Question about Hyundai Getz

Open Question

What is the torque head bolt settings on a 1.6gl hayndai getz

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

Ad
  • 1 Answer

SOURCE: Angle Torque settings head bolts

Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Posted on Mar 17, 2009

  • 7353 Answers

SOURCE: head bolts torque settings for dogde neon 2002

assuming this is the "C" engine 8th digit on VIN plate. Use new bolts. torque first step to 25lbs, 2nd 50lbs, then 3rd 50lbs, then 1/4 turn.

Posted on Sep 23, 2009

stevenhurc
  • 450 Answers

SOURCE: torque settings for a holden rodeo 3.5 ra. Head

stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
front
5 2 4 8

Posted on Dec 05, 2009

ebjebs
  • 197 Answers

SOURCE: head bolt settings

1st - step; - 22 ft./lbs. 2nd - step; - 58 ft./lbs. 3rd - step, loosen all bolts completely; 4th - step; - 22 ft./lbs. 5th - step; - 54 ft./lbs.fig074.png

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. Hyundai Getz We have skimmed head & block, pressure tested head & obviously replaced head gasket and bolts, torqued to the right settings and still leaking oil. Any advice? Charmaine South Africa


Looking at the above there are only two possibilities it was not installed correctly or there is a hairline crack in the head or block. Second thought, make very sure the oil is not coming from another source only showing between the head and block. Oil leaks can be very deceiving wrt where the actual leak is.

May 23, 2017 | Hyundai Cars & Trucks

1 Answer

I need the cylinder head torque settings for a hyundai getz 1.6 16 valve double overhead cam Engine cod G4ED


renew bolts
stage1- 30NM
stage2-90deg
stage3-individually slacken off 360deg
stage4-30NM
stage5-90deg

crank pulley bolt-142NM
cam sprocket bolt-88NM

i like to help people like you that give engine codes it makes it so much easier

Jul 20, 2016 | Hyundai Cars & Trucks

1 Answer

Torque setting for flywheel bolts on hyundai getz 1.1


Get yourself a service manual, has all the torque specs

Nov 03, 2014 | Cars & Trucks

1 Answer

Torque settings on hyundai getz 1.6 Top and cam


The info is said to be available here, if the link still works. You may have to register yourself first.

http://www.hyundai-forums.com/attachments/getz-forum/57970d1353332110-help-hyundai-getz-1-6-torque-settings-getz-1.5-1.6-specs-torque-settings.pdf

Dec 20, 2013 | Cars & Trucks

1 Answer

Cylinder head torque settings


start in the middle and work your way alternatively outwards ,now in the book it gives these silly dynometric settings like 20 then turn backwards 120? and then tighten 90? ,what a load of brown stuff from cows ,now the proper colin way ,firstly pull down starting with a rachet on the middle two bolts then one up to the right then one down to the left and work your way outwards ,two fingers on the rachet ,now run over it again pulling the rachet properly and this should put about 50 lbs ,now with a decent bar or better still a clicky thing set to 65lbs and you will not be far wrong .This will be a proper job and you shouldnt need to pull the head down again.

May 19, 2013 | 2006 Hyundai Getz 1.4

1 Answer

Torque settings for 1.4 hyundai getz , main bearings


I need torque settings on hundai getz 1.4 Mains and big ends

Oct 20, 2012 | 2006 Hyundai Getz 1.4

1 Answer

What must i totque a hyundai getz 1.6 cylinder head


This is generic (4 cylinder - 10 bolts) starting in the center, top first then bottom, move over one position left or right top then make an "X" to the opposite side bottom. Then up and "x" back to bottom. One more "x" pattern for four remaning outside bolts. Final torque around 60 ft/lbs (generally).

Hope helps.

Feb 26, 2011 | Hyundai Accent Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...