Question about Cars & Trucks

Open Question

Amt gear box on COLT CZ2 only shows N and all the other shows O;no gear engagement

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 347 Answers

SOURCE: REPLACE HEATER DIAL BULB ON 06 CZ2 COLT

there are screws at the side of the console. they are covered with round plastic plugs

Posted on Aug 29, 2009

  • 432 Answers

SOURCE: what type of oil for Mitsubishi Colt gear box

First drain completely out whatever is in it. All the gear boxes and rear ends use 90w gear oil. Buy a name brand.Some of the really cheap stuff is recycled used oil.
I hope this helps you.

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Isuzu 6spd amt gear box plays up changing 2nd to 3rd but not all the time


check engine and gear box mounts and suspension mounts

Oct 20, 2016 | Isuzu Cars & Trucks

1 Answer

Mitsubishi Colt CZ2. Fault code C1278 (valve relay stuck off). where is relay located?


Have you looked in the owner's manual for the location? It must be in the underhood fuse and relay center.

Oct 09, 2014 | 2006 Mitsubishi Colt

1 Answer

Where online can I find a1983 Dodge Colt 1.4 vacuum hose diagram?


Go online, put "Dodge Colt vacuum diagram" in the images search box and there are all sorts of pictures on show.

Aug 15, 2014 | 1983 Dodge Colt

2 Answers

How do i replace spedometer cable ?


undo the cable fitting at the gear box and pull out the inner cable . push the new cable up into the outer case and give it a bit of a turn to engage it in the speedo head then reattach to the gear box.

Jun 15, 2014 | 2002 Mitsubishi Colt

1 Answer

My 2008 colt automatic has intermittent problem not going into reverse gear what is it ?


Keeping brake pedal down, move gear lever into drive, back to neutral and into reverse, give it a couple of seconds between movements. Last resort is to switch engine off and restart.

Jan 25, 2013 | 2006 Mitsubishi Colt

2 Answers

My Mitsubishi colt CZ1 (07 plate) has problem with cental locking. I can manually central lock but with the remote it locks/unlocks all the doors except the driver's door. Please help. Thanks


Central locking works by way of little electric motors that engages and disengages the door lock. The drivers door has an additional set of contacts in the actuator which signal the controller when it changes position. The controller activates the servo motors when a signal is received from the receiver or from the drivers door servo motor. So in your case I suspect the motor part of the drivers door actuator is done for.
To replace you will have to remove the inner driver's door panel to get at the actuator. The actuator itself cannot be repaired and needs to be replaced as a unit.

Apr 29, 2011 | 2006 Mitsubishi Colt

1 Answer

What type of oil for Mitsubishi Colt gear box


First drain completely out whatever is in it. All the gear boxes and rear ends use 90w gear oil. Buy a name brand.Some of the really cheap stuff is recycled used oil.
I hope this helps you.

Sep 11, 2009 | Mitsubishi Colt Cars & Trucks

1 Answer

REPLACE HEATER DIAL BULB ON 06 CZ2 COLT


there are screws at the side of the console. they are covered with round plastic plugs

Aug 29, 2009 | Mitsubishi Colt Cars & Trucks

1 Answer

Mitsibishi colt 97 stuck in 1st gear


Your link broke off. What might have happened is the car got stuck in 1st, and when you shifted to second, the link broke. Not too clued up on your car, but you probably need to drop the gearbox. On some cars you can take out the shifter without having to drop the box and still see if the link is broken. Good luck

Mar 18, 2009 | 2006 Mitsubishi Colt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...