Question about 2008 Buick Enclave

Open Question

I need a diagram on how to put a serpentine belt on a 2008 Buick Enclave motor size 3.6 liter engine

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ford lincolin Ls serpentine belt diagram


There are 2 different engines for this year LS listed and you didn't mention your engine size. Below are the diagrams for both. The first picture is for the 3.0 liter engine and the second diagram is for the 3.9 liter engine. Hope this helps....

4_1_2012_10_59_03_am.jpg

4_1_2012_10_59_22_am.jpg

Apr 01, 2012 | Cars & Trucks

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Need diagram of drive belt assembly forcaddy


    You didn't list your motor size so please pick the applicable diagram:

    ba0b112.gif
    Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines

    9dcebd3.gif
    Accessory serpentine belt routing—5.7L engines with A/C

    bb89ba7.gif
    Accessory serpentine belt routing—5.7L engines without A/C

    27f4999.gif
    Accessory serpentine belt routing—6.5L Diesel engines

    4d67005.gif
    Accessory serpentine belt routing—7.4L engines

    491a0a4.gif
    Accessory serpentine belt routing—8.1L engines

    Oct 26, 2009 | 2002 Cadillac Escalade Ext

    2 Answers

    Change alternator belt on 1996 buick riviera


    The 96 Riviera has a motor mount that interferes with the removal and replacement of the serpentine belt. The motor mount must be loosened and the engine need to be lifted slightly to accomplish the replacement. Not good engineering on this model year.

    Aug 26, 2009 | 1996 Buick Riviera

    2 Answers

    Diagram needed


    HELLO THERE: Here is a link that will help you out ok dont forget to rate this soultion this helps me out too 1994 buick lesabre serpentine belt removal 1994 buick lesabre serpentine belt removal. Custom made wrestling belts ... money belt zipper. chest injuries from seat belts. serpentine belt diagram 30 mitsubishi ...beltpedia.info/1994-buick-lesabre-serpentine-belt-removal.html

    Aug 15, 2009 | 1994 Buick LeSabre

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    49 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7754 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...