Question about Cars & Trucks

1 Answer

I neede a zipper replaced on a cloudveil coat. repair facility?

The teeth on the zipper have seperated from the main part of the zipper cloth... this is on a ski coat. has a plastic coating for waterproof and weather proof

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,026 Answers

Take it to any shop that mends /repairs clothes
many dry cleaners have that facility
look in the phone directory /trade pages for phone numbers

Posted on Dec 21, 2016

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace a fuel injector?

The fuel injector is held in place using rubber o rings in the fuel rail and intake manifold. You need to remove anything in the way to access the fuel rail. There will be 2 bolts securing the rail to the engine and gently pull up on the rail. In most cases the injector will seperate and you can do the replacement. In some cases the injector may be very hard to come out as the rubber seals may have dirt etc keeping them from seperating easily. Apply a light coating of synthetic grease to the new seals and reinstall

Jun 28, 2015 | 1998 Mercury Mystique

3 Answers

Ring and pinion adjustment

hello sir ...

RING AND PINION TOOTH CONTACT PATTERN.—The ring and pinion tooth contact pattern is used to double-check ring and pinion adjustment. To check the accuracy of your adjustments, coat the ring gear teeth with a thin coat of red lead, white grease, hydrated ferric oxide (yellow oxide or iron), or Prussian blue. Turn the ring gear one way and then the other to rub the teeth together, producing a contact pattern on the teeth. Carefully note the contact pattern that shows up on the teeth where the substance used has been wiped off. A good contact pattern is one located in the center of the gear teeth (fig. 5-21). Figure 5-21 shows several ring and pinion gear contact patterns. Study each and note the suggested correction for the faulty contact

Jul 05, 2008 | 1991 Ford F250

1 Answer

1972 corvette brake light bulb wont come out

Take a small piece of cloth and cover the bulb then squeeze it with a pair of pliers and break the bulb. Throw the cloth away. Safety glasses would be good here. Or wiggle the glass part untill it seperates from the base. You choose. Take an awl or a small screwdriver and get between the bulb base and the socket. Now put a small needle nose pliers into the opening squeezing the bulb base and twist the plliers rolling up the side of the base, decreasing it's diameter. Push and turn and the bulb will come out. Go to a plumbing shop or plumbing supply and buy a fitting brush for 1/2" copper fittings. Clean the corrosion out of the socket, put a coating of dielectric grease into the socket. Do the same to the other sockets if the bulbs in them will come out. If they won't, you know what to do. Former 64 Corvette owner. I miss my 31 Ford Tudor Sedan more!

Jun 08, 2009 | 1972 Chevrolet Corvette

1 Answer

Starter problem on 1999 chevy P30 step van

yes it can be replaced if you can find the parts. most stores dont sell seperate parts. also check flywheel teeth

Dec 19, 2008 | 2000 Chevrolet Cavalier

1 Answer

My zipper windows don't work anymore...

There is no fix.
The top has to be installed and pulled back along the sides so you have minimal gap at the zippers.
You can also get a new top.

Oct 09, 2008 | 2001 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides