Question about Cars & Trucks

1 Answer

Hi,when I turn the key over it automatically blows a fuse!! Please Help?

Yale forklift

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,109 Answers

Check the entire engine wiring harness, somewhere there is a wire or wires that are pinched or have rubbed through and grounded to the metal of the chassis, pay close attention where the wires move a lot. There is no quick fix, just careful examination for damaged wires. Obtain a wiring diagram and trace down the circuit that the fuse powers would also be very helpful.

Posted on Dec 23, 2016

Testimonial: "Thank you!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does fault 108-1 mean on a Yale forklift


Troubleshooting Yale - Forkliftaction.com

www.forkliftaction.com/forum/threadbybrand.asp?brid=97
No Trans Braking Error code 524264-14. Discussion started: 5 .... Error code 108-1displayed. Discussion ... Yale forklift has perkins 4203.2 engine oil capacity?

Oct 23, 2015 | Cars & Trucks

1 Answer

No power to horn button on a yale forklift


at the horn buton use grownd no power

Oct 21, 2014 | Cars & Trucks

1 Answer

Why does my efi fuse keeps popping 1999 chevy prizm


Pull the EFI relay, replace the fuse, and see if it blows when you turn the key on. If it does not turn the key off, reinstall the EFI relay and remove the circuit opening relay/fuel pump relay. Turn the key on. If the fuse blows than we know the problem is One of the O2 sensors, the IAC, the purge solenoid, or the ECM You can unplug the O2 sensors, iac, and purge solenoid. Replace the fuse, turn the key on, and plug them in one at a time until the fuse blows. Replace that component. If the fuse blows with those unplugged than its probaly the wiring and possibly the ECM. let me know what you find and I'll help you more if needed.

Aug 05, 2012 | 1999 Chevrolet Prizm

1 Answer

We have a 2000 Solara that we just replaced the battery in, or rather, we tried, and the horn is now staying on continuously. It keeps blowing a 100 amp fuse, and does not have a key fob type alarm. The...


Why was the battery replaced? Theres no reason the the 100 amp fuse to blow unless the alternator is shorted or you hooked up the battery backwards. I think the 100 amp fuse goes to the alternator. If it was hooked up backwards then you may have engine computer damage.

Aug 25, 2011 | 2000 Toyota Camry Solara

1 Answer

Blowes the pcm fuse when key turn on


Hi, if you have the 4-cylinder, only the PCM and the ignition is on this fuse. If you have the V-6, the camshaft and crankshaft sensors are also on it. What I recommend is to disconnect everything on the fuse except the PCM, and then turn the key on. If the fuse blows, you know your PCM is shorted. If it doesn't blow, reconnect the ignition module and turn the key on again. If the fuse blows, you know the ignition is bad. If not, plug in the sensors one at a time to see which one is shorted. The location of the sensors are shown below, but there are 2 possible locations for the crankshaft sensor. The ignition module is under the coil pack. Please let me know if you have any questions, and thanks for using FixYa.
jturcotte_2027.gif

jturcotte_2028.gif

jturcotte_2029.gif

jturcotte_2030.gif

jturcotte_560.jpg
Ignition module

Aug 06, 2011 | 1995 Oldsmobile Achieva

1 Answer

Stop light and gear shift lock not working


check the switch on the brake pedal.it may be cracked and not sending power to the interlock solenoid,and there may be a short,which will blow the fuse.check the wiring around the rear lights and make sure the harness has not been rubbing on sharp metal

Jun 04, 2009 | 1994 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...