Question about Cars & Trucks

1 Answer

SHOW TIMING MARKS ON YHE CAMSHAFTS - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,335 Answers

It would help if you add the year, make and model of your vehicle.

Posted on Dec 23, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bmw m42 engine. The sprockets on the camshafts must be refitted, which way do the arrows point


You must use a special tool which bolts onto the cylinder head. It is designed to hold the camshafts in the proper position. It goes over the flats on the camshafts to hold the camshafts in the correct position. This tool can be rented. Look on EBay or check with your local Snap On Tools, Mac Tools, or Matco Tools dealers to rent one. See the link below for photos of properly aligned timing marks for your engine.

1994 BMW M42 timing chain alignment marks Google Search

Apr 25, 2014 | 1994 BMW 3 Series

1 Answer

Timing a 3.6


There are no timing marks.... There is a special tool that holds the camshafts in position. I never use that tool. I just use paint marks, marking the old timing belt to the pulleys, then transferring over marks to new timing belt. If you have never done it, you are taking a pretty big risk with this engine.

Jan 29, 2014 | 2006 Volkswagen Passat

1 Answer

Camshaft timing marks


Hi all. I am looking for the timing marks on a Hyundai Sonata Vivante V6 2.5lt Eng. Te camshafts Sprockets do not have any marks (chain driven) Thanks Andries.

Jan 12, 2014 | Cars & Trucks

4 Answers

Need diagram to replace timing belt on 2000 dodge intrepid 3.5 engine


I Show Only a 3.2L For this Year this Will Guide you Enjoy your Work RejakWilson


REMOVAL

CAUTION: The following procedure can only be used when the camshaft sprockets HAVE NOT BEEN LOOSENED or removed from the camshafts. Refer to Camshaft Gear/Sprocket and Timing Components, if sprocket(s) or camshaft(s) have been loosened or removed.

CAUTION: The 3.2/3.5L are NOT freewheeling engines. Therefore, care should be taken not to rotate the camshafts or crankshaft with the timing belt removed.

  1. Disconnect negative cable from remote jumper terminal.
  2. Remove upper radiator crossmember.
  3. Disconnect fan module electrical connector.
  4. Remove cooling fan module and accessory drive belts.
  5. Remove crankshaft damper and front timing belt covers.
  6. Mark belt running direction, if timing belt is to be reused.
CAUTION: When aligning timing marks, always rotate engine by turning the crankshaft. Failure to do so will result in valve and/or piston damage.

f90f2f1.gif Fig. 94

  1. Rotate engine clockwise until crankshaft mark aligns with the TDC mark on oil pump housing and the camshaft sprocket timing marks are between the marks on the rear covers (Fig. 94).
CAUTION: Align the camshaft sprockets between the marks on rear belt covers before timing belt removal or damage to valve and/or pistons could occur.

  1. Using a ink or paint marker; mark the exact position of the camshaft sprocket timing mark relative to the two timing marks on the rear timing cover.
NOTE: When timing belt tensioner is removed from engine, always store in the vertical (plunger facing upward) position

09766f9.gif Fig. 95

  1. Remove the timing belt tensioner (Fig. 95) and remove timing belt.
TIMING BELT TENSIONER

  1. When tensioner is removed from the engine it is necessary to compress the plunger into the tensioner body.
CAUTION: Compress the tensioner slowly, as damage to tensioner could result.

c719a3d.gif Fig. 96

  1. Place the tensioner into a vise and SLOWLY compress the plunger (Fig. 96). Total bleed down of tensioner should take about 5 minutes.
CAUTION: Index the tensioner in the vise the same way it is installed on the engine. This is to ensure proper pin orientation when tensioner is installed on the engine.

  1. When plunger is compressed into the tensioner body install a pin through the body and plunger to retain plunger in place until tensioner is installed.
NOTE: When timing belt tensioner is removed from engine, always store in the vertical (plunger facing upward) position.

INSTALLATION

CAUTION: This procedure can only be used when the camshaft sprockets HAVE NOT BEEN LOOSENED or removed from the camshafts.

CAUTION: If camshafts have moved from the timing marks, always rotate camshaft towards the direction nearest to the timing marks (DO NOT TURN CAMSHAFTS A FULL REVOLUTION OR DAMAGE to valves and/or pistons could result).

a7cd673.gif
Fig. 97

  1. Align the crankshaft sprocket with the TDC mark on oil pump cover (Fig. 97).
  2. Align the camshaft sprockets (to reference mark made upon removal) between the marks on the rear covers (Fig. 94).
  3. Install the timing belt starting at the crankshaft sprocket going in a counterclockwise direction (Fig. 97). Install the belt around the last sprocket. Maintain tension on the belt as it is positioned around the tensioner pulley.
  4. Holding the tensioner pulley against the belt, Install the tensioner into the housing and tighten to 28 Nm (250 in. lbs.) . Each camshaft sprocket mark should still fall between the cover marks.
  5. When tensioner is in place pull retaining pin to allow the tensioner to extend to the pulley bracket.
  6. Rotate crankshaft sprocket 2 revolutions and check the timing marks on the camshafts and crankshaft. The marks should line up within their respective locations (Fig. 97). If marks do not line up, repeat procedure.
  7. Install timing belt covers and crankshaft damper.
  8. Install accessory drive belts and cooling fan module.
  9. Install upper radiator crossmember.
  10. Connect negative cable to remote jumper terminal.
  11. Start engine and allow to idle for approximately 1 minute. If a noise is present from the timing belt/tensioner, air has possibly entered the tensioner.
    1. To remove air from tensioner; using a DRB III, operate the engine at speed of 1600-2000 RPM for 10 minutes. This will purge air from tensioner.
NOTE: If air is present, the timing belt tensioner will be soft and may generate noise. This noise should disappear after no more than 15 minutes of engine running time.

Oct 21, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

Hi, I am looking for a timing belt diagram for a 1998 2.5ltr Subaru Outback or can you tell me which timing marks on the sprockets line up to the encasing.


Timing Belt Cover, Belt & Sprockets Removal & Installation 2.5L Engine To Remove:
  1. Remove the drive belts.
  2. Remove the A/C compressor drive belt tensioner. Timing belt & cover DOHC exploded view subaru-03-25-6470.gif

  3. Remove the crankshaft pulley.
  4. Remove the mounting bolts and left timing belt cover.
  5. Remove the mounting bolts and right timing belt cover.
  6. Remove the mounting bolts and front timing belt cover.
  7. Vehicles W/ M/T: Remove the timing belt guide.
  8. Ensure that the timing belt rotation arrows are still visible. If the marks are worn off, place new rotation marks on the belt. Timing belt alignment marks DOHC subaru-03-25-6472.gif

  9. Turn the crankshaft using a breaker bar and special adapter socket on the crankshaft. Align the timing mark on the crankshaft sprocket (1), left intake sprocket (2), left exhaust sprocket (3), right intake sprocket (4) and right exhaust sprocket (5) with the notches in cylinder block and timing belt cover.
  10. Paint alignment marks on the timing belt at the crankshaft and camshaft sprockets timing marks. CAUTION
    Do not turn the camshaft sprockets with the timing belt removed. The valves heads will contact each other causing the valve stems to bend.
  11. Remove the lower right idler pulley.
  12. Remove the timing belt.
  13. Remove the upper right idler pulley.
  14. Remove the lower left (toothed) idler pulley.
  15. Remove the belt tensioner.
  16. Hold the sprocket and remove the left intake and exhaust camshafts.
  17. Hold the sprocket and remove the right intake and exhaust camshafts.
  18. Remove the crankshaft sprocket.
To Install:
  1. Install the crankshaft sprocket.
  2. Hold the sprocket and install the right intake and exhaust camshafts with the mounting bolts. Tighten 58 ft-lb (78 Nm).
  3. Hold the sprocket and install the left intake and exhaust camshafts with the mounting bolts. Tighten 58 ft-lb (78 Nm).
  4. Reset the automatic belt tensioner as follows:
    • Remove the mounting bolt and belt tensioner. NOTE: Do not exceed more than 2,205 lb. (9,807 N).
    • Place the belt tensioner on a press. Press the adjuster rod down gradually (using more than 3 minutes) 66- lb (165 N) or more until the adjuster rod is aligned with the stop pin hole in the cylinder.
    • Insert a 0.08 in (2 mm) diameter pin or hex wrench into the pin hole to lock the adjuster rod.
    • Install the automatic belt tension adjuster with the mounting bolt. Tighten 18 ft-lb (25 Nm).
  5. Install the lower left (toothed) idler pulley. Tighten 29 ft-lb (39 Nm).
  6. Install the upper right idler pulley with the mounting bolt. Tighten 29 ft-lb (39 Nm). Crankshaft sprocket and oil pump cover alignment marks 2.5L DOHC subaru-03-25-4890.gif

  7. Align the timing mark on the crankshaft sprocket with the mark on the oil pump cover. Timing belt alignment marks DOHC subaru-03-25-6472.gif

  8. Align the single timing mark on the right exhaust camshaft sprocket with the notch on the timing belt cover.
  9. When the single timing mark on the right exhaust camshaft sprocket is aligned with the notch on the timing belt cover, ensure that the double lines on the intake camshaft and exhaust camshaft sprockets are aligned.
  10. Align the single timing mark on the left exhaust camshaft sprocket with the notch on the timing belt cover by turning the sprocket counter clockwise (viewed from front of engine).
  11. Ensure that the double lines on the intake camshaft and exhaust camshaft sprockets are aligned when the single timing mark on the left exhaust camshaft sprocket is aligned with the notch on the timing belt cover. CAUTION
    • The camshafts can be rotated independently causing the valves heads to contact each other resulting in bent valve stems.
    • When the timing belt is removed the camshafts will turn to the lowest cam lobe position by the force of the valve springs. Before installing the timing belt the 4 camshafts are in the lowest lift position (valves closed).
    • When the camshafts are rotated to install the timing belts, # 2 intake and # 4 exhaust cam lobes of the left camshafts are held to push their corresponding valves down. In this position, these valves are held in the open position. Right camshafts are held so their cam lobes do not push the valves down.
    • The left camshafts must be rotated from the lowest lobe position to the position where the timing belt can be installed at the smallest possible angle in order to prevent intake and exhaust valve contact. Camshaft sprockets rotation subaru-03-25-6473.gif

    • Do not turn the camshafts in the direction shown in the illustration because the valves will open at the same time and contact each other.
    CAUTION
    If the timing belt alignment is off the mark buy more than 3 teeth, the valves and pistons may have contact.
    Timing belt alignment marks DOHC subaru-03-25-6472.gif

  12. Align the timing marks on the belt with the marks on the sprockets in the numerical order shown in the illustration.
  13. Install the lower right idler pulley with the mounting bolt. Tighten 29 ft-lb (39 Nm).
  14. Ensure that the timing mark alignment is correct and remove the tensioner stop pin.
  15. Vehicles W/ M/T: Install the timing belt guide and temporarily tighten the mounting bolts.
  16. Vehicles W/ M/T: Measure the clearance between the guide and timing belt. The clearance should measure 0.039 ± 0.020 in (1.0 ± 0.5 mm).
  17. Vehicles W/ M/T: Tighten the guide bolts 7.2 ft-lb (9.8 Nm).
  18. Install and secure the front timing belt cover with the mounting bolts.
  19. Install and secure the right timing belt cover with the mounting bolts.
  20. Install and secure the left timing belt cover with the mounting bolts.
  21. Install the crankshaft pulley.
  22. Install the A/C compressor drive belt tensioner.
  23. Install the drive belts.
prev.gif next.gif

Sep 30, 2010 | Subaru Outback Cars & Trucks

1 Answer

Where are the timing marks on a 1998 ford contour lx zetec


If you are refering to the timing marks for timing chain alignment then you will need a special tool that fits in the end of the camshafts on the drivers side of the engine. You can make a tool to align the 2 camshafts out of some flat stock. The crankshaft mark will be on the crankshaft gear and engine. There are no marks on the camshaft gears.

Apr 28, 2010 | 1998 Ford Contour

1 Answer

We are needing a 1996 Saturn SL2 timing settings and something to show us where to find the marks. Can you help?


10109db.jpg

Fig. 1: At 90 degrees past TDC, the crankshaft sprocket timing mark and keyway will align with the main bearing cap split line.


6a5b7fb.jpg

Fig. Insert the timing pin to ensure that the camshaft is at No. 1 TDC-SOHC engine


11107cd.jpg

Fig. : When the camshaft is at TDC, rotate the crankshaft counterclockwise 90 degrees to achieve TDC


e6e28ff.jpg

Fig.: Insert the timing pins to verify that the camshafts are at TDC


da548e5.jpg

Fig. : Make sure that the silver link plates and reference marks are all in alignment as shown


Hope help with this (remember comment and rated this).

Apr 13, 2010 | 1996 Saturn SL

1 Answer

When you change the water pump on a 90 corola 4-door sedan are there alignment marks to get the cams back "in-time" or is there a trick to it?


If you removed the timing belt to fit the new water pump then you have to reset the timing on camshafts/and bottom pully and ... the bottom pully has a mark on gear and casing and the KEYWAY should be dead straight up. and the camshafts have timing marks on the gears and casing behind the cover..
Have fun

Oct 07, 2009 | 1990 Toyota Corolla

1 Answer

Need timing marks for Daewoo engine in Chevy Aveo It is a1.6 liter double overhead cam


The crankshaft gear has a triangle timing mark on it. On the outside of the gear near the teeth. This points straight down, and lines up with a notch, on the bottom of the rear timing cover.

The camshafts have a mark on the outside of the gear, near the teeth. The camshafts are turned, so that the marks are to the inside, (in-between the gears), and the marks point to each other.

Jul 21, 2009 | 2004 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...