Question about Ford Cars & Trucks

1 Answer

Is there an intruction manual or diagram on how to replace a power steering belt on a 2009 Ford Edge?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 11,730 Answers

A single belt or serpentine ?

Posted on Dec 20, 2016

  • 2 more comments 
  • JRGiroux
    JRGiroux Dec 20, 2016

    I'm not sure...

  • Jeff Armer Dec 20, 2016

    Serpentine belt has a tensioner pully , belt goes around all the componets that need to be turned . alternator , power steering pump , water pump ,A/C compressor . I would think a 2009 would have a serpentine belt. Should have a yellow sticker under the hood somewhere showing belt routing !

  • Jeff Armer Dec 20, 2016

    Here you go watch this video https://www.youtube.com/watch?v=jcFD-55q...

  • Jeff Armer Dec 20, 2016

    The power steering belt is a streachy belt

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to remove the inner wheel well liner on the Ford Edge


This video details how to remove the wheel well liner on your Ford Edge to access the power steering, alternator, AC compressor and power steering belt and the serpentine belt.
Removing the inner wheel well cover on 2011 Ford Edge

on Mar 28, 2016 | Ford Cars & Trucks

1 Answer

How to replace a power steering belt on a 2009 Ford Edge..3.5l


You need a stretchy belt remover (special tool) for that.

Dec 20, 2016 | 2009 Ford Edge

1 Answer

Power steering pump 2007 Ford Edge located where? Can't seem to locate it..need to replace it; 3.5 engine


CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components may result.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Using a suitable suction device, siphon the power steering fluid from the power steering fluid reservoir.
  1. Remove the RH inner fender splash shield. For additional information, refer to Section 501-02 .
  1. Using the special tool, disengage the power steering pump belt from the power steering pump pulley and position it aside.
    • Install the removal tool between the belt and the pulley and turn the crankshaft bolt clockwise to disengage the belt.
  1. Remove the 4 bolts and position the driveshaft aside.
  1. Using a suitable jack, support the rear of the subframe.
  1. Remove the 2 nuts, 4 bolts and the subframe support brackets.
  1. Remove the 2 middle subframe nuts.
  1. Lower the rear of the subframe.
  1. Release the clamp and disconnect the power steering supply hose from the power steering pump.
  1. Disconnect the power steering pressure (PSP) switch electrical connector.
  1. Remove the power steering pressure line fitting banjo bolt and disconnect the line from the power steering pump.
    • Discard the 2 seals.
  1. Remove the 3 power steering pump bolts and the power steering pump. This is a job best left to a qualified repair shop !

Jul 26, 2016 | 2007 Ford Edge

1 Answer

Diagram of 2009 Honda CRV serpentine belt what is the routing


The parts store you purchase belt from should be able to give you the routing.

Aug 04, 2014 | 2009 Honda CR-V

1 Answer

How to replace crankshaft sensor on a 2008 ford edge


Jacob, did a lot of searching on the net, you may have to get a manual for this one, I could not even find the sensors location.
Check your local library for a repair manual or google search for one. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Free Online Auto Repair Manuals and Free Auto Repair Diagrams
http://repair.chiltondiy.com/Ford/Edge/Repair-Manual-Online
http://www.factory-manuals.com/repairmanual/ford-edge-2006-2007-2008-2009-2010-repair-manual

Apr 20, 2013 | 2007 Ford Edge SEL Plus

1 Answer

Need power steering belt diagram for ford puma


We only have the diagrams for North American cars and light trucks. I suggest you contact a local parts store they will have a book that shows diagrams.

Sep 27, 2012 | Ford Cars & Trucks

1 Answer

Serpentine belt replacement


Originally the diagram was on a sticker somewhere in the engine compartment or on the underside of the hood, if that is gone, try the auto parts place where the belt was purchased, they may be able to help. A Ford dealership may be kind enough to provide a diagram also.

Feb 24, 2012 | 2001 Ford Escort ZX2

1 Answer

Belt inst


For the 3.0L Vulcan, you have a tensioner that is located just below the power steering pully. Use a 15mm wrench or the 15mm shallow well socket that comes in a Serpentine Belt tool to push the tensioner toward the rear of the engine compartment. Take the old belt off and route the new belt. The belt begins at the crankshaft pully, goes under and around the a/c compressor, up around the power steering pump, around (with the flat edge) the idler pully, around the alternator, the flat edge then sits against the tensioner and back around to the water pump pully. You should have a belt routing diagram on the underside of the hood just above the serpentine pully assembly.

Jun 23, 2009 | 1999 Ford Taurus

2 Answers

Puma 1.4 belt diagram


HOPE THIS HELP ONE BELT ROUTING
Regards Paul
www.limotec.co.uk
e57e721.jpg

Jan 11, 2009 | 2003 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...