Question about Nissan Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
had to install a driver side non folding mirror, fairly simply to say the least. There's a cover on the interior of the door, near the window, remove the cover, remove the 3 screws, need i believe a 10mm socket. If a power window, unhook the circuit. Replace new mirror.
Posted on Aug 25, 2008
It is manual adjustable.
Here is the photo where you can find it ("saatoruuvi"= "adjustable srew")
Posted on Jun 05, 2009
SOURCE: headlights needs ajusting
on each headlamp assembly, there will be either one or two plastic nuts that you can turn.
If you only have one nut on each, that will adjust the vertical aim of the headlights.
If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Mar 09, 2015 | Nissan Cars & Trucks
Mar 09, 2013 | 1993 Honda Accord
Oct 22, 2012 | Honda Civic Coupe
Aug 28, 2012 | Chevrolet Cavalier Cars & Trucks
Mar 06, 2010 | Toyota Starlet Cars & Trucks
Jan 23, 2010 | 2006 Ford Freestyle
Nov 20, 2009 | 1999 Subaru Legacy
Oct 26, 2009 | 2005 Nissan Sentra
Apr 24, 2009 | 2008 Ford F-350
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: