Question about Cars & Trucks

Open Question

I need to know why the interior light & the passengers floor well lights stays on . Also when I lock the car the horn sounds 7 the car alarm keeps going off. Please help

Posted by on

  • kakima Dec 26, 2016

    Hi Lee Lanole, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

    What year, make, and model?

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 28 Answers

SOURCE: alarm problems

check all fuse are normal , if damage change it first other wise
you have reprograme the remote with car or change the door control switch

Posted on Jul 17, 2008

Ad
  • 393 Answers

SOURCE: car alarm goes off

is the battery the right one for the remote ie; size/voltage. check for lights inside (map,reading,etc) left on causing the bat to discharge.

Posted on Dec 03, 2008

  • 1 Answer

SOURCE: Alarm haywire, can't override anti-theft system or turn on car

The Alarm on my Mercedes ML320 sounded every night, then it started doing it more often, Showed it to the dealer he says it's the 'Tow Sensor', that needs to be repaced. $700, down the drain. I have already started hating this car, it eats $500-600, every 6 months...

Posted on Jan 27, 2009

chuck943
  • 783 Answers

SOURCE: interior lights stay on and panic alarm keeps going off

You have a bad or sticking door adjar switch. The switch is located in the latch assembley inside the door. Most of the time you can take some WD40 and spray it into the latch,put a good amount on it,then open and close the door several times.

Posted on Jan 29, 2009

  • 4 Answers

SOURCE: flat battery

Sounds like the timing unit which automatically turns off your dome lights after a few minutes is working backwards. Probably need a new unit.

Posted on Jun 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior light stays on when driving.goes off when I use key fob to lock


Interior lights will not turn off when door closed - VW Audi Forum

www.vwaudiforum.co.uk/.../36009-Interior-lights-will-not-turn-off-whe...
... locking when using key fob, only from the inside via the lock on the drivers door ...by key fob and manually turn off the interior lights but the door lights stay on.

close door light & interior lights - CarGurus

www.cargurus.com > Questions > Ford > Edge

CarGurusJul 24, 2010 - close door light & interior lights - close door light on my ford edge is lit up on the dash and the interior lights wont go off. all the doors, truck, and . ... are completly shut. what to do? help before my battery goes dead. ... charged Interior lights work Headlights are strong Key fob locks and ... Used Ford Escape".

Door Chimes, interior lights on when stopped, and power locks have ...

www.grandamgt.com > ... > Technical Q&A

Apr 28, 2011 - 13 posts - ‎5 authors
It really only happens when its totally stopped while in drive. ... Key Fob- It works, but no longer gives the horn sound to confirm its locked. ... The fact that the car doesn't honk when using the remote isn't a problem. ..... Currently my dome light stays lit when on the door position and my alarm goes off as soon ...

Help - Interior lights staying on / door locks going crazy ...

www.mazda3forums.com/...interior.../329450-help-interior-lights-stayin...
Feb 11, 2009 - It seems that my interior lights stay on while im driving. ... If you get into the car start up the car, and then close the door the lights shut off. ... the when youuse the key fob to lock the car at night the interior lights stay on as well.

Jan 27, 2016 | Cars & Trucks

Tip

How to set & cancel theft deterrent system or how to set & cancel security...


Theft deterrent system (on some models)

Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

• Any door or hood is forcibly opened.
• The batter terminal is disconnected and then reconnected
• The system control is disconnected and then reconnected.
• Abnormal impact is detected when the impact sensor function is on.

The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

Setting the system

You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

1. Turn the ignition key to "LOCK" and remove it.
2. Have all passengers get out of the vehicle
3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

Once the system is set, you cannot start the engine until you cancel the system.

The system will not be set in the following cases.

• When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
• When the hood is open; close the hood securely.

Canceling the Impact Sensor

The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

• When parked in the noisy area
• The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
• When transporting by a car carrier or ferry.

To cancel the impact sensor;

1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

The impact sensor is deactivated as long as the system remained armed.

Canceling the system

The system will be cancelled by the following two ways:

• Turn the ignition key from "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch

If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

When the system is set

Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

• Unlocking any door without using wireless control
• Any door or hood is forcibly opened.
• The battery terminal is disconnected and then reconnected.
• The system control assembly is disconnected and then reconnected
• Abnormal impact is detected when the impact sensor function is on.

Reactivating the alarm;

Once set, the system automatically resets the alarm after the alarm stops.

The alarm will activate again under the same circumstances described in "Activating the system".

Stopping the Alarm

The alarm will be stopped by the following two ways;

• Turn the ignition key from the "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch.

The system can be cancelled by these ways at the same time.

If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

Testing the system

1. Set the system
2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
3. Open the door, and an alarm will sound.
4. Stop the alarm by pushing the unlock (cancel) switch.
5. Repeat this operation for the front passenger's door.

Good luck.

on Nov 08, 2010 | Toyota Pickup Cars & Trucks

1 Answer

Horn goes off when I connected jumps leads to range rover sport 2006. I couldn't get into car as remote fobs wouldn't unlock or lock car I manage to get by using the key and doing the 151 sequence which I...


That's usually what happens when the battery has gone dead and when you are reviving it by hooking up another battery the horn goes off because it is hooked up through the car alarm. Try dissarming the alarm after you hookup the jump leads. That should work.

Mar 12, 2014 | Cars & Trucks

1 Answer

2006 Jetta has interior floor lights that stay on even after locking the car, and the alarm does not beep when locking the door. What can I do to get these lights to turn off so the battery does not die?


the "puddle lights" should go out about the same time as the interior lights,after removing the key from the ignition,if not try an alarm/immobiliser system reset as per the book.

Nov 02, 2010 | 2006 Volkswagen Jetta

1 Answer

94 grand cherokee fuse panel fuse id,,,need to know each fuse function, location in panel and amp


............1994 Jeep Grand Cherokee
......(Fuse Block - Passenger side of Dash)
.....1........5........9........13........17........21........25
..20 A...15 A...20 A....20 A....7.5 A.....15 A....30 A
.
.....2........6.......10.......14........18........22........26
..15 A...15 A...10 A....20 A.... 15 A.....15 A....30 A
.
.....3........7.......11.......15........19........23........27
..20 A...15 A...15 A.....3 A......15 A....15 A.....10 A
.
.....4........8.......12.......16........20........24........28
..15 A...15 A...15 A....20 A.....10 A....7.5 A....30 A
1)Trailer Tow Relay
2)Brake Lamps
3)Hazard Lamps
4)Security Lamp
5)Interior Lighting
6)Security Alarm Module
7)Security Alarm Relay, Security Alarm Module, Flash-to-Pass
8)Overhead Console, Keyless Entry, Radio Memory/Clock
Memory/Chime Module, Power Locks, Power Mirrors,
HEVAC and VIC
9)Rear Wiper
10)Radio
11)Cigar Lighter
12)Parking Lamps, Automatic Headlamps
13)Horn Relay
14)Power Lock Relays
15)ABS Module and Relay
16)Turn Signals
17)Heating and Air Conditioning Module
18)Airbag Module
19)Interior Mirror, Auto Headlamps, Overhead Console,
VIC/GDM Module, Heated Rear Window Relay Coil,
Illuminated Entry Relay and Chime Module
20)Heated Rear Window Switch, Overdrive Switch, Speed Control
21)Security Alarm Module, Lamp Outage Module
22)Airbag Module, Speedometer, Tachometer, Telltales and
Gauges
23)Heated Mirror Feed, Heated Rear Window Switch
24)Instrument Panel Illumination
25)Power Seats
26)Power Windows, Power Sunroof
27)Security Alarm Module and Front Wiper
28)Heated Rear Window Relay

Aug 19, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Intermitent alarm and unable to lock jag x type 03 from key fob


Hie kshep05,i'm having the same problem on my x type which i bought last week. it just started doing that yesterday and i am @ my wits end. Have you had a solution or diagnosis for your problem?

May 05, 2010 | 2003 Jaguar X-Type

2 Answers

Lights and horn stay on for a couple of minutes


Does it go off ocationally while you are using you turn signals?
Check you multifuntion switch, if it is shorting out it can send power to you horn from when your interior lights is activated. Hope this helps

Mar 05, 2010 | 2006 Dodge Ram 1500

2 Answers

Window, interior lights, car alarm and fuse keep on burning out


you have a short circuit or burned out wires somewhere, could be anywhere.
Try disconnecting the alarm, taking the bulb out of the interior lights, and putting in the fuse, if it blows again you know that the alarm or interior lights are not at fault, if it stays good replace the bulb and if it blows theres your faulty circuit, if it stays good then the windows are at fault.

Oct 09, 2009 | 2000 Volkswagen Jetta TDI

2 Answers

Help! my car is possessed


i may be wrong at this but i think it's your alarm system. headlights, doors and horn all connects to an alarm system (if your alarm system does this) i mean, some alarms, when you unlock or lock your car, the lights turn and horn blows simultaneously with the alarm. if you have an alarm system that seem to malfunction, it may also affect your doors, horn lights etc. have it checked or replaced.

well, as ive said, i may be wrong. =)

Jul 15, 2008 | 1997 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...