Question about Cars & Trucks

Open Question

Info on masport 635 wheel front and rear wheel types plus fitting

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

creg_912
  • 196 Answers

SOURCE: Looking for info to replace

the brakes are pretty much just like any car,remove the fluid reservoir cap,then the tires,then disconnect the neg term on the battery,remove the calibers,then compress with a c clamp,then install,..the bearing are removed by releasing the hub assembly by removing the axle bolts and pin, i will send pictures Monday if need be...once the bearings are replaced make sure the hub isnt overtightened...and put the reservoir cap back on the brake unit...

Posted on Sep 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace front wheel hub


old school vehicles
after brakes are off
take grease cap off 'pull out split pin
take off the nut cage
undo the nut
taper bearing will drop away
take hub off

if a modern vehicle ..not so DIY ish

need more info
what sort of stub axle// front strut or wish bone type
front wheel drive with a CV joint or or rear wheel drive

May 27, 2016 | Cars & Trucks

1 Answer

How to fit front wheel bearings Which brand to use for quality


If the car is front wheel drive a puller is required to dismantle the hub a rather involved job better left to a mechanic .If rear wheel drive do the following. ( Applies to front wheel drive also.) Chock rear wheels,loosen front wheel nuts, jack up car, fit safety stands,remove wheel , remove grease cap from axle. remove split pin or locking nut on axle ,Remove hub, with a punch drive out the grease seal ,the tapered cone bearings can now be removed, the 2 bearing cups still in the housing will have to be pressed out ,all old grease has to be cleaned out. the new cones must be repacked with high temp bearing grease . tap in the seal with the lip facing inwards , slide on the hub fit the outer cone to the axle , the spacer and nut goes on next, tighten the nut to seat the bearings , spin the hub make sure its free to spin, back off the nut one eighth of a turn fit a new split pin or lock tab. fit grease cap and road wheel.

Jul 27, 2014 | Cars & Trucks

2 Answers

I have a Hyundai, Genesis, 2010 coupe, 4 cyl. I have been having problems to establish what type and size of winter tire I should put on this vehicle for best performance both in snow and ice. I have...


HERE IS THE REAL QUESTION YOU SHOULD ASK OF THE DEALERS WHO ARE OFFERING 17" OR 18" TYRES FOR A TYRE SIZE THAT DOES NOT FIT YOUR EXISTING WHEELS......HAVE YOU GOT 17" OR 18"WHEELS???......225/45 ARE GOOD.

Nov 02, 2010 | Hyundai Genesis Coupe Cars & Trucks

2 Answers

Will 93 Grand Am wheels fit 93 Buick?


what model buick? if it is a front-wheel drive buick, yes it will fit.
If it is a rear-drive buick, then no t=it will not fir.

Aug 09, 2010 | 1993 Buick Century

1 Answer

2003 X-Type: 2003 jaguar x type - what is correct tire pressure...


For Normal driving Jaguar approved tyres:

2.0L 16" Wheel front 35lbf rear 32lbf
17" Wheel front 36lbf rear 34lbf
2.5L 16" Wheel front 38lbf rear 35lbf
17" Wheel front 38lbf rear 35lbf
3.0L 16" Wheel front 38lbf rear 35lbf
17" Wheel front 38lbf rear 35lbf

May 18, 2010 | 2003 Jaguar X-Type

1 Answer

Want to put 20" rims on a stock front wheel drive toyota corolla


unfortunately there is not unless u extend the actual strut only way i can think of is to get adjustable struts they got a smaller bottom plate plus u can adjust em lol

Feb 28, 2010 | 2008 Toyota Camry

4 Answers

Is a '94 Buick Regal GS front or rear-wheel drive?


Better still find a peugeot 307 or a ford focus all with manual transmission,and a high fuel economy so the rag heads can drink crude and live in the desert and ride camels

Oct 25, 2009 | 1994 Buick Regal Gran Sport

1 Answer

MY REAR HUB BEARING ARE BAD AS PER TIRES PLUS,


Remove Both Wheel and Drum Look for 3 or 4 Torx type Bolts at front or back of Backing Plate , Remove theese Bolts to Remove the HUB, Reverse To Install.
P.S. It may takje A Hammer to Get Hub off After Bolts.

Jul 20, 2009 | Pontiac Grand Am Cars & Trucks

1 Answer

Rear brake ceasing


cylinder is stuck in caliper strip and renew the seal and clean out the groove in the piston where the seal sits

Oct 31, 2008 | 1986 Volkswagen Wagon Camper

1 Answer

Ford explorer


Can you supply a little more info? Need engine size,4x4 or 4x2,front or rear wheel bearings?

Aug 07, 2008 | 2002 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...