Question about Isuzu Cars & Trucks
Gas tank neck that you put your gas thru to get to tank! mine has a small hole leaking on to the ground when I pumping gas
no country stated, my guess USA rodeo.
no engine stated, there are gas or diesels
and different sizes. no size stated or cylinder count
fuel systems match that.'
if no idea at all what cause that leak, why not ask your mechanic to look and see what is actually leaking
are you in the RUST belt.? (wiki that)
if no rust, then , ID say bad hose.
we are blind here, and can not inspect your car nor test it.
nor tell you , in less than 10000 words how to be one.
in most cases the tank will have to be partially dropped to refit many parts here.
in many cases the hose can not be moved, unless the tank moves.
looking is all it takes, to determine that.
to work on old cars try buying a service manual.
it is covered in that book how to do that.
but Id be all over what leaks first. (diagnose first , then fix)
Posted on Dec 27, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Is the line plastic or steel? They make repair kits for plastic lines, if you can find them. They are hard to find. If it is a steel line, you can go to the parts store and buy a pressure fitting. Cut the line and put the pressure fitting on. If it is the end of the lines, where they hook together or hook to fuel filter, it could be bad O-rings. Need more info.
Posted on Nov 19, 2008
Lee2fixit doesn't know what he talks about on 99 Rodeos.
There is no dipstick tube - there are two access holes on the side of the transmission. The bottom one is to drain it out. The top one is to fill it back up. It is full when the fluid comes up to the bottom of the top hole.
Or you can take it to a dealer or service center to have it done.
Posted on Feb 05, 2009
well i got a salvaged ecm from a junkyard and put it in, still did'nt start. took alternator off to have it checked , it is fine. put it back in and now it starts and runs fine. check the alternator and the connections, i heard the alternator controls power after the initial ecm prime when it is turned on. i have no idea how true it is, but worth a shot. if you can find a cheap ecm for a junkyard (mine was 75 bucks) i would try that afterwords.
Posted on Mar 06, 2009
I would send the car in for a smoke test...So much easier to find the leak...
Posted on Mar 16, 2010
Testimonial: "found another definitation for a code 422. replaced rear o2,fixed"
Tips for a great answer:
Apr 10, 2014 | 1999 Isuzu Rodeo
Apr 11, 2011 | 1999 Isuzu Rodeo
Apr 11, 2011 | Isuzu Rodeo Cars & Trucks
Sep 12, 2010 | 1999 Isuzu Rodeo
May 10, 2010 | 1999 Isuzu Rodeo
Mar 24, 2010 | 2001 Isuzu Rodeo
Oct 17, 2009 | 1999 Isuzu Rodeo
Jun 02, 2009 | 1999 Isuzu Rodeo
Mar 23, 2009 | 1999 Chevrolet Cavalier
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: