Question about 2013 Toyota Venza
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Something similar to that was happening with our Odyssey...the beeping when you are driving whether it's ongoing or intermittent is the "safety alarm" letting you know the door is not closed. The power lock is not engaging. What I do when I get the beeping while driving is hit the Door Close button. It causes the door to attempt to engage again. To fix it...we first cleaned out the space below the side running board (kids were hiding crayons and things in there), then looked for any obstructions along the top and bottom tracks. I sprayed a lubricant along the tracks (I'd suggest the dry lube kind...I used WD40 the 1st time and had streaks of it dripping down after driving), use a lube that has a long straw to spray in small places...and spray up into the track that runs the length of the middle of the car. Manually open and shut it a few times to get the tracks lubed, then try it out.
If you press the open OR close button by remote or in the car and get nothing...no movement/no noises/no beeping...then it could be the electrical circuit itself, the signal itself may be impeded...or the motor shot. Have you tried any of these suggestions before?
Posted on Mar 22, 2009
sequence for freelander lock unlock, to lock 1press = door lock , 2press = door dead lock , to unlock 1 press = driver door unlock, 2 press = passenger doors unlock, also rear window can be operated from fob to do so press and hold unlock button for 3 or more seconds and rear window will roll down.neat feature.hope this helps please feel free to contact me on fb( marcus loud)
Posted on Aug 13, 2009
try disconnecting your vehicles battery for about 5 min[remember to have your radio code].reconnect battery and try the central locking again.
Posted on Oct 09, 2009
I had the same problem and I'm embarassed by the fix:
Canceling the power back door system (vehicles with power back door) Page 61 in Owner's Manual
Turn the main switch to disable the power back door system (far lefthand side on lower dashboard.)
When in the Inoperative Setting, The back door cannot be operated even with the wireless remote control or power back
Posted on Dec 24, 2009
Tips for a great answer:
Jun 07, 2016 | 2013 Volkswagen Passat
May 28, 2016 | 2009 Toyota Venza
Dec 12, 2015 | 2008 Lincoln Navigator
1 Unlock the car, get in and close the door
2 Switch ignition on
3 Press the door lock button on the dash to lock the car
4 Press and hold the door lock button on the dash, the alarm will beep
5 Keep holding the door lock button on the dash, press and hold the lock on the remote,
the alarm will beep
Repeat (5) for the other remotes,
6 leave the door lock button on the dash, the alarm will beep, switch ignition off
Feb 13, 2014 | Suzuki Cars & Trucks
Feb 08, 2014 | Toyota Cars & Trucks
Aug 14, 2013 | 2009 Toyota Venza
May 13, 2012 | 2009 Toyota Venza
May 12, 2012 | Toyota Venza Cars & Trucks
Oct 20, 2009 | 2009 Toyota Venza
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: