Question about 2005 Chevrolet Monte Carlo

Open Question

Removing heater core from a 2005 monte carlo - 2005 Chevrolet Monte Carlo

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 12650 Answers

SOURCE: does dash have to be removed to install heater

no- to make it easier to work on heater core remove glove box takes a couple of minutes

Posted on Nov 03, 2009

Ad
techbuster
  • 5081 Answers

SOURCE: replacing heater core on 2004 monte carlo

REMOVAL PROCEDURE 1. Remove the fuel injector sight shield. 2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System. 3. Use J 38185 in order to position aside the heater hose inlet and outlet clamps at the heater core. 4. Disconnect the inlet and outlet heater hose from the heater core. 5. Remove the RH Instrument Panel Closeout/Insulator panel. 6. Remove the LH Instrument Panel Closeout/Insulator panel 7. Remove the floor carpet. 8. Remove the rear floor air outlet duct from the holes in the floor reinforcement. 9. Disconnect the rear floor air outlet duct from the heater air outlet cover. 10. Remove the rear floor air outlet duct. 11. Remove the heater air outlet cover screws (2). 12. Remove the heater air outlet cover heat stakes (1) with a small chisel. 13. Remove the heater air outlet cover from the HVAC module assembly. 14. Remove the heater core cover screws (2). 15. Remove the heater core cover heat stakes (1) with a small chisel. 16. Remove the heater core cover from the HVAC module assembly. 17. Remove the heater core from the HVAC module assembly. 18. Remove the heater core foam seal (1) from the HVAC module assembly

Posted on Nov 08, 2009

  • 53 Answers

SOURCE: hoe do i bypass the

they sell a bypass kit and where the 2 heater hoses go into the fire wall you disconnect them and the kit splices the together with clamps

Posted on Dec 02, 2010

  • 466 Answers

SOURCE: where is the heater core

in the dashs. in center. follow heater hoses under hood. this will give you a better idea.

Posted on Dec 25, 2010

weekspena
  • 375 Answers

SOURCE: where is the heater core

behind the glove box maby this will help!
Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core.
Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Posted on Jan 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monte Carlo heater core


I don't know if top or bottom, but the heater core inlet will be the hose coming from either the intake manifold or a fitting on a cylinder head. The outlet from the heater core goes to the front of the engine, it goes into the water pump. I think all GM engines are like this, and almost all engine designs likewise. On a 1992 3.8L, for example, the heater core inlet hose comes from the intake manifold on the passenger side. The heater core outlet goes into a fitting on the water pump (lower front of engine).

Aug 02, 2015 | Cars & Trucks

1 Answer

How do you replace the heater core on a 1999 monte carlo


UNFORTUNETLY YOU REMOVE THE DASH AND ITS LOCATED AGINST THE FIRE WALL

Aug 03, 2011 | 1999 Chevrolet Monte Carlo

1 Answer

Where is the heater core located on a 2005 Monte Carlo?


behind the glove box maby this will help!
Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core.
Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 28, 2010 | 2005 Chevrolet Monte Carlo

1 Answer

Water leaking from blower motor housing 2007 monte carlo how to fix?


If it's clear water that's normal, if not, it's either heater hose or core.

Oct 02, 2010 | 2005 Chevrolet Monte Carlo

1 Answer

Whats involved in changing a heater core in my 2002 monte ?


Hello! Remove the fuel injection appearance cover (if it has one)

Drain cooling system

Disconnect heater hoses

Rmv. right/left instrument panel closeouts

Rmv. the carpet

Rmv. rear floor air outlet duct from floor re-enforcement

Rmv. the rear floor air outlet duct

Rmv. the outlet cover screws and heat stakes using a small chisel

Rmv. the outlet cover from the HVAC assembly

Rmv. heater core cover screws and heat stakes using a small chisel

Rmv. heater core cover from HVAC assembly

Rmv. heater core from HVAC assembly

Guru...saailer....Installation to follow




Feb 16, 2010 | 2002 Chevrolet Monte Carlo

1 Answer

Replacing heater core on 2004 monte carlo


REMOVAL PROCEDURE 1. Remove the fuel injector sight shield. 2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System. 3. Use J 38185 in order to position aside the heater hose inlet and outlet clamps at the heater core. 4. Disconnect the inlet and outlet heater hose from the heater core. 5. Remove the RH Instrument Panel Closeout/Insulator panel. 6. Remove the LH Instrument Panel Closeout/Insulator panel 7. Remove the floor carpet. 8. Remove the rear floor air outlet duct from the holes in the floor reinforcement. 9. Disconnect the rear floor air outlet duct from the heater air outlet cover. 10. Remove the rear floor air outlet duct. 11. Remove the heater air outlet cover screws (2). 12. Remove the heater air outlet cover heat stakes (1) with a small chisel. 13. Remove the heater air outlet cover from the HVAC module assembly. 14. Remove the heater core cover screws (2). 15. Remove the heater core cover heat stakes (1) with a small chisel. 16. Remove the heater core cover from the HVAC module assembly. 17. Remove the heater core from the HVAC module assembly. 18. Remove the heater core foam seal (1) from the HVAC module assembly

Nov 08, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

Does dash have to be removed to install heater core for 1985 monte carlo


no- to make it easier to work on heater core remove glove box takes a couple of minutes

Nov 03, 2009 | 1985 Chevrolet Monte Carlo

1 Answer

I need to know how to change a heater core in a 81 monte carlo. don't have a book to go by


A good place to find such information is at WWW.AutoZone.com.
You can select your make and model of vehicle, go to the "how to" section and in many cases it will give you the instructions for replacing various parts and it is free.
AllData.com is another resource that you will pay less than $30 a year for your first vehicle, it is an on-line service manual web site, very good.
Below is the procedure for replacing your heater from the Auto Zone site.
Good luck, let me know.
Regards,

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core.
Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Sep 15, 2009 | 1983 Chevrolet Monte Carlo

2 Answers

Passenger side coolant leak 2004 chevy monte carlo


it is most likely coming out of the weep hole at the water pump or the plastic fittings on the water pump to upper intake manifold they are black in color ands are L shaped with O-rings

Apr 19, 2009 | 2005 Chevrolet Monte Carlo

1 Answer

1987 Monte Carlo


sounds like a heater core "antifreese" leak

Jan 13, 2009 | 1987 Chevrolet Monte Carlo

Not finding what you are looking for?
2005 Chevrolet Monte Carlo Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...