Question about 2007 Honda Fit

Open Question

O7 HONDA FIT AUTO TRANS NOT GOING INTO PARK AND OF COUSE THE KEY COULD NOT REMOVE. AND I DONT THING SHIFTER OR BRAKE SWITCH. IT SEEMS LIKE INSIDE THE TRANS iS THERE SOLENOID IN TRANS, IF YOU HAD THIS

KIND OF PROBLEM HOW DID YOUM GET IT FIX WHAT FIXED IT??

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: key stuck in ignition

There a several recalls that deal with this problem, it seems that due to a defective part in the ignition interlock system at times the key not be removed from the ignition, it appears the issue is corrected by installing a new lock cylinder, to read the full text of recalls on this issue go to link listed below.



http://www.carcomplaints.com/Honda/Accord/2000/investigations.shtmle

Posted on Aug 22, 2008

  • 4 Answers

SOURCE: 1995 Honda Accord Stuck in Park

change the gear box and expensive for u haha cause its auto mines manul

Posted on Oct 27, 2008

  • 14036 Answers

SOURCE: Can't remove key from ignition for '00 honda accord @ park positi

push key in turn on and off push key in work switch off and on .if dont release you probably going to have to take out the ignition switch. make sure your car is all the way in park.

Posted on Apr 07, 2009

  • 100 Answers

SOURCE: Gear shifter sticking (auto) from Park to reverse and vice versa.

you need to have the shifting cable lubricated or replaced.

Posted on Apr 26, 2009

  • 54 Answers

SOURCE: 98 honda civic auto transmission shifter

I'm thinking this is an interior problem. Dirt ETC.. can build up around the shifter, you can pop the panel below the shifter up with a screwdriver. Clean this panel up and lube up the linkage below and you should be good to go.
















Posted on May 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 honda fit auto trnas not going into park. I ALREADY DISCONNECT THE SHIFT CABLE OUT OF SHIFTER AND SHIFT LEVER SEEMS TO MOVE FREELY, BUT THE CABLE SEEMS TO STUCK, HOOKED IT BACK ON AND SHIFTED BACK


Shift interlock ! an key lock It's a safety system that won't allow you to shift out of park unless you foot is pushing on the brake pedal , plus it won't allow you to put it into park or turn off the ignition if vehicle is moving . It's electical , brake switch , lock solenoid , may also have a body module of some kind for control . It may have DTC'S - diagnostic trouble codes stored . The best way to diagnose this would be to buy a repair manual so you read up on how it works .What I said above is just a general explanation of the system . You should also look at a wiring diagram .

Dec 26, 2016 | 2007 Honda Fit

1 Answer

2007 500. Shifter broke inside is a plastic. Plunger that has stuck and wont engage park or let my keys come out how do i bypass this


You disconnect it down at the transmission, and move the linkage manually. Doing so manually will engage the "park" position on the trans itself, but the wiring to release the key is connected directly to that shifter. The only way to "bypass" would be (_after_ disconnecting the linkage to the trans), disassemble the entire shifter from the console. You will find a switch. You simply need to engage the switch (or disengage it, depending on what position "park" would put the switch into)... Then you can remove the key. Seems to me it's easier to remove the car battery and simply use spare keys to lock the doors, until you can obtain a replacement shifter. You can even "block" the tires to prevent motion if you don't want to mess with the trans linkage until after you obtain a replacement shifter. (If I was there I'd get that to shift. I've done it before. I just can't explain how to do it. It's a pain-in-the-rear-jury-rig process, but it can be done).

Oct 15, 2015 | Ford Cars & Trucks

3 Answers

Where is the fuse for the gear shifter on a 1997 Honda Accord Station Wagon EX


First, what is exactly happening? as there is no fuse for Gear shifter.

Is the car not going out of park? If so, then check the Brake switch. Brake has to be depressed which operates the brake switch sending signal to the gear shifter to unlock so it can be shifted. If Brake switch is okay then only a mechanical obstruction is preventing the shifter operation. For this you will have to take of the cover on the gear shifter to see what is fouling.

Jan 06, 2015 | 1997 Honda Accord

2 Answers

2001 ford mustang stuck in park


Un do it at the trans. to check if it is in the linkage or trans.

Aug 26, 2014 | 2001 Ford Mustang

1 Answer

Will not start


Temporary fix : Remove trim ring around shifter from console
You will find a slot in the front corner that was covered by the
trim ring. Push your ign. key down in the slot at the same time
move the shifter to " N " position and it should start. May have
to wiggle shifter a little with key in start position. You will still
need to find and fix the problem but will be able to drive until
resolved.

Mar 04, 2013 | 1998 Honda Accord

1 Answer

2008 honda fit sport won't shift into park


I will share this kind of symptom with you because I have 2007 fit and its acting up the same way, it will not go into park and I shift back and forth between drives and revers then eventually it went into park. I also took the center console out and look at the shifter lever and disconnect the shift cable out of lever and it seems the shifter move freely therefore I don't think its interlock switch, I tried to call dealer but today its closed. I also have 2008 and its do the same thing I think they might have RECALL for this concern so please if you get any result let me know thankyou very much.

Nov 15, 2012 | 2008 Honda Fit

4 Answers

Auto trans stuck in park and ignition key will not disengage. Forced trans shifter out of park( so I could at least limp home),but it will not re engage and the ignition switch will not release key. Where...


I'm sorry to tell you this but there is no solenoids for park or ignition.
the only solenoid that is stopping you from getting it out of park or to any gear was the inter lock solenoid that works from your brake switch.thats why you have to push on the brake to get out of park.if your shifter is on the floor,you can remove the solenoid and not have to use it,so i'm guessing the ignition switch did not power the switch to move the solenoid and thats why it wouldn't come out of park,your ignition switch "might" come back to you when you disable the interlock and the shifter can go back in fully.good luck

Jan 02, 2010 | 2003 Jeep Wrangler

1 Answer

1999 accord wont shift out of park and no break lights.


u have a problem with ur break light switch,,, its at the brake pedal and is threaded into the brake pedal bracket, if u have a new one and are going to replace it, disconnect the connector, loosen the 14mm nut and remove the switch by turning it counterclockwise...install ther new switch by turning it clockwise and tightening the 14mm nut then reconnect the connector...be sure to adjust the switch or else the brake lights will stay on at all times...draining ur battery and possibly burning out ur bulbs...this also releases ur trans from park to put into gears

Apr 11, 2009 | 1999 Honda Accord

1 Answer

Automatic transmission won't reverse or goes into drive


If I understand your description and you can't get automatic trans shifter out of park:
ignition switch has a saftey feature to prevent you from shifting out of park unless key is turned on, I suspect your cable is broken, damaged or just not attached at the ignition switch end.  It's attached via cable that goes from ignition switch to shifter console.    
So normally you need key on and foot on brake to get out of park, there is a mechanism in shift console to prevent going into drive if conditions are not met, I think your problems lie here.

Nov 02, 2008 | 1992 Honda Accord

Not finding what you are looking for?
2007 Honda Fit Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...