Question about Cars & Trucks

Open Question

When i turn on my trafficators it blinks with the taillight and brake light and when i change to high light only the rigth trafficator blinks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: My car shimmies upon braking from high speeds

Sounds like warped rotors and worn pads or a worn front end or both. Most shops will check this for free I believe. If it were something like wheel bearings, or rear end you would likely notice this at lower speeds as well with out the brakes being applied. So the direct answer to your question is "Maybe, maybe not". Gee, that was helpful was'nt it?

Posted on Sep 26, 2008

Ad
  • 1201 Answers

SOURCE: 95 e350 rv front brakes sticking

The brake calipars were seizing up, If the problem returns again, replace the calipars.

Posted on Mar 14, 2009

  • 17 Answers

SOURCE: my probe is stalling at traffic lights. the rpms wont stay high enough to keep the engine running.

Most modern cars with fuel injection, have to maintain a certain range of fuel pressure. There is a schrader valve in the fuel line. At this point fuel pressure can be checked. Pressure is always present. This can be dangerous, even at low pressure. Hope this helps lbreen

Posted on Apr 22, 2009

  • 21 Answers

SOURCE: hyuandai high idle speed when in traffic

You don't, unless it's ridiculously high, like over 1750 rmp. Most cars will idle higher in drive then they do in park. The next time you get caught at a light put it in park and let it sit, it may go higher at first but most lower below what it was idling.

Posted on Jun 17, 2009

  • 1 Answer

SOURCE: no brake lights when i push the pedal

Its the signal light switch on the lever.
THe signal switch has all connections relating to the brake lights!
solution play around with the lever and see or get someone to see the brake lights work with the brake pedal down.
My car does the same thing! when i move the lever towards activaiting the high beams the brake lights work.
just gently push on the lever to see the lights go on.
you have to replace the switch and requires removing the steering wheel without setting off the airbag.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2010 Ford Transit Connect - Brake lights not working, replaced pedal switch.


If the fuse for the brake lights is good, I would suspect a broken wire or defective turn signal/multi function switch. The main brake light circuit usually runs through the signal switch assembly. The high mount brake light is on a seperate circuit

Jan 06, 2016 | Cars & Trucks

1 Answer

The steering lamp is lit, blinking frequency faster than usual


When the handle to move the steering lamp, turn on the dashboard display lights flashing frequency faster than usual, generally due to side of the steering lamp is broken, the line resistance to change. When your vehicle is this phenomenon, must be timely inspection replacement light, in order to guarantee the traffic safety.

Dec 20, 2013 | Cars & Trucks

1 Answer

When driving the dash light dims when the brake is applied


check your alternator is giving out about 14 volts if no .check the brushes held on with two bolt behind your alternator as may be worn .or change the alternator.

Dec 07, 2013 | 2004 Honda Accord

1 Answer

Dip beam


The main beam isn't designed to "dip" to oncoming traffic. When you "dip" the beams, it's the high beam that drops out until you click it back to high again. If you have the optional automatic vehicle approach system (NOT just auto headlights) the high beams will dip automatically to oncoming traffic and then go back to high beam again after the oncoming traffic passes.

Nov 29, 2013 | Land Rover Discovery Cars & Trucks

1 Answer

I have no turn signals


The trafficator can maybe faulty.
To test this, press the hazard switch and if all the indicator lights do not blink then it confirms the trafficator can is faulty and needs to be replaced.

May 20, 2012 | 1989 Ford F 250

2 Answers

Brake lights not working... friend tested all sorts of things, used a ''needle''? ... said something under the steering wheel...my question is: how much should this cost to fix? and, until I can pay to fix...


Yes your going to get stopped. Do you think they'll look the other way. I've this be as simple as the connection at the bulb is bad and bent some metal to make the conntact.
Not sure what under the steering wheel has to do with brake lights????

Jan 05, 2010 | 2001 Chevrolet Lumina

3 Answers

1998 chevy silverado brake problem


Sound's like the ABS common problem. Chevy has a recall that say's to remove and clean the front speed sensors mateing surface of rust. I would try that before I started spending money. If you can do you own front brakes you can handle this. Good luck

Aug 03, 2009 | 1998 Chevrolet K1500

2 Answers

No brake lights on 95 Suburban


Bad or borken wire harness in the steering coloum. check power to brake switch, should have power on one side, if not check the fuse if fuse is good and you have no power then your turn signal switch or harness is bad.

Jun 13, 2009 | 1995 GMC Suburban

1 Answer

Signal light system problem


You have a bad ground somewhere .. try the rear lights first make sure each light is grounded good .. then try front ones and see if they are grounded also. Remove bulbs and replace them and make sure each is in good clean condition.. thanks Jerry holler if you have more

Jan 30, 2009 | 1997 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...