Question about Hyundai Motor 1998 Sonata

Open Question

My running lights do not go off when i turn the switch to the off position on a 1998 hyundai sonata

Posted by on

  • yadayada
    yadayada Dec 22, 2016

    Do you mean the day time running lights? (DRL)

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2006 Hyundai Sonata brake light problem

there is a tsb for the brake switch in 06 sonatas. it must be adjusted or replaced by dealership. is your check engine light on, if so its probably code p0504

Posted on Jun 29, 2008

Ad
  • 21 Answers

SOURCE: replacing heater switch in 2004 hyundai sonata

Open the ashtray, and grab the bottom of the bezel. Its only clipped in, so give it a yank and the bezel will come off. Unplug the connectors and replace your switch.

Posted on Jul 02, 2008

csmock132
  • 4669 Answers

SOURCE: blinking light on center of the dashboard on Hyundai Sonata

That is your security light, It tells you the security system is active.

Posted on Apr 01, 2009

  • 2 Answers

SOURCE: how do you reset the check engine light on hyundai sonata?

Just disconnect your battery for a couple of minutes.

Posted on Jul 20, 2009

ghost45
  • 1280 Answers

SOURCE: I have a 2000 hyundai Sonata, 6 cylinder eng. My

The sensor is located on the left hand rear side of the block (near the bell housing). It is held in place by a 10mm bolt. It's to the right of the exhaust manifold (LH - radiator side) on the V6. Once you purchase the new sensor you'll be able to identify it on the engine. The connector to this sensor is located in the illustration.
2cb09a4.jpg A word to the wise... replace the O2 snsr as well.

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW PROGRAM THE KEY LESS ENTRY FOR SONATA 2012


  1. Cars
  2. Car Maintenance
  3. General Car Maintenance
  4. How to Program Keyless Entry Remotes in a Hyundai Sonata
How to Program Keyless Entry Remotes in a Hyundai Sonata By Christian Killian, eHow Contributor
20Found This Helpful The keyless entry system in your Hyundai Sonata is part of the factory alarm system. If you have to replace a lost or damaged remote, reprogramming will be necessary. The remote is important because not only does it lock and unlock the doors, it also arms and disarms that factory alarm when you open or close your car doors. New remotes are available from any Hyundai dealer. While they will program it for you, you can do it yourself and save a programming fee.
How to Program Keyless Entry Remotes in a Hyundai Sonata(Kleophaus Livingston/Demand Media)

Other People Are Reading


Step 1: Locate the fuse panel under the dash on the driver's side of the car. Just below it is the control module for the factory alarm system. Open the cover on the alarm system control module and locate the memory switch inside.
(Kleophaus Livingston/Demand Media) Step 2: Verify that the switch is in the "Off" position; if it is not, switch it to the "Off" position. This is important for the system to understand what you want it to do when you move to the programming mode.
(Kleophaus Livingston/Demand Media) Sponsored Links
Step 3: Insert the key into the ignition of your Sonata and turn the key to the "On" position. Wait for 60 seconds, then move the memory switch inside the control module to "Set."
(Kleophaus Livingston/Demand Media) Step 4: Depress and hold the "Lock" button on your remote for one full minute. This allows the remote and the control module to communicate and sync. Release the "Lock" button and turn the memory switch in the control module back to the "Off" position.
(Kleophaus Livingston/Demand Media) Step 5: Turn the ignition switch to the "Off" position and test the remote by pressing the "Lock" or "Unlock" button, verifying that the doors do lock or unlock.


Read more : http://www.ehow.com/how_6362326_program-entry-remotes-hyundai-sonata.html

Mar 29, 2015 | Hyundai Sonata Cars & Trucks

1 Answer

Hyundai sonata transmission


The transmission range switch that detects the shift lever position (N or P) could be short circuited. Replace the switch or correct the wirings.

Apr 23, 2013 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Hyundai sonata will noy shift out of park


Can you shift out of park if you don't start the engine ?
Often times the brake light switch is faulty or the solenoid that locks the shifter. Sometimes the shifter can be moved if the key lock is turned but not to the on position.

Aug 08, 2012 | 1992 Hyundai Sonata

1 Answer

2006 Hyundai Sonata, Doors do not turn on interior light


Hi

Make sure all door switches are functioning properly. See that each switch pushes in and out, without sticking.

Feb 09, 2010 | 2006 Hyundai Sonata

1 Answer

Sonata brake lights stay on, assume faulty switch, where is it to change?


The brake light switch should be on the brake pedal near the top. Look for a circular item or box with 2 or 4 wires coming out of it at the top end of the brake pedal.

Jan 07, 2010 | Hyundai Motor 1998 Sonata

1 Answer

Kelli says to move switch for dome light to dome for door activation on '08 Sonata, but I see no such switch. Where is it?


That particular switch is on the dome light itself. It'll have three settings, Off, On, and Dome. Just like it says, the Off position makes sure the dome light never comes on, the On position makes sure the dome light is always on and the Dome position makes sure the dome light comes on when you open the door.

Nov 19, 2009 | 2008 Hyundai Sonata

1 Answer

Need help replacing 1998 hyundai sonata fuel pump


in order to replace fuel pump one has to drop the gas tank.. make sure car is turned off unplug all hoses and electrical switches, once the gas tank is off the car the fuel pump is visible on the top side of the tank... simply replace the old pump with the new one.... place gas tank back in place plug all hoses and switches back..turn car on and leave it on idle for a couple of min..

Jun 13, 2009 | Hyundai Motor 1998 Sonata

1 Answer

Hyundai Sonata 06 engine runs key out ignition in off position


car should be under warranty .. try having a new key made .if that dosent fix it. it's in the key lock maybe a wire loose .

Jan 21, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
Hyundai Motor 1998 Sonata Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...