Question about Cars & Trucks

1 Answer

When i go to start my truck there is nothing. No clicking, no attempt to turn over. NOTHING

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Do your accessories work if not you may have blown your fuseable link. I'm assuming you have verified the battery terminal are clean and the battery has juice. If your accessories work then it could be your starter is bad or there is a broken or corroded wire.

Posted on Dec 20, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 beetle will not turn over. After many attempts with the key it finally does. What could cause this?


check and test ignition switch --and key if either worn will cause difficulty in starting

Aug 15, 2017 | 1998 Volkswagen Beetle

1 Answer

I have an '04 Sebring Convertible with the 2.7L V-6 engine. It has been running fine with no problems for over a year since I bought it. Then the other day, I had it detailed and drove it home...


This happens all too often on the Chryslers, the starter fuse blowing. The cause in most cases is the starter solenoid. I recommend replacing the starter and the solenoid when this happens, to keep from having to do it again a few months later, I hope this helps.

Jul 21, 2011 | 2004 Chrysler Sebring

1 Answer

My 1991 non-turbo Mercury Capri started fine last night but while idling, the Air Bag light began to flash and the Battery light came on. Not wanting to travel I turned off the ignition switch. ...


charge the battery and once fully charged, do a LOAD test on it, clean all the connections and start the car ,, check the voltage at the battery posts with the car running, you should get between 13.5 and 14.5 volts, if not, replace the alternator , if you do, the battery and the cables just needed some attention

Jul 17, 2011 | 1991 Mercury Capri

1 Answer

Triton 2000 2.4 . Is there any type of relay from the ign switch. All of a sudden nothing from ign key. power ok. when turn ign on to start nothing except fast clicking from under dash.


battery starter or selenoid on starter...sounds like weak battery tho...be sure to eliminate by trying to boost tapping on starter while attempting to start may also work as they get stuck up sometimes.hope this helps.

Mar 21, 2011 | Mitsubishi Passenger Cars & Trucks

1 Answer

98 Toyota Corolla - won't start or turn over. It ran fine but when we tried to start again, there was nothing. Sometimes the dashlights light up when you turn the key, but then go black when you touch the...


Does the start try turning the engine?.. or does it just click? or not even click?

HOw is the battery voltage?
check with volt meter. it could be dead after many attempts

Apr 17, 2010 | 1998 Toyota Corolla

1 Answer

1996 blazer just got brand new battery, but has moments where it wont start, it will click and all the lights come on, but it wont even attempt to turn over and then a few more turns of the ignition, and...


The "clicking" is probably from the starter selinoid. If it's malfunctioning you'll get that clicking and nothing else. Follow cable back from starter to locate selinoid.

Mar 17, 2010 | 1996 Chevrolet Blazer

1 Answer

WHEN I TURN THE IGNITION I CAN HEAR A CLICK SOUND BUT NOTHING ELSE AS IF ITS TRYING TO SEND POWER TO THE SPARK PLUGS OR WTHVER EVERY THING WORKS JUST WONT ATTEMPT TO TURN OVER


if it clicks when you try to start it might be the battery.
Turn on the lights and try to start.. and see if they dim out,
if so replace or charge the battery KC

Apr 06, 2009 | 1993 Honda Prelude

1 Answer

Will not start


i suspect a faulty starter check for voltage output at the starter solenoid with a multimeter. or (shade tree) tap the starter with a hammer then attempt to start. if the vehicle starts after the tapping replace starter.

Dec 18, 2008 | 2001 Oldsmobile Aurora

1 Answer

Starter or solinoid?


I never heard of a starter solonoid coming with shims. Did you replace the starter or starter solonoid?
What engine do you have?

Nov 20, 2008 | 1994 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...