Question about Cars & Trucks

Open Question

I appreciate your answer on my question ... i mean the both mirrors not moved and i was changed the fuse 10.A also i changed the joystick on the door but still not moved thanks for your help.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 187 Answers

SOURCE: remote mirrors not operating fuse ok.

Sounds like striped gears in the unit. Try moving the mirror by hand they should not have any play. Good luck.

Posted on May 12, 2009

Ad
  • 87 Answers

SOURCE: First off, I'd like to say thank God for a site

Since the locks stopped working as well, my guess is a fuse is blown. The first thing you should always do when accessories or lights or electrical things stop working is check all of your fuses (sometimes you'll have them in the engine bay as well as under the dash). I can't tell you how many times I've spent hours trying to track down an electrical problem only to discover that work I was previously doing had made a fuse blow.

It may also be a bad relay but I'd start with the fuses first.

Posted on Jun 14, 2009

  • 396 Answers

SOURCE: when you unlock the doors with remote the mirrors move

Means you have a short which is difficult to locate and correct.

Posted on Jun 30, 2009

dustydis
  • 373 Answers

SOURCE: Door mirror housing wobbly

open the door there is a panel remove and you will see the nuts for the mirror.

Posted on Sep 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i fix the passenger side windows and mirror


If it is not a fuse issue, then I would start tearing the door apart to look for a bad connection or a short in the wiring... Not a fun process.
You can also use an ohmmeter to check continuity and resistances of the switches with or without power.

Mar 17, 2015 | Cars & Trucks

1 Answer

WHERE ARE THE FUSES OR 2003 DENALI POWER MIRRORS?


According with the 2003 Yukon Denali Owners Manual, check on the Instrument Fuse Block, access door is on the drivers side edge of the instrument panel. Pull off the cover toa ccess the fuse block. Look "HVAC 1" tag label.


12_19_2011_7_22_30_pm.jpg


Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day

Dec 19, 2011 | 2003 GMC Yukon XL

3 Answers

2004 ford expedition eddie bower


For the rear window, just need adjuts the both slightly...


Check the next procedure to Power Mirrors...

Diagnosis & Testing

The exterior mirror control switch receives power through circuit SBP12 (GN/RD) and ground through circuit GD143 (BK/VT). The exterior mirror control switch uses circuit CPM23 (GY) as the common circuit for both exterior mirror up/down and right/left movement.
  1. Possible Causes:
    Fuse 12 (7.5A) (SJB) An open in circuits CPM23 (GY), SBP12 (GN/RD) or GD143 (BK/VT A short to ground in circuit CPM23 (GY) A short to voltage in circuit CPM23 (GY) Exterior mirror control switch.
  2. Checking the voltage at the mirror switch:
    Key in OFF position. Disconnect: Exterior Mirror Control Switch C527. Key in ON position. Measure the voltage between ground and exterior mirror control switch C527-1, circuit SBP12 (GN/RD). Voltage should be greater than 10 volts.
  3. If voltage is greater than 10 volts, check that fuse 12 (7.5A) is OK. If OK, REPAIR circuit SBP12 (GN/RD) for an open.

Exterior Mirror Motor Synchronization

NOTE This procedure must be performed any time the power folding mirrors are manually folded in or out, or if the position of the mirror case has been moved without using the mirror control switch.
NOTE If the power folding mirrors are folded or unfolded continuously (6 to 10 cycles), the power lockout feature will disable the system for 2 minutes to prevent damage to the power fold motors. After 2 minutes have elapsed, normal operation will resume.
  1. Set the mirror control switch to the CENTER position.
  2. Use the mirror control switch (press rearward) to automatically cycle the power folding mirrors in and out 4 times.
  3. When an audible popping sound is heard, the power folding mirror motors are synchronized.
    NOTE It may be necessary to cycle the power folding mirrors in or out up to 4 times before they are synchronized.

Removal & Installation
Motor
  1. Before servicing the vehicle, refer to the precautions section.
    NOTE If equipped with power folding mirrors, they must be synchronized any time the mirrors have been folded or unfolded without using the mirror control switch. Refer to synchronization procedure.
  2. Position the exterior mirror glass in a downward position to obtain a gap at the edge of the mirror.
    CAUTION Place a shop towel between the exterior mirror glass and the hand to avoid personal injury in the instance of glass breakage.
  3. Insert a flat-blade screwdriver between the mirror glass tabs and the mounting plate, and rotate to separate the locking tabs from the mounting plate.
  4. Carefully pull the top edge of the glass away from the exterior mirror housing.

    0996b43f802029e0.jpg Fig. Mirror Glass removal shown
  5. If equipped, disconnect the heated mirror electrical connectors and remove the glass.
  6. Remove the 3 exterior mirror motor screws and exterior mirror motor.
  7. Disconnect the electrical connectors.
  8. To install, reverse the removal procedure.

Switch
Expedition Trim Panel Removal

NOTE The door glass must be completely raised.
  1. Remove the window control switch plate.
  2. Remove the door handle bezel.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  3. Remove the two bolts and three screws, and remove the door trim panel.
  4. Remove the finish cover to access the two center screws.
  5. Disconnect the electrical connectors. Navigator Trim Panel Removal
  6. Remove the door handle bezel.
  7. Use service notch.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  8. Remove the two bolts and three screws, and remove the door trim panel.
  9. Disconnect the electrical connectors.
  10. Depress the locking tabs and remove the exterior mirror control switch.
  11. Remove the exterior mirror control switch.

If you dont want waiting more time for the Owners Manual, can check here this choice 2004-Ford-Expedition-Owners-Manual

Hope this help.

Apr 23, 2010 | 2004 Ford Expedition

2 Answers

Replacement of the side reaerview mirror on a


so you don't need to change the housing, but just the panel the mirror sits on right? If you mean the entire unit, then you'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and remove the cover adjacent to your mirror to remove the bolts to remove the mirror.

If it's just the back and the mirror, you'll need to angle the mirror until you can see the release clips on the back of the panel that mounts it to the housing (Pivot Point)... be very careful as the clips can easily break....

Aug 10, 2009 | 2004 Dodge Ram 2500

1 Answer

When you unlock the doors with remote the mirrors move


Means you have a short which is difficult to locate and correct.

Jun 30, 2009 | 2000 Buick Park Avenue

1 Answer

First off, I'd like to say thank God for a site like this, and thank you for helping me "office drone1". And here is my last question for now. Today, I put on my 94' Grand Prix, the Passenger side power...


Since the locks stopped working as well, my guess is a fuse is blown. The first thing you should always do when accessories or lights or electrical things stop working is check all of your fuses (sometimes you'll have them in the engine bay as well as under the dash). I can't tell you how many times I've spent hours trying to track down an electrical problem only to discover that work I was previously doing had made a fuse blow.

It may also be a bad relay but I'd start with the fuses first.

Jun 14, 2009 | 1994 Pontiac Grand Prix

1 Answer

Electrical problem after battery replacement.


Below is a listing of which fuse corresponds with which circuit:

1 - 10 Amp - Transmission Controller, Gauges, Autostick
2 - 10 Amp - Right High Beam Headlight
3 - 10 Amp - Left High Beam Headlight
4 - 10 Amp - Radio, CD Player
5 - 10 Amp - Washer Motor
6 - 15 Amp - Power Outlet
7 - 20 Amp - Tail, License, Parking, Illumination Lights, Instrument Cluster
8 - 10 Amp - Airbag
9 - 10 Amp - Turn Signal Lights, Turn Signal/Hazard Indicator
10 - 15 Amp - Right Low Beam
11 - 20 Amp - High Beam Relay, High Beam Indicator, High Beam Switch
12 - 15 Amp - Left Low Beam Headlight
13 - 10 Amp - Fuel Pump Relay, Power Train Control Module
14 - 10 Amp - Cluster, Day/Night Mirror,Sunroof, Overhead Console, Garage Door Opener, Body Control Module
15 - 10 Amp - Daytime Running Light Module (Canada)
16 - 20 Amp - Fog Light Indicator
17 - 10 Amp - ABS Control, Back Up Lights, Daytime Running Lights, A/C Heater Control Cavity Fuse Circuits
18 - 20 Amp - Power Amplifier, Horn
19 - 15 Amp - Overhead Console, Garage Door Opener, Trunk, Overhead, Rear Reading, and Visor Vanity Lights, Trunk Release Solenoid, Power Mirrors, Power Door Locks, Body Control Module, Aspirator Motor
20 - 20 Amp - Brake Lights
21 - 10 Amp - Leak Detection Pump, Low Rad Relay, High Rad Relay, A/C Clutch Relay
22 - 10 Amp - Airbag
23 - 30 Amp - Blower Motor, ATC Power Module
24 - 20 Amp - Power Window Motors
25 - 20 Amp - Power Door Lock Motors, Power Seats

Apr 04, 2009 | 2002 Dodge Intrepid

1 Answer

How do i turn in my rear view mirrors


On drivers side internal door handle there's a small, joystick and an up-or-down switch. the former moves the mirror while the switch selects which mirror. good luck !

Oct 28, 2008 | 2001 BMW 3 Series

2 Answers

No interior light


check the touch wire on the rear view mirror one of them may be cut
did u check if the lamp work well?

Jul 06, 2008 | 1994 Volvo 850

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...