Question about Lincoln Cars & Trucks
Trailer lights are fused in the main fuse box of the car
tail lights on a trailer are the same fuse for tail lights of the car , the same for brake lights and indicators
Posted on Dec 23, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is how to tell if system is working.Get into the vehicle and close door. Set ignition switch to on position and move the gear shifter to neutral. After a few secs. you should hear the compressor turn on. If it comes on then put shifter back to park leave ignition on and exit vehicle. Compressor will stop when you open the door but should start back up in a couple of secs. after you close the door. You can then walk around the vehicle and listen for leaks.
If compressor does not come on there are 3 fuses and a solid state relay that controls it along with the module.
The 3 fuses are no. 109(50amp) in the battery junction box under hood.This is the direct feed to compressor thru the solid state relay. The other 2 fuses are located in the interior fuse panel and they are no. 6 (5amp) and no. 12(15amp).
What we usually see though if compressor does not run is either a bad compressor or the solid state relay. They both are rather expensive so I would have an experience tech look at it then.
However If you feel confident enough and have a voltmeter or test light respond back and I will tell you which wires to check.
Posted on Mar 12, 2009
Most likely the problem you are experiencing with the park assist is a fault in one of the sensors mounted in the rear bumper. I would not consider it to be a major fix, however there will be a few hours labor involved as the bumper cover needs to be removed to replace the sensors.
Posted on Jul 08, 2009
The fuse block is located under the left side of the dash. The 10amp fuse you're looking for is the second from the bottom on the right side. It should be marked Tail. Hope this helps.
Posted on Mar 03, 2010
Tips for a great answer:
Apr 14, 2016 | 2007 GMC Envoy Denali
Jun 28, 2014 | 1998 Lincoln Navigator
Sep 21, 2013 | 2001 Lexus LS 430
Nov 04, 2010 | 2006 Ford F 350 Super Duty
Aug 07, 2010 | 2006 Chevrolet Trailblazer
Jun 16, 2010 | 1999 Lincoln Navigator
Feb 21, 2010 | 2006 Ford F-150
Nov 16, 2009 | 2003 Lincoln Navigator
Apr 06, 2009 | 1998 Lincoln Navigator
48 people viewed this question
Usually answered in minutes!