Question about 2002 Mercury Cougar
PCM, BCM/GEM, Instrument panel/cluster, Key and lock set. Engine and transmission has to be the same.
Posted on Dec 24, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the fuel filter is either blocked or installed in the wrong direction.the rotor and distributor cap are fine. swop the fuel filter around and try again.
Posted on Dec 02, 2008
SOURCE: i need to know the
I do Believe that they are 225/65/15's Do you have the Original Tires now???? If so They have the Size right on the Tire. The Letters and Writing are in Black But, If you take a Piece of Chalk and Highlight the Writing you can read it better. The writting is right on the Side of the Tire.
Posted on Jan 24, 2009
SOURCE: tire sizes
Open the front drivers door... or the passenger side front door... there should be a sticker there indicating correct tire sizes as well as pressures.
Please take a moment to rate this solution thanks
Posted on Jan 24, 2009
I just got done replacing the O2 sensors in my 99 Cougar due to throwing a P0135 malfunction code. There's 3. Facing the engine there's one in the front coming off of the front header, which is easy to get to. Another more tricky one if between the engine and the fire wall on the rear header pipe. The third is under the vehicle behind the transmission pan on top of the exhaust. In order to replace the O2 sensor near the fire wall you will need to remove the 4 retaining bolts for the ECM module and move it out of the way. Additionally you will need to remove the 2 retaining nuts for a wiring harness that is seated below the ECM module. Pay close attention to the connectors because the front and under vehicle O2 sensors have round connectors the one near the firewall has a squared connector. I was able to replace all 3 by myself in approximately 35 minutes. If your throwing a O2 heater malfunction code it is most likely going to be the sensor near the firewall. make sure that you know someone with a code reader so the code can be cleared. If you're do for an emmissions inspection be sure to put at least 40 miles on the new O2 sensor with different types of driving (e.g. highway, coasting, decellerated turns and rapid acceleration). Gotta love project cars for your kids!!
Posted on Apr 04, 2009
The correct diagram for your engine is located under the hood, Look on the radiator support, firewall, or sometimes on a valve cover...
Posted on Sep 09, 2009
Tips for a great answer:
Dec 13, 2015 | 1999 Mercury Cougar
Jan 05, 2015 | 2002 Mercury Cougar
Jan 03, 2015 | 2002 Mercury Cougar
Oct 10, 2014 | 2002 Mercury Cougar
Oct 05, 2013 | 2002 Mercury Cougar
Feb 10, 2013 | 2002 Mercury Cougar
Jun 13, 2009 | 2002 Mercury Cougar
Mar 18, 2009 | 1999 Mercury Cougar
Mar 05, 2015 | 2002 Mercury Cougar
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: