Question about 2004 Ford Ranger

1 Answer

Where would start to repair heater, blowing cool air only. 2004 ford ranger edge

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,005 Answers

Check that the cooling system is fully serviced (near full mark in coolant reservoir). With engine warmed up, feel (carefully) both heater hoses where they go into the firewall. If both are hot, there is water circulating through the heater core - possibly problem with blend door actuator. If only one hose, or neither hose is hot, you may have a blockage in the heater core. This usually means replacing the heater core, but you may be able to flush it. See this YouTube video: https://www.youtube.com/watch?v=M9SIafVsqyc

Posted on Dec 25, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 2004 Chevy Silverado Heater blows cool air

Check blend door actuator for operation

Posted on Feb 15, 2009

  • 59 Answers

SOURCE: heater

Likely it has more to do with the door that controlls the airflow. Which should be operated by vacum might check and make sure all thevacum lines are plugged in.

Does the gauge in the car show it warms up?

Posted on Feb 24, 2009

localwonder
  • 6784 Answers

SOURCE: 2004 ford ranger edge 3.0L spark plug wire diagram

The diagram you seek is below.


374d96b.jpg

Posted on Jul 26, 2009

jturcotte
  • 8578 Answers

SOURCE: 2004 f350 ford heater blows cool air but hoses are

check to see if the blend door is moving where you change the temperature setting. I think your blend door is behind the glove box. Here are instructions for removing the actuator. Take it off, plug it back in and see if the motor rotates. Also check to see if you can rotate the blend door by hand. If you can rotate it by hand, the motor is probably broken of the gears are stripped. Let me know if you have questions.

  1. Release the stops and lower the glove compartment door.
  2. Disconnect the connector.
f4b0b74.gif Fig. Blend door actuator-F-250 & 350


  1. Remove the two screws. Rotate the blend door actuator and bracket assembly. Remove the electronic blend door actuator and bracket assembly.
  2. To install, reverse the removal procedure.

Posted on Oct 17, 2010

bdmccaffery
  • 96 Answers

SOURCE: fuse diagram for 2004 ford ranger edge

http://www.ford-trucks.com/forums/256814-fuse-panel-diagram.html

Posted on Feb 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater wont blow hot air


how old is the thermostat? are any hoses cracked or sucked together. heater core may need to be flushed or replaced? good luck!

Oct 20, 2013 | 1994 Ford Ranger Supercab

1 Answer

Heater blows cool air in winter


is it a manual sliding valve or a computer regulated temp valve ? could also be the temp gauge.

Feb 10, 2013 | 2009 Ford Edge SEL

1 Answer

Heater blowes cold air in 2008 ford ranger


air trapped in cooling system. need to burp it out.

Oct 26, 2011 | 2008 Ford Ranger

3 Answers

Heat in my 98 ford ranger not working it blow out cold air from defrost only


check antifreeze level make sure its full with antifreeze and not just water if full check heater core for leaks see if it is antifreeze on the passenger side floor

Feb 05, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Aiconditioning blows hot air Ford Focus 2004


Your valve that shuts off the hot water to your heater core is not closing.Your AC is running but it is trying to cool down 200Deg. air.May be a issue with the heater/AC contol in the dash or the mixing valve stuck open.

Dec 31, 2009 | 2004 Ford Focus

2 Answers

Heater blows cold air. I have replaced thermostat,


Not an expert by any means, but i know my ranger.. I had a small leak at the top of my radiator that still cooled the engine but didnt have enough pressure to get to the heater. The heater hoses travel up over the engine and just were not gettin anything to my heater core. That or make sure the heater control valve is operating.

Oct 26, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Heater in truck blows either cold air or no air.


It sounds like you have air trapped in the cooling system. Try filling the radiator and coolant reservoir cold. Then leave the radiator cap loose and run engine at 1500 rpm until it warms up and the thermostat opens. Make sure heater is on full warm setting.

Oct 02, 2009 | 1991 Ford Ranger Supercab

2 Answers

Engine won't warm up. heater won't blow warm air.


maybe it is missing its thermostat.... this can keep the air in your heater cool in winter

Aug 17, 2009 | 1999 Ford Ranger SuperCab

1 Answer

2002 Ford Ranger Edge Regular cab


check for a problem neutral switch and wires
may find that switch is loose and grounding out the wire connections or plug

May 04, 2017 | 2002 Ford Ranger Regular Cab

1 Answer

2003 Ford Ranger Edge Heater problems


LOW COOLANT TOP OFF With cap off after Idling fro 10-15 mins with haet temp selector switch on HOT

Jan 13, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
2004 Ford Ranger Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...