Question about 2009 Ford Edge

1 Answer

How do I replace the power steering belt on a 2009 Ford Edge?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,204 Answers

Here's a video on how to replace your belts.Good luck. 2008 ford edge belt replacement Applies to 2007 2014 models

Posted on Dec 20, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to remove the inner wheel well liner on the Ford Edge


This video details how to remove the wheel well liner on your Ford Edge to access the power steering, alternator, AC compressor and power steering belt and the serpentine belt.
Removing the inner wheel well cover on 2011 Ford Edge

on Mar 28, 2016 | Ford Cars & Trucks

1 Answer

How to replace a power steering belt on a 2009 Ford Edge..3.5l


You need a stretchy belt remover (special tool) for that.

Dec 20, 2016 | 2009 Ford Edge

2 Answers

2009 patriot battery light came on and steering is hard


if it has an electric power steering system, the battery light indicates alternator failure ( belt or alternator problems ) and there is insufficient power to run the power steering
again if the drive belt for the alternator is broken or missing , that will put on the battery light and there will be no power steering as the power steering pump will not be driven either

Dec 04, 2016 | 2009 Jeep Patriot

1 Answer

Power steering pump 2007 Ford Edge located where? Can't seem to locate it..need to replace it; 3.5 engine


CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components may result.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Using a suitable suction device, siphon the power steering fluid from the power steering fluid reservoir.
  1. Remove the RH inner fender splash shield. For additional information, refer to Section 501-02 .
  1. Using the special tool, disengage the power steering pump belt from the power steering pump pulley and position it aside.
    • Install the removal tool between the belt and the pulley and turn the crankshaft bolt clockwise to disengage the belt.
  1. Remove the 4 bolts and position the driveshaft aside.
  1. Using a suitable jack, support the rear of the subframe.
  1. Remove the 2 nuts, 4 bolts and the subframe support brackets.
  1. Remove the 2 middle subframe nuts.
  1. Lower the rear of the subframe.
  1. Release the clamp and disconnect the power steering supply hose from the power steering pump.
  1. Disconnect the power steering pressure (PSP) switch electrical connector.
  1. Remove the power steering pressure line fitting banjo bolt and disconnect the line from the power steering pump.
    • Discard the 2 seals.
  1. Remove the 3 power steering pump bolts and the power steering pump. This is a job best left to a qualified repair shop !

Jul 26, 2016 | 2007 Ford Edge

1 Answer

How do you replace the power steering belt.


proper routing? belt tensioner needs to be moved

Mar 14, 2015 | 2009 Dodge Avenger

1 Answer

Diagram of 2009 Honda CRV serpentine belt what is the routing


The parts store you purchase belt from should be able to give you the routing.

Aug 04, 2014 | 2009 Honda CR-V

1 Answer

Power steering pump and tensioner and all power steering belt pulleys changed air removed and steal loud squealing


Hi Tereza.
has anybody checked the pressure hoses of the steering and especially the one which has the one way valve inside whether is the one with the problem?

May 04, 2014 | 2006 Ford Taurus

1 Answer

I have a 2012 ford fusion and the information board is saying power steering assist fail can anyone tell me what this mean and how to fix it


The power steering is controlled by an electric motor and not the normal belt driven pump ... So it's gonna be an issue with the electric pump on the steering rack

Mar 21, 2014 | 2009 Ford Fusion

1 Answer

Belt inst


For the 3.0L Vulcan, you have a tensioner that is located just below the power steering pully. Use a 15mm wrench or the 15mm shallow well socket that comes in a Serpentine Belt tool to push the tensioner toward the rear of the engine compartment. Take the old belt off and route the new belt. The belt begins at the crankshaft pully, goes under and around the a/c compressor, up around the power steering pump, around (with the flat edge) the idler pully, around the alternator, the flat edge then sits against the tensioner and back around to the water pump pully. You should have a belt routing diagram on the underside of the hood just above the serpentine pully assembly.

Jun 23, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
2009 Ford Edge Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...