Question about Mahindra Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: head bolts torque settings
According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.
Posted on Feb 07, 2009
SOURCE: Angle Torque settings head bolts
Use new bolts, tighten in the following stages
3. wait 3 mins
4. slacken bolts 1&2 retighten to 20Nm +110 degrees
5. carry out stage 4 for bolts 3,4,5 & 6
then bolts 7,8,9 &10
8 4 1 5 9
7 3 2 6 10
Bolts 9 & 10 are flywheel side of the engine.
Posted on Mar 17, 2009
assuming this is the "C" engine 8th digit on VIN plate. Use new bolts. torque first step to 25lbs, 2nd 50lbs, then 3rd 50lbs, then 1/4 turn.
Posted on Sep 23, 2009
stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
5 2 4 8
Posted on Dec 05, 2009
Tips for a great answer:
Jun 09, 2018 | Mahindra Cars & Trucks
May 13, 2018 | Mahindra Cars & Trucks
Dec 18, 2017 | Mahindra Cars & Trucks
Jan 24, 2016 | Mahindra Cars & Trucks
Nov 01, 2015 | Mahindra Cars & Trucks
Apr 07, 2015 | Mahindra Cars & Trucks
Jan 06, 2015 | Mahindra Cars & Trucks
Jul 15, 2010 | 1985 Chevrolet Camaro
Jul 15, 2018 | Mahindra Cars & Trucks
May 20, 2018 | Mahindra Cars & Trucks
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: