Question about DAF Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the oil pressure switch is on pssenger side, lower engine area,beside oil filter, mounted in engine block. The pressure relief valve is in the oil pump, in which case, you have to drop the oil pan,and take off the oil pump.
Posted on Jan 31, 2009
I have a 93 f150 my ac bulds up to much pressir and pops off the relefe valve ive replaced every thing any sugestions?
Posted on Sep 07, 2009
The oil pressure relief valve should be on the oil pump.If your oil pressure is ok,have the wiring tested to theswitches or try another set of clocks
Posted on Sep 16, 2009
Check the fuse to the fuel pump.
The issue is repeated blowing of the fuel pump fuse. This occurs randomly and without warning, normally when medium to high throttle is applied. Generally the RPM's will fluctuate briefly before the fuse blows, which cuts off ALL power to the vehicle.
Especially dangerous on a highway! The first mechanic found a TSB related to the fuel pump resistor, and its default location in the wheel well can cause premature corrosion. Replaced it and relocated as per the TSB.
You can bypass the resistor, it's simple and free. You bend pin 85 on the fuel pump relay #15, in your engine bay fuse and relay box. Good luck and keep me posted, at worst ti's going to be a bad fuel pump and your going to have to drop the gas tank to replace the fuel pump. When you bend the #85 pin from the relay, will set the fuel pump on high mode bypassing the resistor.
Posted on Dec 22, 2009
SOURCE: po171 code keeps coming up,
did you check the o2 sensor bank 1 ? cause de p0171 code say sistem too lean bank 1 do you need replace this sensor and get a better fuel saving . or maybe is disconected or the o2 sensor wires could by cut o burn, i think about you problem is not the fuel sistem . clean again carefully the maf sensor without broke the tiny couple wires thks
Posted on Aug 07, 2010
Tips for a great answer:
Jul 10, 2017 | Cars & Trucks
Jul 31, 2016 | DAF Cars & Trucks
Jul 15, 2016 | DAF Cars & Trucks
Jan 12, 2015 | DAF Cars & Trucks
Oct 30, 2014 | Cars & Trucks
Apr 03, 2014 | 1994 Ford Bronco
Sep 01, 2009 | 1997 Volkswagen Eurovan
Jan 31, 2009 | 1989 Toyota Land Cruiser
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: