Question about Mazda 323

Open Question

Hi looking for the nm settings of the flywheel on a Mazda 323 b 3 2002 please if anybody can help

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1071 Answers

SOURCE: Audi flywheel - 1.9 tdi

you can use one off a vw passat

Posted on Aug 19, 2009

Ad
  • 5 Answers

SOURCE: good day, i need to

Hi rita d ,
the answer to your question according to information supplied by auto data ( the bible to us techs) is 60Nm, then a further 90 degrees. You should also use new bolts. Hope this helps,
Doc Scott

Posted on Jun 22, 2011

  • 14585 Answers

SOURCE: I am looking for the torque setting for mazda b3 4 cylinder 1.3 (mains, big-ends, , cylinder head and flywheel) please

Buy the manual. You are saving money(lots) by doing it your self. I don't have your car on alldata. I would pass it on. Other wise, I wouldn't trust anyone's advise advice on torque settings. They are all so different. Every car I work on, I buy the program from alldata.

Posted on Aug 08, 2015

  • 44374 Answers

SOURCE: TORQUE SETTINGS

anyone want to guess on a MAKE, model ,engine size , year . I do not

Posted on Jun 24, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the cylinder head torque settings for Mazda bt-50 2.5 turbo.?


Three stages of tightening the bolts (first at 35 Nm, then
> at 70 Nm and finally at 115 - 130 Nm)

Jan 14, 2017 | Mazda Cars & Trucks

1 Answer

TORQUE SETTINGS


anyone want to guess on a MAKE, model ,engine size , year . I do not

Jun 24, 2016 | Cars & Trucks

1 Answer

Hi i have daewoo matiz 800cc can you help me by giving me the torque settings for the big end bearing caps please


You are looking for the torque settings for big end bearings and main bearings on a daewoo matiz?
Main bearings torques on a Daewoo Matiz 800cc (1999)
Stage 1: 25-30 Nm
Stage 2: 55-60 Nm
Big End Bearings…

Mar 09, 2016 | Daewoo Cars & Trucks

1 Answer

I am looking for the torque setting for mazda b3 4 cylinder 1.3 (mains, big-ends, , cylinder head and flywheel) please


Buy the manual. You are saving money(lots) by doing it your self. I don't have your car on alldata. I would pass it on. Other wise, I wouldn't trust anyone's advise advice on torque settings. They are all so different. Every car I work on, I buy the program from alldata.

Aug 08, 2015 | Mazda Cars & Trucks

1 Answer

What the torque settling on a 1.8spi vauxhall cavalier 1994


Cylinder head Renew bolts: Yes Tighten: 25 Nm Tighten: 90° Tighten: 90° Tighten: 90° Other engine tightening torques Main bearings Renew bolts/nuts: Yes Main bearings Stage 1: 50 Nm Main bearings Stage 2: 45°-60° Big end bearings Renew bolts/nuts: Yes Big end bearings Stage 1: 35 Nm Big end bearings Stage 2: 45°-60° Oil pump to cylinder block : 6 Nm Sump bolts : 15 Nm Sump drain bolt : 55 Nm Flywheel/driveplate :
  • Use new bolts and tighten as follows:
      • 1,4/1,6 = 35 Nm + 30° + 15°
      • 1,8/2,0 = 65 Nm + 30° + 15°
  • "Pot"-type flywheel = 65 Nm + 30° + 15°
  • Tighten drive plate to 60 Nm.
Clutch pressure plate : 15 Nm Crankshaft pulley/damper centre bolt : Use new bolts. Tighten centre bolt to 130 Nm + 40°-50°
Camshaft sprocket/gear : 45 Nm Camshaft/rocker cover : 8 Nm Inlet manifold to cylinder head : 22 Nm Exhaust manifold to cylinder head : 22 Nm Spark plugs : 25 Nm Lambda sensor (Oxygen) : 30 Nm Chassis tightening torques Front hub :
  • Tighten nut in three stages:
    1. 130 Nm
    2. Slacken off
    3. 20 Nm + 80°-90°.
Steering track rod end : New nuts 60 Nm Brake disc to hub Front: 4 Nm Brake caliper to carrier Front: 30 Nm Brake caliper/carrier to hub Front: 95 Nm Brake caliper/carrier to hub Rear: 80 Nm New bolts ABS sensor Front: 8 Nm ABS sensor Rear: 15 Nm Road wheels : 110 Nm
There you go pretty much covers everything hope that helps

Jan 11, 2015 | Vauxhall Cars & Trucks

1 Answer

I need torque specs on flywheel for a 2002 sport trac 4.0


Installation
  1. NOTE: Special bolts are used for flywheel installation. Do not use standard bolts.
    Install the flywheel.
    • Tighten the bolts in the sequence shown in two stages.
    • Stage 1: Tighten the bolts to 13 Nm (10 lb-ft).
    • Stage 2: Tighten the bolts to 71 Nm (52 lb-ft).
please rate, thanks

May 26, 2011 | 2002 Ford Explorer Sport Trac

1 Answer

Im looking for the specs for a 1999 accent torque converter bolts


Please don't forget to rate! Thanks!

  • Transaxle mount and torque the bolts to 65-80 ft. lbs. (90-110 Nm)
  • Torque converter and torque the bolts to 34-39 ft. lbs. (46-53 Nm)
  • Flywheel cover and torque the bolts to 72-84 inch lbs. (8-10 Nm)
  • May 12, 2011 | Hyundai Accent Cars & Trucks

    1 Answer

    2002 audi tt 225 bhp cranksharft torque settings


    Crankshaft torque settings for 2002 Audi TT 225 BHP:

    1. Main bearings: Renew bolts = Yes
    2. Main bearings: Stage 1 = 65 Nm
    3. Main bearings: Stage 2 = 90 degrees
    4. Big end bearings: Renew bolts / nuts = Yes
    5. Big end bearings: Stage 1 = 30 Nm
    6. Big end bearings: Stage 2 = 90 degrees
    7. Flywheel / driveplate = 60 Nm + 90 degrees (use new bolts / nuts)
    8. Crankshaft pulley / damper centre bolt = 90 Nm + 90 degrees (use new bolts)


    Nov 25, 2010 | Audi TT Cars & Trucks

    1 Answer

    I have a 99 mazda protege, 1.6l engine, automatic transmission. I am changing the CV joints out and I need the torque specification for the axle spindle nut that connects the cv joint to the wheel hub.


    hi the torque settings for the hub nuts are 236-318 Nm these are the drive shaft nuts that fit on the end of the shaft on the wheel hub hope that's what you required please rate and vote thanks

    Sep 20, 2010 | Mazda Protege Cars & Trucks

    1 Answer

    Flywheel torque setting vw transporter t30


    VW Transporter 2.5 TDI-PD, (made year: 2003 ... 2007), engine code: AXD, 130 HP / 3500 rpm.
    Important note: use new bolts!
    Flywheel/driveplate torque setting: 60 Nm + 90 degrees.
    Clutch to flywheel torque setting: 22 Nm.

    May 21, 2010 | 2004 Volkswagen Eurovan

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    19 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mazda Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Mazda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...