Question about 2004 Mitsubishi Diamante

Open Question

I need to know the steps on how to remove the headlight assembly on my 2004 diamante vrx. Both headlights please

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ilragatzzo78
  • 241 Answers

SOURCE: Difficulty changing low-beam headlight

Disconnect the connector.

  1. Remove the socket cover. CAUTION: Do not touch the surface of the bulb with hands or dirty gloves as the bulb may pop after a short time. If the surface does become dirty, clean it with alcohol or thinner, and let it dry thoroughly before installing.
  2. Release the bulb securing spring, and remove the bulb.
  3. Replace the bulb, and connect the connector securely
need email address to send images

Posted on May 15, 2008

Ad
proJekttaLon
  • 91 Answers

SOURCE: How do I replace the headlight in my 2005 mitsubishi lancer

Hi. While looking into your question I came across another posting of the same question for a 2004 Mitsubishi Endeavor and I believe it could help you. I put it in a link below. The instruction are basically the same. I hope this helps. Let me know if I can be of anymore assistance.

2004 Mitsubishi Endeavor Headlight Replacement

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Need to replace right side low beam headlight on 2003 jeep grand cherokee. do i need to remove the battery?


the glove box , operators guide covers this,,, in most cars
seems its not , in the last free year published 2004
but is in the FSM, on mpage 8L-17
2003 WJ "lighting"
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Rtm
excerpt: this is step 1, (step 3 is bingo)
25308090-43uikwyueni1btdprhgcswjj-2-0.gif

Dec 05, 2014 | 2003 Jeep Grand Cherokee

1 Answer

Changing low beam bulb


depending on which side it is either the battery box asembly or the air cleaner assembly has to be removed to get to the wire keeper that holds the headlight bulb assembly in the rear of the headlight housing. then release the wire keeper and the bulb assembly comes out of the rear of the headlight housing and you can change the bulb. do not touch the glass part of the new bulb assembly, only handle the metal part of the new bulb assembly.

Nov 10, 2013 | 2004 Mitsubishi Diamante

1 Answer

I need to remove old broken passenger side headlight assembly and install new assembly in my 2004 Chevy Colorado crew cab. I need step by step instructions on how to do this myself.


I am not sure about the Colorado, but most vehicles about that age have a plastic clip. If you open the hood it is near the back of the headlight area and pulls straight up. You should be able to take these two clips off and the headlight will go straight forward, you can then twist the bulb holders out of the headlight assembly. Reverse procedure to install. Please rate my answer so I an awarded points for it.

Jan 29, 2012 | Chevrolet Colorado Cars & Trucks

1 Answer

HOW DO YOU REMOVE THE ASSEMBLY ON THE OLDS 95 SO I CAN CHAGNE THE LIGHTS.. I REMOVED TWO SCRES IN THE FRONT BU IT DOES NOT HELP TO REMOVE THE ASSEMBLY


Step 1:
Be sure the ignition key is not in the ignition, and the headlight switch is in the "Off" position.



Step 2:
Locate and remove the two headlight assembly screws on the top rail of the headlight assembly. Use the nut driver to remove them.


Step 3:
Place a rag between the headlight assembly and the bumper to protect the paint.


Step 4:
Wrangle the assembly outward. There is a guide pin behind the assembly on the fender side that holds it in place. This needs to be popped out of its socket in order to remove the headlight assembly. Pull slightly outward from the side, then forward and away from the car.


Step 5:
Locate the correct bulb socket (high-beam/low-beam). Disconnect the wire connector using the flathead screwdriver.


Step 6:
Turn the socket 1/4-turn counterclockwise to remove the socket from the headlight assembly. Remove the old bulb.


Step 7:
Insert the new bulb into the headlight assembly, and turn clockwise to lock into place. Be careful not to touch the glass bulb of the new socket. This could degrade headlight performance.


Step 8:
Reconnect the wire connector to the bulb. Test the light before replacing the headlight assembly, then turn off the lights again.


Step 9:
Reinsert the headlight assembly, making sure to align the guide pin into the socket. Replace the screws and tighten.

Feb 12, 2011 | 1995 Oldsmobile Aurora

2 Answers

How do you remove the headlights off a Pontiac grand am 2004


Lighting Headlight, Side Marker, Park & Turn Signal Assembly Removal & Installation To Remove:
  1. Open the hood.
  2. Remove the front air deflector.
  3. Apply light pressure to the headlight lens to hold the headlight in place while disconnecting the retainers.
  4. Lift up the headlight retainers to release the housing.
  5. Remove the headlight assembly, pulling straight forward from the headlight mounting panel. NOTE: Note the location and position of the adjuster retainers and locator tab.
  6. Disconnect the wiring harness from the headlight assembly.
  7. Rotate the bulb(s)/socket(s) as needed counterclockwise to release.
  8. Remove the bulb(s)/socket(s) from the headlight assembly.
To Install:
  1. Install the replacement bulb(s)/socket(s) to the headlight assembly rotating clockwise until fully seated.
  2. Connect the wiring harness to the headlight assembly.
  3. Position the headlight assembly to the mounting panel.
  4. Apply light pressure to the headlight assembly lens to hold the assembly in place while installing the retainers.
  5. Align the headlight assembly retainers and slide them over the assembly mounting tabs
  6. Install the front air deflector.
  7. Close the hood.
prev.gif next.gif

Feb 02, 2011 | 2004 Pontiac Grand Am

2 Answers

Trying to change headlight bulb


Hello,

The 2004 grand prix pontiac houses 2 headlight bulbs per headlight assembly. The low beam headlight are located at the fender of the car and the high beam on the grill side of the assembly.

To replace the headlight bulb of Your pontiac grand prix, 2004 model. It is qiute technical and moderately easy to fix. There is no solution that cannot be done the DIY way, as long as You get the proper guide and You are technically able to do such works.
  1. Park the Grand Prix on a flat surface, apply the parking brake and ensure both the engine and headlight switches are off.
  2. Open the hood and approach the headlight assembly with the faulty headlight bulb.
  3. Locate the headlight assembly retaining clip. It's behind the headlight assembly on top on the fender side. Lift the clip upward halfway to release the headlight assembly.
  4. Pull the assembly out being careful not to scratch the paint on the fender or the lens of the assembly.
  5. Reach behind the assembly and disconnect the wire connection and plug from the headlight bulb socket.
  6. Turn the socket of the bulb counterclockwise 1/4-turn to remove the composite bulb from the assembly. Discard the bulb.
  7. Install the replacement bulb into the assembly (handling the plastic socket part only oil in skin will damage the glass bulb of halogen bulbs because of the intense heat they burn at), but ensure the tabs of the socket end of the bulb are aligned with the notches in the assembly before turning it clockwise and locking the bulb into place.
  8. Plug the wire connection back into the socket of the bulb before replacing the assembly back into place and pushing down on the retaining clip. Test the headlight bulb for operation before closing the hood.
Hope this was helpful. Thank You for using FixYa!!!

Jan 15, 2011 | 2004 Pontiac Grand Prix

1 Answer

Changing headlights in 2004 VW New Beetle Convertible


  • Step 1 Open the hood of your Beetle and look between the first two fender-mounting bolts. Then, look down a few inches from there. There is a small knob, which is the release knob for the headlight-housing assembly.
  • Step 2 Push the release knob down and then all the way up as far as it will go.
  • Step 3 Push the headlight housing forward from the back of the housing.
  • Step 4 Unplug the headlight connector from the back of the headlight.
  • Step 5 Push down on the plastic tab on the back of the headlight housing and slide the black plastic cover down to reveal the headlight.
  • Step 6 Remove the spring clip from the back of the headlight by pulling it off with your fingers. The headlight bulb will come out of the back of the headlight housing when you do this.
  • Step 7 Install the new headlight bulb and replace the spring clip to secure the headlight to the housing. Installation of the removed components is the reverse of removal.
  • Aug 15, 2010 | 2004 Volkswagen New Beetle Convertible

    1 Answer

    How do you replace the headlight assembly on a 99 Pontiac Grand Am?


    1. Open the hood to your Pontiac Grand Am. Have the car keys on you, but not in the ignition and make sure the lights are in the "off" position.
    2. Step 2 Locate the splash guard and the plastic push pins that hold it down. It runs along the entire front frame rail. Removing the entire splash guard will make it easier to to remove even one headlight on one particular side.
    3. Step 3 Remove the pins by lifting up on the center of the pin. Pull it up about 1/4-inch and then pry the pin insert and pin out of the hole.
    4. Step 4 Locate and remove the two-headlight assembly bolts on the the top of the headlight assembly. Use the ratchet and a socket to remove the bolts.
    5. Step 5 Pull the headlight assembly forward by hand. Be careful not to scratch the lens of the assembly or scratch the paint on the front bumper.
    6. Step 6 Unplug the wire from the back of the headlight that is blown out.
    7. Step 7 Turn the headlight bezel counterclockwise (about 1/4 turn) until it releases the headlight from the back of the headlight assembly. Extract the old headlight and discard it.
    8. Step 8 Insert the new headlight into the headlight assembly. Be careful not to touch the glass of the bulb. Handle it only from the bottom.
    9. Step 9 Replace the bezel and turn 1/4 turn clockwise until it locks into place.
    10. Step 10 Plug the wire back into the headlight and rest the assembly onto the bumper gently so you can turn on the lights to test and make sure the headlight it working properly.
    11. Step 11 Insert the headlight assembly back into place. Replace and tighten the headlight assembly bolts.
    12. Step 12 Put the splash guard into place and place the push pins into position. Insert the pin and its insert into the hole with the pin still in the "up" position. When the insert is seated flush to the splash guard in the hole, simply push the pin down to lock.

    Jan 30, 2010 | Pontiac Grand Am Cars & Trucks

    1 Answer

    I have to replace the ballast for the HID headlights on my 2004 XC70 volvo and it is under the headlight assembly. I just need assistance on how to remove the passenger side headlight assembly


    You need to remove the front bumper. Five push clips along the hood line, remove the headlight wipers (if equipped), one T25 screw in the front of each fender well, then two 12mm bolts under the headlights (1 each side). Then there are 4 10mm bolts holding the headlight in.

    Aug 13, 2009 | 2004 Volvo XC70

    2 Answers

    Moisture in headlight assembly, 2004 toyota seinna van. How do I take out to reseal or replace? It is the assembly on the passenger side.


    Once the factory seal is leaking moisture, it can be hard to dry and reseal. You can try a hir dryer, and then look for a seam to lay silicone on, but the recommended fix is to replace the whole headlight assembly. The lens is not removable like on older lamps. The pieces are molded, and then epoxied together. Hard to split apart and get back together without damaging. Try a salvage yard.

    Mar 20, 2009 | 2004 Toyota Sienna

    Not finding what you are looking for?
    2004 Mitsubishi Diamante Logo

    Related Topics:

    21 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8522 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...