Question about Jeep Liberty

2 Answers

Jeep 2012 liberty blew fuse for door locks and windshield cleaner fluid pump not working. replaced fuse number M38 and it blew instantly.

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Front or rear washer failure?
Car drives perfectly, ? head lamps work and not dim?

sure and you didnt scan it first, the TIPM would tell you whats up.
but you didnt scan it first.
this is a classic elect, failure
the fuse if right sized tells you there is a SHORT on that feed,
id drew infinite current for milliseconds and boom blew the fuse.
so what do you do, lacking tools?
well, remove all loads on that feed, first.
then put them back 1 at a time and the one that blows the fuse again, is Bad.
if it blows with all loads removed the harness is shorted.
electrics 101, end.

is it freezing there,?????
is the windshield waster full; of ANTIFEEZE rated cleaner\if not
the it freezes the pump and it draws huge currents.
if true dont do that.
or it repeats.
"Door and Liftgate Lock/Unlock Motors"
is yours blowing 25amp fuse m38?
my book says front waster is J21 fuse .
are the doors freezing up with ice?

Posted on Dec 27, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

Dead short to the wiring on one or all of the things you mention -remove battery terminals first then check all the wiring connecting the things you mention here look for sooty marks on places where the wiring touches the body

Posted on Dec 27, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wheres the fuse for windshield washer fluid

Why Won't My Windshield Washer Work? - RepairPal > Car Care Advice > Troubleshooting
Check the Fluid First, check that the windshield washer bottle has fluid and that ... If the pump is not heard, check the fuse panel to see if there is a blown fuse.

Windshield Washer Pump and System Diagnosis - YouTube

? 10:00
Sep 9, 2012 - Uploaded by RatchetsAnd Wrenches
Here is a step by step guide to diagnose any trouble with yourwindshield washer pump, or other issues that ...

Dec 26, 2015 | Cars & Trucks

1 Answer

How can I fix malfunction in jeep liberty alarm?

it is stuck in anti theft mode you try disconnecting battery and see if it helps. You will have to reprogram as well.

Apr 29, 2014 | 2012 Jeep Liberty Sport 4dr SUV 3.7L V6...

2 Answers

Rear windshield wiper sprayer doesn't work but the fronts work fine 2002 jeep liberty limited

The rear wiper has its own pump motor. pull the hose from the wiper and have someone engage to see if there is a clog. do the same at the motor. if bo liquid comes out then its the pump. also check fluid level in reservoir as well as a possible secondary reservoir

Dec 01, 2012 | 2002 Jeep Liberty

1 Answer

Where is fuse for wiper fluid pump on a 2003 cavalier?

It can be faulty wiper motor or blown wiper control fuse.

Do you hear any kind of noise when you starter the wiper function. If yes then fuse is ok, but issue is wiper motor.

If no movement at all and no noise then its blown fuse or shorted/loose wiper control wiring:-----

For complete troubleshooting i suggest you few helpful links with accurate solutions.


Click the link below:-------

1993 Ford F350 wipers not working?


How to Replace a Windshield Wiper Motor


Wipers not working, but hear relay click on Lincoln LS?


Car windshield wiper gets power for movement and stops?


How does cars Windshield Wiper System Works


1997 Honda Protege: Replace Wiper Transmission?


Windshield wiper fluid container leaking?


Where is wiper fuse located on1993 chevrolet suburban


2002 Toyota Sienna: Wipers and Passenger side Power window stopped working?


Complete wiper components replacing details for Acura Car Models?


These details will help.


Nov 28, 2012 | 2001 Saturn S-Series

1 Answer

Both of my brake lights are out on my 2007 Jeep Liberty and I don't know how to replace the fuse

Your fuse box is on the drivers side dash. You can see the cover for it if you open the door. The fuse you need is in the number 12 cavity. it is a blue 15 amp fuse. Just pull it out see if it is good, if it is bad, replace. If it is blown you may have other problems as there was a reason it blew. your brakes light switch may be bad but check the fuse first. I hope this helped and good luck.

Feb 07, 2011 | 2007 Jeep Liberty Sport

2 Answers

My daughter's 2005 Jeep Liberty's windshield washer fluid won't pump out when you pull the wiper handle back. I don't even hear a motor trying to pump it out. What do you think the problem could be? I...

The only other two options are:-

1) The washer/pump motor has failed, needs replacing.
2) There's a bad contact/connection between switch and motor, check contacts first, clean and make good, if still no go, then you're back to option 1.

Jan 30, 2011 | 2005 Jeep Liberty

1 Answer

Windshield washer fluid pump does not work

check to see if you have power to the motor if you do replace the motor if not check the fuse 1st than the switch if still not working your going to have to trace the wiring

Aug 30, 2010 | 2008 Jeep Liberty

1 Answer


bad pump yes! also ck the current to the pump. if there is no current going to the pump unit then ck your fuses and wind shield switches

Dec 27, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides