Question about Cars & Trucks

Open Question

No sound from my monster 10667 jukebox after power button is pressed on

Everything works ok

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My mardigras jukebox went bang ,blew my electric now it has no power I've checked fuses they look ok

LOOKING Ok does not mean much if you do not test them with at least a continuity tester .but a voltage tester would be better

Oct 08, 2016 | Cars & Trucks

1 Answer

Alarm goes off when entering car

Everything is obviously working ...
It sounds as though you have a 'sticky' button on your remote. Very common..

Feb 17, 2016 | Cars & Trucks

1 Answer

Radio and cd work ok but no woofer speaker, only tweeter on right side fron and rear

Andy check speaker connections and wire for damage, hook up a temp speaker to see if it fixes the problem, if it does replace speaker, if it does not, then there is a problem with radios amp.
to show your appreciation press the helpful button and follow me on fixya for more tips and info.

Feb 15, 2016 | Cars & Trucks

1 Answer

Audio has no sound

I had the same problem. Everything worked except the sound. There is a small button next to the CD player that is a reset button. Press that and the audio came back. You have to reset your presets but at least the sounds works.

Jan 09, 2013 | 2012 Hyundai Elantra

1 Answer

What size are the fans on a 1999 chrysler 300m


  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jun 14, 2011 | 1999 Chrysler 300M

1 Answer

The horn just makes a clicking sound which sounds like its coming from the glovebox?

The clicking sound is probably the horn relay. Check for power at the horn wire when button depressed and that the horn is grounded. If everything checks out ok replace horn with known good part.

Feb 15, 2011 | Ford Focus Cars & Trucks

1 Answer

Honda Odyssey 2004 no alarms

There is most likely a reset button under the dash somewhere. You can try pressing and holding that button down while pressing the lock button on the remote. If this does not work simply have the dealer reset it for you.

Jan 06, 2010 | 2004 Honda Odyssey

1 Answer

2000 dodge caravan needs remote programming

ok here is the procedure

make sure your remote works and the battery is good.

turn key on, press and hold the unlock button for about 5 seconds while still holding the unlock button press the panic button one time, release both buttons.

a single chime will sound indicating programming is ready, now press any button on all transmitters, after you have pressed a button on all transmitters to be programmed turn the key off.

programming is now complete.

Jun 14, 2009 | 2007 Dodge Caravan SXT Minivan New Cars

4 Answers

Van horn wont work

If your Air Bag light light is aluminated and The Cruise Control does not Work then the Problem is in the "CLOCK SPRING" this Component is Located Under the Steering Wheel and it requires the Steering Wheel to Be Removed.You Must have Complete Instructions on this Procedure or Injury Can Be the result.

Feb 02, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15360 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides