Question about Dodge Neon

Open Question

How to change the wiper motor on a 2004 dodge neon 2.0 liter sxt

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 147 Answers

SOURCE: I want to drain my radiator and put in new anti-freeze fluid.

there is a drain plug on the bottom it should be on the right side maybe left but it screws out to the left to drain it

Posted on Nov 18, 2008

Ad
litoshop
  • 298 Answers

SOURCE: 2005 dodge neon sxt how many motor mounts

Hi I'm litoshop on your vehicle you have 5 mounts front left side, front right side, lower strut rear of engine,upper strut right side and transaxle rear left side good luck if this information has been helpful please let use know thank you

Posted on Aug 17, 2009

devdeep dhar
  • 375 Answers

SOURCE: CODES P0300 P0303

These codes are codes regarding failure. The code P0300 means repeated Engine Misfiring. The code P0303 means Repeated Misfiring of Cylinder Number 3. Kindly contact a technician to get both checked. Their Heads must have been misplaced or broken due to misfiring.
Thank you sir, Have a nice day.

Posted on Sep 26, 2009

  • 571 Answers

SOURCE: my 2004 dodge neon sxt is giving me a p0340 code

A code P0340 could mean one or more of the following has happened:

  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed

With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:

  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

Hope this is for any assistance.

Posted on Dec 13, 2009

  • 373 Answers

SOURCE: where is the camshaft sensor on a 2004 dodge neon

disconnect the negative battery cable. the cmp sensor is located on the left end of the cylinder head. move thebrake booster hose and electrical wires out of the way to access the cmp sensor. disconnect the sensor plug by pushing the locking tab back toward the firewall. remove the 4 bolts from sensor and lift out sensor. remove the trox bolt which holds the target magnet to camshaft. when installing target magnet be sure to line up holes to dowels on end of camshaft. torque torx bolt to 30 in-lbs. be sure to install new o-ring on sensor and torque bolts to 80 in-lbs. (hallclifford)

Posted on Apr 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car momentarally shutters at all speeds and gears more and more frequently after it is warmed up. You can feel it slightly at idle.


2003 neon shaking after changing both right motor mounts ...

www.topix.com > Dodge Neon
Mar 10, 2012 - ... News Offbeat Stars! Topix > Dodge Neon > 2003 neon shaking after changing both. .... Google dodge neon engine alignment, and some sites will fill you in better. Reply ยป. Report Abuse .... 95 neon oil leak? (Oct '08), Oct 22 ... dodge neon engine vibration
Nov 10, 2012
2004 Dodge Neon SXT Problems
Jan 8, 2011
02 neon vibration under acceleration
Jul 21, 2007
97 Neon Idle rough
Jan 18, 2007
More results from www.topix.com

Oct 29, 2015 | 1995 Dodge Neon

1 Answer

2004 Dodge Neon SXT, added new battery need code to reset car


if you are the original owner, look in your paperwork. if you cant get to the original owner or they dont have the info, you can go to your dealer, and they can reset it for you. and charge you

or you can just start entering codes till it works, which will take you weeks or more.

good luck

Mar 21, 2010 | 2004 Dodge Neon

1 Answer

2004 dodge neon sxt 2.0l do i need to do a


there is no such thing you need to time the engine correctly

Nov 21, 2009 | 2004 Dodge Neon

1 Answer

My wipers just came on and trans wouldnt shift i shut off and took batt. off and put back in turned car on wipers came back on and car shifted in gear but wouldnt go i have a 2002 dodge neon sxt


HAVE YOU CHECKED GROUND STRAPS ON RAD SUPPORT..HAVE SEEN BOLTS ON THESE GROUNDS BREAK OFF AND CAUSE ALL KINDS OF ELECTRICAL ISSUES..2-3 BLACK WIRES GOING TO A BOLT ON EACH SIDE OF RAD SUPPORT

Jul 17, 2009 | 2002 Dodge Neon

2 Answers

Differnece Between 2004 sxt neon and srt4?


the SRT4 and SXT parts are not interchangeable, as they are 2 different drivetrains

Mar 23, 2009 | 2004 Dodge SRT-4

1 Answer

Windshield wipers start when a/c/ on


you have a short in the switches take it to a dealer and have it repaired

Aug 04, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...