Question about GMC K1500

1 Answer

1998 gmc k1500 wipers don't work on delay or low only hi

Posted by on

  • Michael Knorr
    Michael Knorr Dec 25, 2016

    It might be your electronic board underneath the cover of your wiper motor, sometimes you can cut out a piece of cardboard and place it between the two Because your contacts could be worn out or replace your wiper motor module, merry Christmas

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 1,381 Answers

Maybe wiper arm mechanism on way out

Posted on Dec 25, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why my windshield wiper only works on high and don't work on delay?


There is a wiper delay module under the dash that has failed. Windshield Wiper Switch MOTORCRAFT SW-5665

Sep 17, 2014 | Cars & Trucks

2 Answers

What is the relay location in the relay box


The problem would be in the stalk controller. The wiper Relay is what provides power to the motor for all settings, the delayed wipers, low speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working.

Jul 27, 2014 | 1998 Ford Ranger

1 Answer

Wipers make grinding noise when I turn on and they don't work on my 1998 Gmc Yukon


Dear,
your car wipers rubber have worned out

please get them repalced

thanx

May 28, 2011 | 1998 GMC Yukon

1 Answer

Windshield wipers in my 1989 gmc sierra k1500 only work on high no low or delays


If you raise your hood and look at your wiper motor on the fire wall there is ablack plastic cover over the motor remove that and you will see a chip board that is replacable its usually around $20 or so, which is cheap way to find out if your wiper switch or multifunction switch is bad, since they arwe far more expensive! if the board does not solve your problem then suspect multifunction switch!

Mar 29, 2010 | 1989 GMC Sierra

1 Answer

Intermittent wipers don?t work properly, 98 dodge van


Mine was the Body Control Module (BCM). Switched it out (needs to be programmed) and everything was fine.

Sep 14, 2017 | 1998 Dodge Grand Caravan

1 Answer

My wipers are not working why?


delay serkit board crack replace very common

Feb 23, 2010 | 1993 GMC Sierra K1500

1 Answer

98 Cadillac Eldorado ETC, Wiper delay and washer quit working. Wipers work on low & high.


you will need a new washer pump that is located in the washer reservoir and a new wiper motor cover which has the circuitry for the delay wipers. All you do is change them out with new parts and it will operate like new again

Jan 24, 2010 | 1998 Cadillac Eldorado

1 Answer

1985 gmc k1500 wipers only move at 1 slow spped, interminttent doesnt work at all. How fast is fast and why is fast not working?


Slow is the same speed as 'mist'. Mist is when you twist the control arm backwards to induce a single swipe. If you hold it, you will run the wipers in low speed. Fast is faster than that. Probably by 30% or more.

Turn the wipers on high speed. Wiggle the connector at the wiper motor. If the wipers run sporadically as you wiggle the connector, you either have a bad connector or a bad circuit board on the wiper motor.


Jan 15, 2010 | 1985 GMC K1500

2 Answers

Windshield wiper control will only work on high speed no delay or low speed.


check wiper relay or possible the stalk itself could have broken contacts

Dec 23, 2009 | 1998 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...