Question about Cars & Trucks

1 Answer

The back glass in tailgate drags very slow and have to use my hands to pull and push. With what,where and how do I lubricant?

Rear glass motor is fine in this 1995 Bronco.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,475 Answers

Depending on the outside temperature, use these, see which works best for you.
1) A "dry" lubricant. There is made both a liquid and a powder. The powder is often graphite based, the liquid is like water.
2) A silicone spray.
3) A teflon based lubricant.
Read the labels so you do not use the wrong one and make it worse in cold weather.
Note: It sounds like you window regulator may be failing.
God bless your efforts.

Posted on Dec 23, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Blazer 2 door rear Glass opens but tailgate will not open


several things come to mind, how long since opened? if very long time might be latches rusted up, other is that connection inside has come loose. remove the inner liner of tailgate and look inside and try pulling the latch rods by hand and free up tailgate. fix rod if disconnected and /or clean latches with wd-40 and brush, spray clean and spray with lithium grease.

Jan 11, 2014 | 2003 Chevrolet Blazer

Tip

Fix 2005 tahoe rear wiper (other year GM SUVs may also apply)


My 2005 tahoe rear wiper was inop. The symptom was a pulsating buzz coming from the wiper motor, but no wiping action. I mistakenly bought a new wiper motor, which was not the cause. It was a bad ground, so instead of hunting the bad ground, I just added another grounding wire to the motor. Maybe my experience can help you. Make sure ignition is off and wiper is off. (As an added safety precaution disconnect the negative battery cable to prevent unexpected wiper action). To get access to wiper motor, open rear window glass to remove upper window trim surround. On either side of the window latch there are two black flat plastic "buttons". Release these by pushing from behind with a flat blade screw driver to pop out the center pin. With the pin extended the whole button can be pulled out. Open the tail gate and gently pry under the upper window trim to release clips from underneath. Remove upper window trim. Now to remove lower tailgate panel, remove bolt holding the pull strap. remove pull strap. As before gently pry lower panel to release clips from underneath. When all are loose, lift panel vertically to remove, by releasing the two "fingers" that fit into slots. Now that the motor is exposed, cut a short length of insulated stranded wire (like lamp wire) and crimp-on some terminal ends(just the stripped bare wire ends will also work). Attach from under a wiper motor frame mounting bolt (do not use either of the rubber insulated bolts) to under a mounting bolt on the window glass latch assy. Or you can also select any motor grounding point to any vehicle chassis grounding point as desired. Op test the wiper. Note: The window glass and tailgate will have to be closed to test. Hopefully it works properly. Put everything back in reverse order. Remember to slide fingers of lower panel into their slots before pushing clips secure. Also after remounting upper glass trim, fully insert the two plastic latch buttons with center pins extended, and then push in center pins.

on May 11, 2010 | Chevrolet Tahoe Cars & Trucks

1 Answer

1989 FORD BRONCO. REAR WINDOW STUCK IN UP POSITION AND MOTOR IS DEAD. HOW DO I GET THE WINDOW DOWN SO THAT I CAN DROP THE TAILGATE?


you have to climb over back seat and pull panel off tailgate pull the motor out and let window down by hand .

Sep 16, 2012 | 1989 Ford Bronco

1 Answer

02 liberty rear wiper dose not work plugin has power changed wiper motor still doses work


There is a nut under the black plastic bezel that needs to be removed. Here is the complete procedure for you to look at. Its possible that your arm isn't adjust at wiper motor...

REMOVAL
- Disconnect and isolate the battery negative cable.
- Remove the rear wiper arm from the rear wiper motor output shaft. (Refer to 8 - ELECTRICAL / REAR WIPERS / WASHERS/REAR WIPER ARM - REMOVAL).
- Using a small thin-bladed tool, gently pry at the notch in the base of the rear wiper motor output shaft bezel to unsnap the nut cover from the bezel (REAR WIPER MOTOR OUTPUT SHAFT NUT REMOVE/INSTALL). Be certain to take proper precautions to protect the outer tailgate panel and its paint finish from damage during this procedure.
- Remove the nut that secures the rear wiper motor output shaft to the outer swing gate panel (REAR WIPER MOTOR OUTPUT SHAFT NUT REMOVE/INSTALL).
- Remove the bezel and gasket from the rear wiper motor output shaft.
- Remove the trim panel from the tailgate inner panel. (Refer to 23 - BODY/SWING GATE/TRIM PANEL - REMOVAL).
- Disconnect the tailgate wire harness connector for the flip-up glass ajar switch from the flip-up glass latch connector receptacle.
- Disconnect the tailgate wire harness connector for the rear wiper motor from the motor connector receptacle (REAR WIPER MOTOR REMOVE/INSTALL).
- Loosen the two screws that secure the rear wiper motor mounting bracket to the top of the tailgate inner panel.
- Slide the rear wiper motor and mounting bracket forward far enough to disengage the two mounting screws from the keyed slots in the top of the tailgate inner panel.
- Remove the rear wiper motor and mounting bracket from the tailgate as a unit.

zjlimited_494.gif

1 - BEZEL AND GASKET
2 - OUTPUT SHAFT
3 - TAILGATE OUTER PANEL
4 - NUT
5 - NUT COVER

What you will need to do is to remove the small plastic cap on the wiper arm by prying it off with a screw driver. Then remove the nut that holds the arm onto the shaft. Then get yourself a battery cable puller (from auto parts store) and pull the arm off of the shaft..

zjlimited_495.gif

1 - SPARE TIRE
2 - WRENCH
3 - FLIP-UP GLASS
4 - PARK RAMP
5 - REAR WIPER ARM
6 - PIVOT COVER

Jul 19, 2011 | 2002 Jeep Liberty

1 Answer

Chevy uplander rear liftgate will not unlock


The tailgate on my 2008 Chevy Uplander refused to open. The unlock fuse was fine. The handle pull worked fine. I could even hear the little motor that unlocks the tailgate whirr when I pushed the unlock button. But the gate would not release. Turns out the problem was the lock mechanism was jammed because it had dirt in it and not enough grease. From the inside, I pulled the lift gate panel out at the window so I could look down and see the lock mechanism at the bottom of the lift gate. I reached down and prodded it with my screwdriver until I noticed that parts of the mechanism weren't sliding back and forth like they should. I sprayed it with a silicone lubricant until the parts started working again. Finally, the lock unlatched and I could open the rear hatch. I could then remove the entire plastic panel and remove the lock mechanism. I found that the mechanism has lots of rubber and plastic parts which get chewed up and start to jam if not properly lubricated. I cleaned out the dirt with my silicone spray and thoroughly lubricated all the moving parts. The latch now lets go of the post very easily, and the lift gate no longer gets stuck.

Nov 19, 2010 | 2005 Chevrolet Uplander

1 Answer

I can't get my hatch in the back of my truck to open it won't open any more. What can I do.


After a while, the mechanism (actuator) that unlocks and releases the rear glass hatch in your Blazer will eventually burn out. when it does, there is really no way to open the glass and lower the tailgate.
The only way to replace the burnt out actuator is to open the tailgate which you can't because the actuator is burnt out.

I've read stories that even the dealers don't know what to do, some have even cut up the back panel to reach the so-called manual release. Others said they pulled back the glued on carpet to search for it also.

Well if you don't want to hack up the tailgate panel or rip out your carpet, here's the easy way to open the glass:

You just pull back the interior tailgate panel right above the bump in the middle where the latch is. There are no screws or bolts in that area, you can safely pull it back about 2 inches. Then you'll have to stuck your finger in and push down the release bar.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

Good luck and hope this helps, The actuator that needs to be replaced costs $58 from the dealer. Keep me posted be glad to help you with this problem and don't forget to rate.

Jan 07, 2010 | 1996 Chevrolet Blazer

2 Answers

Rear hatch will notopen


Rear Hatch Release/Lock Failure: How To Open The Glass
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad); lg.php?bannerid=137&campaignid=106&zoneid=16&loc=1&referer=http%3a%2f%2fwww.s10forum.com%2fforum%2fadmincp%2fopenx_config.php%3fdo%3dox_zones&cb=d809956913 After a while, the mechanism (actuator) that unlocks and releases the rear glass hatch in
your Blazer or Jimmy will eventually burn out. when it does, there is really no way to open
the glass and lower the tailgate. The dash push button won't work, the rear key lock will
not work, the inside tailgat handle will not work, and you can not remove the interior
tailgate panel to access the mechanism because the screws can only be reach when
the tailgate is down (awesome GM design feature). The only way to replace the burnt
out actuator is to open the tailgate which you can't because the actuator is burnt out.

I've read stories that even the dealers don't know what to do, some have even cut up the
back panel to reach the so-called manuel release. Others said they pulled back the glued
on carpet to search for it also.

Well if you don't want to hack up the tailgate panel or rip out your carpet,
here's the easy way to open the glass:

You just pull back the interior tailgate panel right above the bump in the middle
where the latch is. There are no screws or bolts in that area, you can safely pull it back
about 2 inches. Then you'll have to stuck your finger in and push down the release bar.
See the 2 pictures below:
http://img.photobucket.com/albums/v2...z/IM000658.jpg
http://img.photobucket.com/albums/v2...z/IM000664.jpg
(No pictures allowed in this forum rolleyes.gif , oh well, click the links then)
The first pic is of the latch, it's the gold section.
The second pic shows what you need to push downward.
When you get your finger back there, you should be able to feel for the part that need to
be pushed down. When that part is pushed down, the glass has been unlocked.


Now that the glass is unlocked, it and the tailgate can be opened. Now you can remove the
interior tailgate panel, it has one screw on each side and easily lifts off.

The actuator that needs to be replaced costs $58 from the dealer, so if you don't want
to replace it yet, but still want to open the back, you can leave the panel off and just puch the
manuel release level. Here's the pic of the tailgate:
http://img.photobucket.com/albums/v2...z/IM000669.jpg
It's in the open section right below the latch, hows my fingure pushing it:
http://img.photobucket.com/albums/v2...z/IM000668.jpg

I haven't replaced my actuator yet, still trying to find it for cheaper than the dealer wants,
but hardly any part store guys know what the hell an actuator is

Nov 17, 2009 | 2001 GMC Jimmy

1 Answer

I'm having a similar problem with a 1997 GMC Jimmy. The glass won't open on the liftgate. I tried what the manual says for emergency release but nothing works. Does anyone have a suggestion or a picture of...


After a while, the mechanism (actuator) that unlocks and releases the rear glass hatch in your Jimmy will eventually burn out. when it does, there is really no way to open the glass and lower the tailgate.
The only way to replace the burnt out actuator is to open the tailgate which you can't because the actuator is burnt out.

I've read stories that even the dealers don't know what to do, some have even cut up the back panel to reach the so-called manual release. Others said they pulled back the glued on carpet to search for it also.

Well if you don't want to hack up the tailgate panel or rip out your carpet, here's the easy way to open the glass:

You just pull back the interior tailgate panel right above the bump in the middle where the latch is. There are no screws or bolts in that area, you can safely pull it back about 2 inches. Then you'll have to stuck your finger in and push down the release bar.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

Good luck and hope this helps, The actuator that needs to be replaced costs $58 from the dealer.

Nov 10, 2009 | 2000 GMC Jimmy

1 Answer

The rear hatch door won't open either with the remote or with the switch inside on the dash. As well, the hatch door handle won't open the door from inside.


After a while, the mechanism (actuator) that unlocks and releases the rear glass hatch in your Blazer or Jimmy will eventually burn out. when it does, there is really no way to open the glass and lower the tailgate.
The only way to replace the burnt out actuator is to open the tailgate which you can't because the actuator is burnt out.

I've read stories that even the dealers don't know what to do, some have even cut up the back panel to reach the so-called manuel release. Others said they pulled back the glued on carpet to search for it also. 

Well if you don't want to hack up the tailgate panel or rip out your carpet, here's the easy way to open the glass:

You just pull back the interior tailgate panel right above the bump in the middle where the latch is. There are no screws or bolts in that area, you can safely pull it back about 2 inches. Then you'll have to stuck your finger in and push down the release bar.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

Good luck and hope this helps, The actuator that needs to be replaced costs $58 from the dealer.

May 06, 2009 | 2005 Chevrolet Blazer

7 Answers

2004 envoy xuv tailgate problems, will not latch or open sideways.


the actuators have a white stem that sticks out of the bottom of them. if you push up on the ones on the driver side it will open the back hatch for you.

Jun 30, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...