give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Posted on Mar 13, 2010

  • 14585 Answers

SOURCE: 4LO has been blinking and check engine permanently on,on my Lexus 2013 570,what can I do

First have the codes read. 4LO cold be the switch, controller or the module. Engine light, Well anything to do with the drive train.

Posted on Aug 05, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2007 Jeep Liberty has started to "shimmy" when I put in in reverse and when I'm pulling into a parking space. I have it in 2wh drive but it feels like it's in 4wh. Any advice?


are you using 4wd /yes /no
are you on ice, or off road?
or just pavement ice free,
we cant guess that. and is KEY
car comes new with 3 different 4wd systems
first 2 are part time
and last full time 4wd and 4lo (PT)
all three stay out of
part time on icefree pavement
4lo is part time too, and same rules its for offroad only.
sure
the cluster has 3 lamps
fulltime
part time
and
4 LO
tell me, does or has fulltime ever come on in 4wd
if yes,its AWD jeep.
if not the car is part time, in 4wd
and is only for iced roads or offroad.

5min work look at rear of transfer case
bingo, now you know what you got

834e2ce0-95c6-4904-a465-165e81f3b9c1.jpg

Feb 17, 2017 | 2007 Jeep Liberty

1 Answer

4LO has been blinking and check engine permanently on,on my Lexus 2013 570,what can I do


First have the codes read. 4LO cold be the switch, controller or the module. Engine light, Well anything to do with the drive train.

Aug 05, 2016 | Lexus Cars & Trucks

1 Answer

What is a vsc in a toyota aurion?


VSC Is ..Vehicle Stability Control..It is a control system for traction loss,scidding,.If one tire loses traction it will light up..It shouldn't interfere with starting...Make sure all CV Axles for drivetrain isn't damaged...?..Did this happen all of a sudden..?..You can wear safety glasses and disconnect negative battery to erase the code and reset the computer..Reconnect and then try to start it..Be sure car is in park..!

Feb 20, 2015 | 2008 Toyota Camry

1 Answer

Lexus fault codes erased


Yes the computer will reset itself if the trouble goes away. This is common thing. You probably had something in your traction slip. I would not worry about it.

Jun 01, 2017 | Lexus Cars & Trucks

1 Answer

When i move the car at a point VDC off and slip comes up and the vehicle shuts down, when i start back the engine starts and the signs remain, what could be the solotion to this?


If the vehicle is on a slippery surface, then you are basically describing normal traction control system operation. This system will halt spark to the plugs so that the engine can no longer power the wheels and cause them to slip. Engine performance will pick up again once the wheels find traction.

Is this what you are describing? Not all vehicle traction control systems can be shut off 100%, even when the switch is set to off.

Does this issue occur on all road surfaces and conditions?

Nov 04, 2012 | 2005 Nissan Pathfinder

1 Answer

Had new tires put on car yesterday and traction control and engine check light have come on today on 1999 lexus es300


Any time the check engine light comes on the traction control will be disabled and the light will also come on. Start with scanning the engine computer for trouble codes to see why the check engine light is on.

Sep 20, 2012 | 1999 Lexus ES 300

1 Answer

Anti lock,trac off,service vehicle,check engine lights are on &the brake pedal starts to stop then slips with humming sound repeatedly so what is it?


Year make and model?

You'll need to start by pulley codes. There could be more than one problem, but your description sounds like a condition known as overactive ABS. This is caused by a wheel speed sensor dropping or loosing its signal at slow speeds which fools the ABS into thinking the wheel locked up.

Each wheel will have a sensor so having the code information will make it a lot easier to determine which wheel is having the problem.

the traction control light will come on anytime the ABS light is on because the traction control relies on the ABS to function correctly. Usually the check engine light will not come on when there is an ABS issue which leads me to believe there are two issues.

Oct 14, 2010 | Buick Regal Cars & Trucks

1 Answer

My lexus just quit working, it will crank but die when you put it in gear, the check engine light came on with a code of VSC any ideas. Thanks.


Saw this on a Lexus user club site ---
  • Vehicle Skid Control (VSC) senses the onset of loss of lateral traction and helps the driver stay on track. Input from four wheel-speed sensors, a yaw-rate (directional) sensor, a deceleration sensor, and a steering-wheel-angle sensor is communicated to the VSC computer. The system has the ability to reduce power and to control the brake actuator. Working with both ABS and TRAC, the VSC system helps the driver to compensate for loss of lateral traction, which can cause skids and loss of vehicle control. Lexus Vehicle Skid Control (VSC) is an electronic system designed to help the driver maintain vehicle control under adverse conditions. It is not a substitute for safe driving practices. Factors including speed, road conditions and driver steering input can all affect whether VSC will be effective in preventing a loss of control.
However, it appears Lexus owners who have reported this sort of problem did not have to do anything to fix except - things like .. uncap gas cap and put it back, remove battery leads for about 10 minutes and put back, tighten air filter hose ...all wierd.

Have you checked your owner's manual ?

Dec 24, 2009 | 2007 Lexus RX 350 FWD

1 Answer

My 4x4 switch the lights are not showing at all


check fuse?

Mine did this but all of a sudden started to work again after about a week

Dec 19, 2009 | 2002 GMC Envoy

1 Answer

92 lexus ls 400 check engine and traction control light came on at the same time, 92 lexus ls 400.


the track off light will come everytime yhe check engine light comes on. this is normal. you need to have the check engine light checked first.you can go to your local parts house they will scan it for so you at least see what area you problem is in and then you can start from there. let me know lf you find out youe engine codes.

May 27, 2009 | 1992 Lexus LS

Not finding what you are looking for?
2010 Lexus GX 460 Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...