Question about Saturn Cars & Trucks
Most cam sensors are mounted at the front of the engine, in the timing chain cover. Best to post codes first. If you have a cam code, it could be the sensor. If you have a cam correlation code, this is different.
Posted on Dec 20, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It may be complicated, depending which radio you have. UC1 or US9, US8. The owners manual should have all the info you need. You do have the radio code, right? If not...you will need to visit the dealer. If you have the code, the radio must be on for 1 hour and then it will unlock when it reads - - - - , and you can put the code in. Its not your girlfriends fault. ; )
Posted on Dec 30, 2009
There is some sealed units with no drain or fill. Or it could be on the driver side bottem of the transmission but is not accessable because it is too close to the frame. Hope you find it and its accessable.
Posted on Apr 20, 2010
You may be lucky and just have to remove the top section just behind the mirror. Usually you have to remove the door panel to access the bolts.
Posted on Apr 30, 2010
SOURCE: 2006 Saturn ion 2 won't start.
You will have to pinpoint what the engine is missing...
All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.
Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.
Posted on Apr 16, 2012
Tips for a great answer:
Aug 25, 2015 | Saturn Cars & Trucks
Sep 29, 2014 | 2007 Saturn Ion
Oct 22, 2012 | 2007 Saturn Ion
Apr 28, 2010 | 2007 Saturn ION-2 Quad Coupe
Mar 25, 2010 | 2007 Saturn ION-2 Quad Coupe
Nov 22, 2009 | 2007 Saturn ION-2 Quad Coupe
Sep 05, 2009 | 2004 Saturn ION
Nov 20, 2017 | Saturn Cars & Trucks
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: