Question about Honda Cars & Trucks

Open Question

Honda aviator rear light tail lamp and breaker lamps are not working while blinkers are ok, what may be the problem

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 16 Answers

SOURCE: ''96 Silverado no tail lights.

if that doesn't help, you might want to check the bulbs. the damage might have shorted which burned out the bulbs. but you do have one wire that runs to the rear and splits off to the tail lights. the wire should run back to the head light switch via a fuse. the headlights have its own relay. but i hope it is just a fuse.

Posted on Dec 11, 2008

Ad

SOURCE: Tail lights don't work on 1998 Chevy Silverado.

check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.

Posted on Feb 17, 2009

  • 100 Answers

SOURCE: 1997 GMC Sierra p/u. Brake light & blinker out. Lamp & fuse ok.

you probably got the wrong bulb
those are usualy a different number higher wattage, they look exactly like an 1127 but are a 2027 or even a 3027 check the bulb base it has the number printed on it

Posted on Aug 30, 2009

  • 112 Answers

SOURCE: NO LEFT SIDE TAIL ,STOP OR BLINKER REAR LEFTLIGHT

did you try to replace the bulb in the back normally when it blinks fast like that its just the bulb and its doulbe film thats why the brake and blinker dont work

Posted on Dec 19, 2009

SOURCE: WHERE IS HONDA CRV TAIL LAMP FUSE

hi,
i have provided the picture showing the location of tail lamp fuse for Honda. I have marked it too for your reference. Please rate my solution as helpful.Have a nice day!7c6a615.jpg

Posted on Mar 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My rear running lights dont work my brake lights work my blinkers work my emergency flashers work I just don't have running lights in the back


Begin with the basics.....Running lamps=Ft park,side marker,tail & dash back lamps.....Are all these lamps inop ??

Jun 29, 2015 | Cars & Trucks

1 Answer

I have a jeep liberty 2005 2 wheel drive my passenger side driving light will not come on. Also instrument panel lights will not come on either.


first off ,you did electric work and skipped step 1
pull battery neg lug first.
so you blew the fuses.
what IP lights. all warning lamps.
or just the park lamps in the cluster.
part is called Illumination in said cluster.

where is these other lights, what is a driving light, (park, head,turn, what? brakes?)
tell all lights that work & not , inside and outside car.
tell what knob you turn. can be like 10x better clue...?????
burned sockets are shorted lamps, the brass base lamps love to short inside, (china made x10) get new ones from top maker....

ok, so after replacing the TL assy.
what dont work now, report all lamps.
if it's only outside lamps failing, say so..
i guess you dont know that parking lamps go to like 20+ places, inside and outside car. so. parking lamps are special if acting up
then brake lamps
then blinkers (turn signals)
then reverse.

if the parks (aka, incorrectly TAIL) are bad, then we need to know that. using the correct word.
parks are on all 4 counters, and side lights and inside car.
that is why tail lamp , is a bad name. but fuses are marked as tail on many cars.

also when working on car external lighting
make sure no trailer towing hacks are found.
look for non OEM hack jobs, at the rear corners. Uhual hacks.
or past collision damage to wiring not repaired properly.

how is that>?

Jun 21, 2015 | 2005 Jeep Liberty Sport

1 Answer

Fix tail light the stays on


tail, so which lamp?
just rear of car or front and rear park lamps on, heck lots more....
there are reverse (white)
or blinkers dead? ? if no then they are not stuck.
or brake lamps on? step on brake, do brakes come on , no then most be parking lamps. on, so check all lamps in and out of car
are anyother stuck on , like cluster illum. lights> (they are park too)

that be first ,

Feb 16, 2015 | 2004 Jeep Liberty

1 Answer

No tail lights on my 2008 ford escape. driver rear blinker wasn't working. replaced bulb, but when i turn on the blinker both blinkers are blinking...front and back...


Not sure I follow your story.
The front and rear turn signal should blink on one side. If the tail lamps are not working, it could be a fuse or a problem with the wiring. And the tail lamps are on the same circuit as the front parking lamps.

Feb 26, 2014 | 2008 Ford Escape

1 Answer

Tail lights, instrument panel lights, and license plate lights not working. Fuse blows immediately when changed.


that line on that fuse is shorted, the fuse saved the fire.
we use an ampclamp DC ammeter to find the wire that is shorted
and the actual point of short.

the park-tail circuit (tail fuse, right) is the most complex of all.
20 lamps inside car, and many out side, it is the hardest to find of all shorts. but not with the tool
first check for damage behind all park lamps
i bet the fuse blows in park (1st click) not head lights. right?
side lamps the 4 front rear park lamps, some call it tail its not really tail now, was in 1920 ,not now. park is everywhere.
but the fuses can be marked tails, for fun .
imagine, calling the 2 front lamps tails. and are on .(my on going joke)
sidelamps,
the inside lamps are many too.
all dimmable lamps. so turn the dimmer down to zero and see if fuse blows now, NO?, bingo.

the best way to fix this is , visual inspections for collision damage or wire hacks in the cab.
then the fuse is pulled and circuit breaker inserted 15amp
(they sell em)
then we connent the ammeter to the wire (output of fues)
i push the switch and amps goes to infinity and the CB trips
if follow the cables, and find what line is shorted.

i missed one problem
on the rear or front 4 corners of the car may be twist lock blubs.
like 1157 or? these love to short. push in lamps never short.well not the lamp actual.
in not sure what lamps the 06 uses, but replace the brass based lamps. (in park tail ckt)


Jan 02, 2014 | 2006 Toyota Matrix XR

1 Answer

None of the blinkers work on my 1996 dodge stratus, all bulbs are good as the park lights and flashers work. I have three dead ports in fusebox under hood.


Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.

Sep 14, 2012 | 1996 Dodge Stratus

1 Answer

2001 jaguar s type - Right tail lamp failure message.... I replaced bulbs and fuse and tail lights still don't work but the dual element right break light does illuminate when I press the break also right...


There is a harness that you unplugged for the rear tail lamp. Make sure it is fully pressed and locked. This is always the cause on jags for tail lamp failure.

Dec 14, 2010 | 2001 Jaguar S-Type

1 Answer

2001 Olds Silouhette - The blinker on the dash blinks quickly


NO PROBLEM TURN ON THE RIGHT BLINKER THEN WALK AROUND THE CAR MAKE SURE FRONT AND REAR BULBS ARE FLASHING... IF YOU HAVE A BULB OUT YOU WILL NOT OFFER ENOUGH OF A LOAD TO THE FLASHER... WILL CAUSE IT TO FLASH FAST... IF OK THEN MAKE SURE THE PROPER BULB NUMBER ON BULBS AND MAKE SURE CORRECT BULBS USED IN VEHICLE.... IF OK CHANGE FLASHER

Aug 31, 2009 | 2001 Oldsmobile Silhouette

1 Answer

I would like to know how to remove my 03 lincoln aviator tail lamp as I need to replace it. Thank you..


here's mountaineer, it should be similar

SECTION 417-01: Exterior Lighting 2002 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Rear Lamp Assembly —Mountaineer Removal and Installation
  1. Raise the liftgate and remove the rear lamp assembly screws.
  1. Remove the rear lamp assembly.
    • Disconnect the electrical connectors.
  1. To install, reverse the removal procedure.
    • If necessary, install new tail lamp bulbs.
8966cfe.gif

Aug 01, 2009 | 2003 Lincoln Aviator

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...