Question about 2005 Ford Falcon

1 Answer

Lets start again I have a 2005 falcon wagon I want to trailer plug cannot buy the plug in harness the diagram does not match the colours seems duplicate wires auto elec are 120 mile away H E L P

I have tried matching but colour pattern dont match the colours in the loom to the diagram i have do not have tester and cannot buy the plug in as out of service time and delivery is from over east maybe 14 + days and no guarantee or returns so i need help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 946 Answers

You need a tester so you can do a test,like when you hold brake down,do you get 12 volts on both brake bulb wires?
Get a tester and learn to use it is all I can say,or take it to someone good on electrical. don-ohio

Posted on Dec 24, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram for trailer 2005 falcon wagon from car to trailer plug


Depends on plug type and number of Pins used.
Is it 5 pin or a 7 pin round plug or a rectangle plug ?

http://www.narva.com.au/products/browse/wiring-diagrams

Dec 24, 2016 | 2005 Ford Falcon

1 Answer

I need to know how to wire a trailer plug into a falcon 2005 wagon


type question into google and click images there's loads diagrams on there you may be lucky.
I apoligise

Dec 24, 2016 | Cars & Trucks

1 Answer

How do i get answers on here i cant see anyone answering


well you wait until someone answers it .many vehicles have ready made connectors that just need to unplug the harness under the car /truck and put the additional one in place . check with an auto parts store and see if they have such an animal .

Dec 24, 2016 | Cars & Trucks

1 Answer

I need to find the correct wires to join from the loom to the trailer the diagram i have does not match the colours for instance there is no yellow how do i match the right ones up to the trailer


Use a voltmeter and see which wires in the loom show power when (1) tail lights are on, (2) brake lights are on, (3) each turn signal is on, and (4) which shows continuity with vehicle ground/earth. Match these up with the appropriate wires in the trailer harness.
If your brake lights and turn signals are the same bulb on the towing vehicle, you're all set. If they are different bulbs, you'll need an adapter to get both brake lights and turn signals to work on the trailer.

Dec 24, 2016 | Cars & Trucks

1 Answer

Wiring a trailer into a 2005 falcon wagon


http://www.narva.com.au/products/browse/wiring-diagrams

Dec 24, 2016 | 2005 Ford Falcon

1 Answer

2005 TOYOTA COROLLA WANT TO WIRE UP THE SEVEN PIN TRAILER PLUG TO MY TOYOTA 2.0 D4D LITRE COROLLA


the secret here is to buy a trailer harness for the vehicle ( available from most tow bar supply and fitting shops )
it is a set that just plugs into the existing harness at the rear light assembly ( piggy back arrangement)
from there you wire the male and female plugs as per the color code that is on the paper that comes with the units
saves cutting into the car harness and causing real electrical problems

Jul 03, 2016 | Toyota Cars & Trucks

1 Answer

2014 triton mn. How can I connect 7-pin trailer socket into existing wiring harness?


the simplest way to do this is to go to a tow bar installer shop and buy the harness ( around $25.00 aud)
it is a simple action of pulling a harness plug apart and inserting a piggy back plug in the connection
the wires for the trailer are properly installed and all you have to do is wire the plug connection according to the wiring diagram that came with the plug

Feb 10, 2016 | Cars & Trucks

3 Answers

Cold start problem: 2005 BA Falcon wagon


next time it wont start, pour hot water over ecu, if it starts replace ecu, you will need a scanner to reset as it will go into theft mode when you fit new ecu, beware that this is a common fault and you can buy 2nd hand faulty computers.

Aug 30, 2009 | 2005 Ford Futura

2 Answers

Trailer harness - Red wire has no power


Hi: under the hood in the power distribution box there is a 40 Amp fuse that has to be installed to power up the trailer package. When standing looking from the front left fender it should be at the front right corner, refer to the power distribution diagram on the cover. As well under the box by the spare tire is a plug in type module mounted on the frame. There should be 2 wire harnesses located there, make sure the correct plug in is connected. Hope this helps... please rate suggestion .... ty

Apr 28, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

Not finding what you are looking for?
2005 Ford Falcon Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...