Why don't my account role panel work - Cars & Trucks

Button is worn out... Replace it and should work

you need to remove door panel to look inside to see if window has come out of track

window relay switch if none of the window switches are working. note:if you have door switches and console switch (you probably have 2 relays, locations may vary)

you don't they are setup so you can not move it now that digital has taken over i cant think
of any way to do this
back in the old days all you needed to do was disassemble the speed odometer and role the
numbers back to ware you needed it

i hope this helps you
bob

Hi, it is impossible for any auto mechanic to fix a digital dashboard into the 1989 Oldsmobile Royale because many don\'t have the expertise and equipment to do it, also the cost is of fixing it plays a major role expert you want to visit companies like **** My Ride to help you, but be ready to pay the price.


Take care

Check for a broken wire in the door jamb area.

part of the cars computer may be fried or you have some fuses out that control the gauge cluster.

First you need to remove the interior door panel. There may be plastic covering the inner door. it is ok to remove this. Next, role the iwindow down until you see the bottom hardware for the window. There should be two bolts that are reachable now. Unbolt them. This will allow the window, or whats left of it to be removed. If it is still a full window, you will have to unbolt it and then role it almost all the way down. Leave enough window to grab a hold of. The carefully angle the glass towards the front and pull up. It might takes some tweaking but you can get the window up and out. Patience is the key here. Be sure not to get to rough and it will eventually work its way out.

Try disconnecting the battery terminals as this may reset the cars computer. This worked when one of my rear windows would not go down flush.
hope this works for you

i dont know if ur door is electric or manual.as for the door not opening from the inside it could be a rod has come off from the inside of the door to the handle you have to take inside door panel off and have a look.