Question about Cars & Trucks

Open Question

Don't understand odometer readings. After a round of 18 holes the reading was 18.62. What does this mean?!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 109 Answers

SOURCE: odometer reads no bus

check bulkhead connecter for corrosion, cluster is your body controll module, losing signal to fuel pump module , and pcm, thios is a communication issue, volt meter wil help, back probe diagnostic connecter, pin 7, white wire, to see if signal is there, GOOD LUCK RDJRP

Posted on Aug 03, 2009

  • 1 Answer

SOURCE: 2000 buick odometer want light up cant read the

Odometer and shifter display does not light up

Posted on Nov 15, 2009

kb8dns
  • 494 Answers

SOURCE: I am getting inconsistent odometer readings. For a

Newer car have an electronic speedometer and the problem can be a bad sensor at the transmission or to the computer. The sensor picks up the signal through a magnetic device in the transmission, this sensor could be at fault.....

Posted on Feb 13, 2010

  • 510 Answers

SOURCE: 2001 Ml230 odometer reads -2.0L

Service due

Posted on Mar 01, 2010

  • 447 Answers

SOURCE: i have an 04 dodge ram 1500 and my digital

What this means is that the dash has lost it BUS type communication with one or more of the other control modules [computers] To diagnose this you would need a scan tool that can communicate with the various control modules to see if there are any service codes or modules that have quit talking to other modules for some reason. Best bet on this one might be a trip to the dealer or a very good repair shop.

Posted on Jun 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please I'm still waiting for any solution What My 1995 c280 Mercedes Benz can not raise or fire beyond 20 odometer at idle, please what could be the problem


every one is having trouble trying to understand what you are saying
cannot fire or raise ----does that mean cannot accelerate the engine
beyond 20 odometer does that mean faster than 20 mph(klm ph)
or does it simply mean that it will not rev higher than 2000 rpm on the tachometer
a odometer reads speed and a tacho reads engine rpms
so you can see why no one is answering your question
it is confusing as to what you are saying

Sep 18, 2016 | 1995 Mercedes-Benz C-Class

1 Answer

9A5CAP appear on the odometer of a 2007 dodge caravan what does 9A5CAP mean ?


Gas cap could be loose, check that. Then you need to have code cleared with a scanner. Autozone may do it for free.

Jun 23, 2015 | 2007 Dodge Caravan

1 Answer

2007 town & country has "gas cap" where odometer reading is. what causes this and how can I reset it?


The message usually means the engine has been run with the gas cap off, or the cap is leaking.
You may have to use a scanner or code reader to erase the code.
Check your owners manual for details.

Oct 02, 2014 | 2007 Chrysler Town &

2 Answers

My gmc terrain is showing "8" on dash where speedometer is. what does that mean?


The number 8 means that the digital display in between the speedometer and tachometer is reading your speed. It you set your display to trip odometer to trip one it will read 1, trip odometer 2 will read 2, fuel economy will read another number. and finally navigation will read 9.

Aug 01, 2013 | GMC Cars & Trucks

3 Answers

Check engine light came on and stayed on


Put the Key into the Ignition and turn from OFF to ON (not START) Position, which is right before Start and do this three (3) times. On the third time leave the Key in the ON (not Start) Position.
If you have a didgital Odometer look there for codes (example P 0123). There may be several so wait until it reads "donE". Record these Codes.
If you do not have anything reading in the Odometer window: Look immediately at the Check Engine Light and count the number of times the Check Engine Light blinks (on and off). There are two (2) digit blinks, then a pause followed by pause followed by more blinks. Record the number of blinks. The last set should be five (5) blinks followed by five (5) blinks.
Get back with me on what the blink counts were. (example 18, 23, 55).
Let me know if this helped, and provide me with additional information I requested. Contact me at FixYa.com using the comment section of tyour original Posted Question.

Feb 16, 2010 | 1995 Jeep Grand Cherokee

1 Answer

I am getting inconsistent odometer readings. For a 23 mile round trip it will sometimes read 47 miles sometimes 23.


Newer car have an electronic speedometer and the problem can be a bad sensor at the transmission or to the computer. The sensor picks up the signal through a magnetic device in the transmission, this sensor could be at fault.....

Feb 13, 2010 | 2001 Hyundai Accent

2 Answers

Check Engine Code


If you take it to an ADVANCE AUTO PARTS they will read the codes for free. I believe that AUTO ZONE will also read them at no cost to you. Good luck. Hope this helps.

Apr 30, 2009 | 2006 Jeep Wrangler

1 Answer

Speedometer error on 1993 Plymouth Voyager with 3.3L V6


Have you called transmission place? Did they also install it? Ask them if they changed speedometer adapter, and mention the difference in speed.

Jan 22, 2009 | 1997 Plymouth Voyager

2 Answers

Mercedes benz 190e 1900year /air flow meter connections


AS far as i understand it your air flow meter only controles your idle, not your air/fuel mixture. The mixture is controled by the Air/fuel mixture body that sits immidiatly below your fuel distributor. it has a 'tower' that reaches up to a hole in your aircleaner so you can get to it with an allenkey. To set the mixture correct it needs the aircleaner on. that screw changes the pivot point of the arm that gets depressed by the large round disk visual if the aircleaner is of. This is not a throttle butterfly, it mechanically 'measures' the airflow by being sucket down and pushing a plunger upwards into the fuel distributer increasing the amount of petrol to the injectors. You say gas as a supplement... I assume you mean Hydrogen Fuelcell. Because if your trying to 'add' instead of replacing with LPG or Natural Gas you will have a problem as LPG for example needs to ignite earlier. For example if the petrol engine fires at 6 deg BTC on petrol, than converted for LPG it needs to fire at 16 deg BTC on their original plugs (newer plugs are available that allow for an acceptable setting suitable for both fuels but all i everseen when petrol was still present when switching to LPG is an 'engine bay' fire)... But assuming your talking Hydrogen fuel cells as a supplement to try and reduce your fuel consumtion than the element that could create a problem for you is the Lamda probe (Oxygen sensor) in your exhaust as it may think that your fuel mixture is to lean and tries to increase fuel through the cold start injector or the electronic pressure regulator on the fuel distributer. I hope this will help you somewhat.

Aug 08, 2008 | 1989 Mercedes-Benz 190

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...