Question about 2005 Hyundai Tucson
1. Disconnect the battery negative cable.
2 Disconnect the starter cable (A) from the B terminal (B) on the solenoid (C), then disconnect the connector (D) from the S terminal (E)
.3. Remove the 2 bolts holding the starter, then remove the starter.
4. Installation is the reverse of removal. 5. Connect the battery positive cable and negative cable to the battery.
There are also video's on you tube showing you how.
Posted on Dec 22, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
take off the stabilizer bar across the top of the engine (The one running from fender to fender) and the aluminum intake as well as the speed control cables, and several sensor cables on and around the intake. What should be a 45 minute job takes several hours to do right. I never fully removed all the all cables from the intake. once it was loose enough to move around I just turned it sideways and moved it back enough to reach the back three plugs.
you can try a long extension with a woble joint. Remember, you have to put a plug back in without breaking the ceramic casing which is tough to do with a woble joint.
Posted on Oct 22, 2009
Tips for a great answer:
on Oct 24, 2013 | Hyundai Cars & Trucks
Nov 29, 2014 | Hyundai Tucson Cars & Trucks
Apr 07, 2014 | 2005 Hyundai Tucson
Sep 07, 2012 | Hyundai Tucson Cars & Trucks
Jun 03, 2011 | Hyundai Tucson Cars & Trucks
May 08, 2009 | 2005 Hyundai Tucson
Jan 24, 2009 | Hyundai Tucson Cars & Trucks
17 people viewed this question
Usually answered in minutes!