Question about 1999 Honda Passport
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to drop the exhaust pipe and remove the wheel. I got his info from Wiki Answers hope it helps you.Read below.
. Disconnect the battery first. After that you may want to remove the driver's side front wheel. This gave us access to the starter for removal of the battery cable and the spade terminal which are on top of the starter while it is mounted. We then removed the two bolts that hold the starter in place. All of that took about 10 minutes to complete. On my passport the battery cable came off with a 12mm, the spade terminal is plug and play and all you have to do is push down on the tab on top and pull the terminal apart. The bolts for the starter are 14mm on my car. You need extensions to get at them though. After that is when all of the work began. We then tried every way possible to get it out of the compartment without taking anything else apart. No luck. So we removed the heat shields around the exhaust manifold and exhaust. Still not enough room. So finally we took the 3 bolts out of the flange that connects the exhaust manifold to the exhaust pipe. We had to use reverse torque bolt sockets for this. The one we used was the NAPA E-14. There are nuts on the bolts but removing only those won't do the trick. They are 17mm in case you are wondering. We then had to remove the bracket just aft (rearward) of the catalytic converter to get enough play in the exhaust pipe. Once you do this, the starter slides right out of the space moving down and aft. The new starter goes right in no problems once you are to this point. The only casualty to the whole process was one of the bolts from that flange on the exhaust manifold lost it's threads in the process. We were lucky that none of mine sheared off which is apparently a large concern and somewhat of a probability. Good luck
Posted on Jan 22, 2009
both i have cleaned some and it works and sometimes it doesnt get the gasket they will sell you just the gasket now you have to have some really small brushes there are moving parts in there that have to be cleaned you can just barely see them get you some brake cleaner i use q-tips after i do the wire brush thing good luck and let me know if you need any more help
Posted on Jun 26, 2009
Tips for a great answer:
Jan 10, 2015 | 1999 Honda Passport
Oct 15, 2013 | 1999 Honda Passport
Sep 04, 2012 | 1999 Honda Passport
Feb 15, 2011 | 1999 Honda Passport
Welcome to FixYa.com
Thank you for using FixYa.com, Regards, Lee Davidian -=-------------Check Trans hot not cold-------------
Sep 16, 2010 | 1999 Honda Passport
Jan 22, 2009 | 1999 Honda Passport
Nov 12, 2008 | 1999 Honda Passport
Jul 10, 2008 | 1999 Honda Passport
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: