Question about Cars & Trucks

Open Question

The light and air conditioner wont come on, and the gear refuses to shift in corolla 2005. i guess it has to do with the integration relay. the car would start but the indicators wont come on!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jmeredith
  • 417 Answers

SOURCE: 2005 Toyota Corolla with 36,000 miles Transmission now "jumps" into gears

hi,
when the check engine light comes on, your car goes into a mode where instead of everything being normal, things are forced, to try and compensate for something else being wrong. It most likely does need a new timing belt, and a complete tuneup INCLUDING plugs and wires. we have a 1984 toyota corolla and it purrs like ground rice, I suggest the tuneup to continue proper rice production.

J

Posted on Aug 01, 2008

Ad
Levyathos
  • 60 Answers

SOURCE: 1996 Corolla Auto Transmission problem

Hi. 2005 Corolla CE. It's normal. They tend to do this when upshifting form 1st to 2nd gear. No timing chain readjustment needed.

96 Corolla. Overdrive not working properly, if not engaging after 45mph constantly. If driving on the city, is normal, but not after 45mph, when the car is trying to engage overdrive in order to save gas and preserve the trans gears. If not able to get help at the dealership, find another one and explain them the situation.

Posted on Aug 21, 2008

  • 1 Answer

SOURCE: 2005 Lesabre air bag light stays on

air bag light stays on

Posted on Jun 18, 2009

  • 1861 Answers

SOURCE: 2005 corolla , check engine light on and car

Take your car to a Toyota dealership. Have them scan the car for trouble codes. If they come up with a P-2716 code, you need a new Engine Control Unit (the computer). If your car has under 80,000 miles on it, Toyota will replace it for free.

Posted on Oct 16, 2009

  • 111 Answers

SOURCE: 1995 toyota avalon will not start and gear shift

Sounds like a battery problem. The clicking sound is usually the starter solenoid trying to engage the starter but not enough voltage or amps. There has to be enough power or you will not be able to move shifter assuming you pushed the brake pedal down while trying to shift out of park. And, it hasn't been noted whether it is a manual or auto trans.

Posted on Dec 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota corolla verso is a failure


is this a M/T or A/T
we cant guess what trans is in your car (new car options)
is the lever stuck? is that it?
ot the lever goes to R (okay) but car wont move.
non of this we can guess.

Dec 13, 2014 | Toyota Cars & Trucks

1 Answer

Ford e250 2005 year wont shift out of second gear. codes are p1747 p0708 p0755 p0750 p0743 startrd to shift hard shut off then tried to go home and wont shift out of second revers works gine


1st.. check fuse for clutch solenoid/relay. 2nd... replace clutch solenoid/relay. 3rd... check for damaged wiring to trransmission or connector to transmission. If all these are correct, see your Ford Dealer.

Dec 07, 2014 | 2005 Ford E-250 Van

1 Answer

2005 Corolla's manual trasmission shifts gears, it clunks


hi mate , sounds like the SPIGOT bearing its a little bearing that allows the gearbox to be at a different seed than the engine flywheel and if this is in bad condition it will take the gearbox front shaft to a higher speed than comfortable for gearshift , in the meantime when you go for 1st or reverse gear just engage a gear like 4th without taking your foot off the clutch and then go for 1st or reverse, this will stop the gearbox spining long enough for a smooth shif, oNLY USE THIS METHOD WHILE STaTIONARY and see a professional when you get time.

Mar 29, 2010 | 2005 Toyota Corolla

2 Answers

I need a fuse box diagram for a 2003 Ford Explorer Sport


I believe that this is what you are looking for.....
Fuse and relay locations--2nd generation power distribution box Layout- I think this is a good sticky candidate--

attachment.php?attachmentid=29397&d=1133918512

Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 10, 2009 | 2003 Ford Explorer Sport

1 Answer

2005 Toyota Corolla air conditioner is cold but


The air flow does not 'increase' with the recirc button pressed. The fan motor blows at specific speeds, no matter whether fresh or recirc is selected. The recirc feature is there so that you do NOT admit 'fresh/hot' air from the outside into the AC box. In short, the recirc feature is to re-use, or, recirculate the existing air in the car. When it is properly working, on a hot day, the recirc selection should drop the internal temperature at the center air vent about 6 degrees lower than with the fresh selected.

Jul 18, 2009 | 2005 Toyota Corolla

1 Answer

Corolla kicks/jolts when shifting gears.


I am trying to understand your problem. Check engine mounts. Have a driver in the car, hood open. Start car, foot on brakes, shift from park to reverse and back again. Shift through all gears, look for unusual engine movements around engine mounts area. Left foot on brakes, press gas in drive and reverse;watch for excessive engine movements. Be careful as you perform these steps. You may also want to check drive axles. Keep me updated.

Jun 12, 2009 | 2005 Toyota Corolla

1 Answer

05 corolla oem power door locks and windows install


All of the power locks and power windows are directly ties into the "Integration Relay". This is the large white box behind the fuse panel under the dash. There are 2 different Integration relays, one with electric windows, and one without them. You may need to change the integration relay, also.

Feb 24, 2009 | 2005 Toyota Corolla

1 Answer

1996 Corolla Auto Transmission problem


Hi. 2005 Corolla CE. It's normal. They tend to do this when upshifting form 1st to 2nd gear. No timing chain readjustment needed.

96 Corolla. Overdrive not working properly, if not engaging after 45mph constantly. If driving on the city, is normal, but not after 45mph, when the car is trying to engage overdrive in order to save gas and preserve the trans gears. If not able to get help at the dealership, find another one and explain them the situation.

Aug 01, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...