Question about 2007 Pontiac G6

Open Question

MY G6 2007 IS AUTOMATIC AND MANUEL SHIFT I WANNA KNOW DOES OT MATTER WHAT FLYWHEEL I GOT TO GET

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What causes Cts not to shift gears


You may have a bad shifting solenoid(automatic) low on transmission fluid,or your clutch isn't engaging ( manual)

Jun 28, 2015 | Cars & Trucks

2 Answers

I have a 1997 chevy blazer. the reverse isn't working the forward gears work just fine. do I need a different transmission?


Does it have a automatic or manuel trans? You said gears, manuel trans, possible shift fork, syncro, anyway you will need
some serious work done to it....rebuild it or replace it.....

Feb 28, 2015 | 1997 Chevrolet Blazer

1 Answer

Took the motor and trans out of 98 gmc sonoma replaced the motor and put everything back together. trans worked fine when we took it apart and now it will not move no matter what gear you put it in it is...


are the three bolts to the torque convertor screwed into the flywheel also? It seems they are not by your description.
the three bolts are on the outer parimeter of the flywheel

May 22, 2011 | 1998 GMC Sonoma

1 Answer

I have a 93 toyota paseo and when I drive it the gears grind like they wont shift corectlt I wanna know should I just get a hole new transsmison 4 it or is it the shift solenoid that needs 2 be replaced


If it is a standard/manual shift transmission, the clutch slave or master cylinder is probably going bad. If you continue to drive it like this it can damage the transmission. I would get these parts checked out ASAP to prevent transmission damage. This is a minor repair compared to replacing the transmission.



If it is an automatic transmission grinding and not shifting, the problem will be inside the transmission itself, and it should be repaired or replaced.

Dec 19, 2010 | 1993 Toyota Paseo

1 Answer

On my 1997 jimmy 4x4,will not shift into 4weal drive, high or low never done this before.


is it electric push button
if so its a sensor on the transfer case an or one of the wheels.....
if its manuel then the main shaft is striped....
or its seezed under your jimmy an dont wanna shift

Jan 04, 2010 | 1998 GMC Jimmy

2 Answers

Fly wheel ring gear replacement


You need to pull the tranny out.
Then the flywheel needs to be unbolted from the engine.
if it's an automatic, purchase a new flywheel, if its a clutch, you can have a new ring gear pressed on to the flywheel...

May 28, 2009 | 1984 Ford Bronco II

1 Answer

Automatic transmission will not shift out on my '92 chev silverad


check the governor for sticking valves drive gear worn.governor weights or springs binding.check 1-2 shift valve sticking.check the 2-4 band damage or worn band or band not engaged in anchor pin.

Apr 21, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Flywheel area, possibly transmission


the noise might be from a loose bendix on the starter,
the bendix is a little gear in fron of the starter see if there is any visual point to see it nad make sure it keeps away from the flywheel if not have the starter repalced, this bendix have a spring to keep it away from the flywheel also with a flash ligh try to see the closes you can to the center of flywheel sometimes they get crack where they atached to the engine,
and on the shifting might be a bad transmission or the shifter has to be inspected for your mechanic

May 31, 2008 | 1983 Chevrolet Silverado

Not finding what you are looking for?
2007 Pontiac G6 Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...