Question about 2000 Honda Accord

1 Answer

I have a 2000 Honda Accord EX that has excessive pressure coming out of the valve cover when I take off the oil cap off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 1,335 Answers

What is your question ? You may want to check your pcv to see if it's clogged.

Posted on Dec 23, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Engine is blowin oil out the fill cap on the valve cover on 2000 dodge 1500


Try to install a new oil cap if you don't have any problem while you dring you truck

Nov 01, 2012 | Cars & Trucks

1 Answer

Dtc p1457,0107


P1457 HONDA - Evaporative Emissions Control System Leakage EVAP Canister Systemxicon.jpghttp://engine-codes.com/p1457_honda.htmlForum CodePossible causes- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap There is a Honda factory service bulletin with information on how to diagnose the P1456 on the following Honda models:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
1998-2000 Honda Accord
symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vaporsP1457 HONDA Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned. In addition, the onboard refueling vapor recovery system (ORVR) stores fuel vapor generated when refueling in the EVAP canister.

The EVAP control system leak detection method improves the accuracy and frequency of the detection by determining faulty components and vapor leakage for each part. The EVAP control system (from the purge valve to the fuel tank) is divided into two parts. One is the "EVAP Canister Side" (from the EVAP two way valve to the purge valve) and the other is the "Tank Side" (from the EVAP two way valve to the fuel tank). There is 0.04 inch leak detection and 0.02 inch leak detection. If the 0.04 inch leak detection results are OK, the 0.02 inch leak detection runs. The P1457 code is detected when the EVAP system has a very small leak.

P0107 HONDA - Manifold Absolute Pressure Sensor Circuit Low Voltagexicon.jpghttp://engine-codes.com/p0107_honda.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor poor electrical circuit connector
- Faulty Manifold Absolute Pressure sensor
- Faulty Engine Control Module (ECM) When is the code detected?An excessively low voltage from the sensor is sent to ECMSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P0107 HONDA Description The Manifold Absolute Pressure sensor provides instantaneous manifold pressure information to the engine's Engine Control Module. The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.


In some vehicles the absolute pressure sensor is built into ECM. HONDA Technical Service Bulletins for P0107 code1999 HONDA ODYSSEY Electrical System 2000 HONDA ODYSSEY Electrical System1998 HONDA ACCORD Electrical System 1999 HONDA ACCORD Electrical System 2000 HONDA ACCORD Electrical System 2001 HONDA ACCORD Electrical System 2002 HONDA ACCORD Electrical System 1996 HONDA CIVIC Electrical System 1997 HONDA CIVIC Electrical System 1998 HONDA CIVIC Electrical System

Jul 25, 2012 | Honda Civic Cars & Trucks

3 Answers

1994 Honda Accord EX - will not start.


Possible timing belt, remove distributor cap and crank engine, if distributor rotor don't turn bad timing belt.

Apr 09, 2010 | 1994 Honda Accord

1 Answer

My 1989 Honda Accord is pushing oil out of valve cover into air cleaner. Motor Shot or some kind of intake issue giving pressure where there shouldn't be any? Makes the car run poorly when warm stalls out...


Could be a plugged PCV, or you are having excessive blow-by, oiling getting past the rings and out of the cylinders into the intake. I'd check the PCV (positive crankcase ventilation), shake it, you should hear somewhat of a "rattle" coming out of it. If not it's plugged up and needs replaced. Should be in a 3/8 size hose, or in the valve cover.

Mar 15, 2010 | 1989 Honda Accord 4 Door

1 Answer

I have a 2000 honda accord ex... My engine light is on and throwing the p1259 code. It is not a Vtec engine... help. I just got the oil changed and the light is still on. However they put 10w30 in.. should...


The P1259 : is problem in the VTEC Oil Pressure Switch circuit or VTEC Solenoid Valve circuit.
check the wire on the VTEC Oil Pressure if it's loose.

Feb 18, 2010 | 1997 Honda Civic

1 Answer

I have a 92 honda accord ex that the it idles go


If it does that when the engine is warmed up (full operating temp.) it may be you iac valve, or your fast idle valve. They get gummed up. It also could be your PVC valve, but probably not.:

accord8.jpg
IAC in red. Fast Idle in yellow. Your PVC valve is plugged into the valve cover (the black hose in between the red and yellow in the picture) it simply pulls out. It should rattle when shaken.
Hope this gives you a start on the problem.

Oct 09, 2009 | 1992 Honda Accord

1 Answer

My 1992 honda honda accord ex is leaking oil on the plugs after changing valve cover gasketand seals and plugs


You'll have to take the valve cover off again. There must be a piece of old gasket still under there somewhere, or your gasket isn't seated properly. Make sure the head is completely clean, and the valve cover.

Sep 25, 2009 | 1992 Honda Accord

1 Answer

2000 ex v6 honda accord code p01399


it could be the coil or distrubutor cap

Sep 11, 2009 | 2000 Honda Accord

2 Answers

Over presure inside the engine so the distributor oil seal pushes by oil and spill,i already replace the valve cover but its the same.what possible solution can beat it?


on the dist shaft there is an oring that seals at the engine if you remove your cap and then mark your dist so that you dont change the timing ,then remove the distributor and you will see the oring on the dist shaft ,replace it ,they get flat and hard and wont seal any longer ,good luck !

Aug 08, 2009 | 1996 Honda Accord

2 Answers

Oil leaking on 95 honda accord ex


hi the pressure switch leaking is a common problem.

Feb 05, 2009 | 1995 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...