Question about Cars & Trucks

Open Question

8dc9 engine main cap torque - Cars & Trucks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stevenhurc
  • 450 Answers

SOURCE: torque specs for big ends, mains, cam caps

found local Adelaide engine reconditioning shop that knows all about g200 twin cam EFI isuzu motors for parts and engine components ( pistons, rings, bearings etc. ) and machining, Chris Milton engine reconditioning. They will do machine work for me so then i can put it together.

Posted on May 27, 2009

  • 167 Answers

SOURCE: WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN

Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Posted on Jul 10, 2009

  • 27 Answers

SOURCE: i need all torque specs main bearing caps

haynes manual is the best way

Posted on Oct 07, 2009

  • 492 Answers

SOURCE: have 97 caravan 3.3 and

http://www.pdfstock.com/d/1997+dodge+caravan+specs this link will have the pdf file for your engine.

Posted on Apr 20, 2011

  • 27 Answers

SOURCE: Main Bearing Torque for 1995 Ford Escort Model J engine 1.9 ltr

67 to 80 ft lbs

Posted on Jul 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What the torque specs. For a 2002chevys10 4.3vortex mains and rod bearing


Torque Specs Database

Type: Dim: Length: Head: Nut Grade: 20 Ft-Lbs 240 In-Lbs 27.12 N-m Connects: Connecting Rod To Engine Block Years: All Vote Record: Vote Note: Vortec - Rod Cap Nuts - 2 Steps: 20 FtLbs; +70degs

http://ww2.justanswer.com/uploads/ZZdaryl/2009-06-14_153454_torque.pdf

Main Bearing Cap Bolt 4.3L Step 1 15 ft lbs (20) Step 2 Additional 73 Degrees

i don't know if that's correct for main bearing caps since another link states it's much higher

4 3 Vortec Piston Specs eHow

hopefully a GM guy will chime in to confirm the main bearing torque

the rod bearing torques are the same on all the other links

Mar 25, 2015 | 2002 Chevrolet S-10

1 Answer

Torque settings on cranck sharf bearings


Torque settings for V-6 engine.
Main bearing cap bolts torque:
Torque: 27 N·m (275 kgf·cm, 20 ft·lbf)
Mark the front of the main bearing cap bolt with paint.
Re tighten the main bearing cap bolts by 90 degrees.
Check that the crankshaft turns smoothly.

Connecting rod cap bolts torque:
Torque: 24.5 N·m (250 kgf·cm, 18 ft·lbf)
Mark the front of the main bearing cap bolt with paint.
Re tighten the main bearing cap bolts by 90 degrees.
Check that the crankshaft turns smoothly.

Feb 11, 2014 | Toyota Land Cruiser Cars & Trucks

1 Answer

Tercel 1992 main bearings torque


The Main Bearing Cap TorqueTo install:
  1. When reassembling, clean the bearing caps and journals in the block thoroughly. Coat the bearings with a liberal application of clean motor oil.



0900c15280051ec0.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Always torque the bearing caps to specification


0900c15280051ec1.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Main bearing cap bolt tightening sequence on 3E and 3E-E engines

  1. Fit the upper bearings halves into the block and position the lower bearing halves in the bearing caps.
  2. Place the crankshaft into the engine block, making sure it fits exactly into its mounts.
  3. Install the upper thrust washers on the center main bearing with the oil grooves facing outward.
  4. Install the main bearing caps and the lower thrust washers in the proper sequence. Make sure the arrows on the caps point towards the front (pulley end) of the motor.
  5. Tighten the cap bolts to specification in three passes. On 3E and 3E-E engines, use the correct sequence.
  6. Double check the end-play of the crankshaft by repeating the procedure described earlier.
  7. Turn the crankshaft through one or two full clockwise rotations, making sure that it turns smoothly and evenly with no binding.
  8. Attach the piston rods, following procedures given earlier in this section. Remember that the rod caps must be reinstalled in their original positions.
  9. Install a new rear main oil seal into the retainer and install the retainer onto the block. Tighten the bolts to specification.
  10. Install the rear end plate on the engine.
  11. Install either the driveplate (automatic) or the flywheel (manual), observing the matchmarks made during removal.
  12. If equipped with a manual transaxle, reinstall the clutch disc and pressure plate.
  13. Install the oil pump.
  14. Install the oil strainer and oil pan, using new gaskets.
  15. Rotate the engine into its upright position and continue reassembly of the timing belt, idler pulley and covers.
  16. Reinstall the engine in the car, following procedures outlined earlier in this section.
42 Foot pounds (Final torque)

Dec 15, 2012 | 1992 Mitsubishi 3000GT

2 Answers

What are the torque specs for the Main Bearing Cap bolts on a 1990 CHEVROLET TRUCK C1500 5.7l 350


main caps 85 ftlbs (3divdedsetings30ftlbs all 50 ftlbs all ending at85ftlbs click, rocaps 45ftlbs, head bolts 85ftlbs workingfrom cdenter top ,center botom ,top center working clock wizeand out ,intake boltes45ftlbs again fromcenter working outleft side, right side,left, right 8 bolts one time only or u will distort gasket. oilpan from center alternate L side ,R side,clock wize25ftlbsclick recheck after breakin period valve covers 25ftlbs anrecheck flywheel 90ftlbs ,harmnic balancer bolt 75ftlbs, add oil!!!!run for 15 minutes drain oil &change filter run for 100miles for molly rings 10 mmiles for cast rings .let engine cool down retorque headbolts,replace valve covers .run it and get on it!!! good luck hve fun.

Aug 20, 2012 | 1990 Chevrolet C1500

1 Answer

Torque specs for rod & main brgs for 1994 ford f150, 300 6 cyl fuel inj engine


Main Bearing Cap Torque:
Torque in 2 steps: Step 1: torque to 35 Ft/Lbs Step 2: torque to 70 Ft/Lbs

The Rod Bearing Cap Torque: 45 Foot pounds (Final torque)

Was this what you needed...let me know by your rating of me...thanks!

Sep 17, 2011 | 1994 Ford F150 Styleside Supercab

1 Answer

Need to know crankshaft main bearings and rod bearings torque specks.


2 Different size engines for that year. If you have the 2.2 the main bearing caps are 70 ft/lbs (final torque) & the rod bearing caps are 38 ft/lbs (final torque). If you have the 4.3, the main bearing caps are 77 ft/lbs (final torque) & the rod bearing caps are 45 ft/lbs (final torque). I hope this helps and good luck.

Mar 13, 2011 | 1996 Chevrolet S-10 Pickup

2 Answers

Torque settings for a hyundai accent 1500 1998 model torque settings for head , conrods and crank


cylinder head bolt torque

52-55 ft lbs. cold engine
59-63 ft lbs. hot engine

connecting rod cap nut 26-28 ft lbs. SOHC
connecting rod cap nut 23-26 ft lbs. DOHC

main caps 41-44 ft lbs.

Dec 19, 2010 | Hyundai Motor 1998 Accent

1 Answer

Need torque for a 2000 Toyota Celicia GT 1.8L


Crank Main caps Tightening Torque

For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.

Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)

Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90° more
4. Check that the crankshaft turns smoothly.

moz-screenshot.pngmoz-screenshot-1.png

Mar 18, 2010 | 2000 Toyota Celica

2 Answers

WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN BEARING AND BIG END BEARING CAPS FOR ISUZU 4JG2 ENGINE


Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Jul 10, 2009 | 1994 Isuzu Trooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...