Question about Kia Cars & Trucks

Open Question

How do I set inlet and exhaust valve tappet setting on a Kia Rio 1.3

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: tappet/valve settings???

o.25mm when hot this is for inlet and outlet

Posted on Feb 11, 2009

Ad
  • 653 Answers

SOURCE: Engine tappet clearances

According to http://freespace.virgin.net/tommy.sandham/databook.htm# Rocker Adjustment, the cold clearance is .008" intake/.018" exhaust in the non-GT 1500cc, and .012" intake/.022 exhaust on the GT. Sweet little car!!!

Posted on Mar 01, 2009

emissionwiz
  • 76109 Answers

SOURCE: valve settings for 1999 mitsubishi galant

the valve followers in this engine are hydraulic and have no lash setting. if u have a noise u may have a defective cam follower, which is also called a lifter in OHV engines, yours is OHC.

Posted on Mar 23, 2009

  • 1 Answer

SOURCE: what are the tappet clearance settings for the

any 1 know the tapit setting for a toyota starlet 1990

Posted on Feb 17, 2010

  • 701 Answers

SOURCE: what is the proper spark plug gap setting for a 2002 Kia Rio

Hello mfriesner71; my name is Roger and I will answer for you. The correct plug gap is 0.027 to 0.031.in. Any gap between these will work fine. Just make sure they all gap the same. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. Roger

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set tappets on Nissan 1984 truck model CMA 81 FHS


set to .012" inlet hot and .014" exhaust hot
position no 5 piston when there is valve rock(overlap) and do no 1 valves. position no6 piston valves in overlap and do no3 piston valves and so on in firing order.

Feb 11, 2015 | Nissan Cars & Trucks

1 Answer

How do I set tappets of a 2.5 diesel turbo mazda


you haven't mentioned if it is a 4 cyl or not. However bring no 1 cylinder up to tdc and watch the tappets of the next cylinder to fire. when that cylinders rockers are in valve overlap situation ( exhaust starting to close and inlet starting to open) then that will be maximum clearance on no 1 cylinder and is when you set the tappets turning the engine until the next cylinder is at TDC watch for the next cylinder again to be in valve overlap and repeat as for no 1 cylinder

Dec 25, 2014 | Mazda Cars & Trucks

1 Answer

What is the tappet setting for the KIA 2700 truck?


for the K2700 II 2.5 TCi 2004 - 07 engine code D4BH it is inlet 0.15mm cold and exhaust is the same 0.15mm cold. for the K2700 II 2.7D 2004 - 08 Engine code J2 it is inlet 0.30mm cold and exhaust is 0.38mm cold.

Dec 24, 2014 | Kia Cars & Trucks

1 Answer

Citreon saxo tappet clearance


You didn't mention what year so if the vehicle is early then standard settings are .010"inlet hot and .012" exhaust hot. If late model it will have hydraulic tappets. which are self adjusting

Aug 15, 2014 | Cars & Trucks

1 Answer

Kia carens problems


Tappets......... perhaps is what your friend said. The tappets are part of the engine inlet and exhaust valve set up. Most tappets are self adjusting in modern motors, (Hydraulic).
The old fashioned tappets are manually adjusted during regular car servicing. This happens at set intervals, for instance every 20,000 miles.
Inlet valves allow air and fuel into the engine and exhaust valves let the burnt fuel and air out.
Tappets are fitted between the inlet and exhaust valves, they ensure that the valves open on time and more importantly close properly. If the tappet happened to be badly adjusted and did not let the valve close properly then damage to the valve and cylinder head can happen by burning.
If you have a significant power loss I would be surprised to find that the just tappets/valves were to blame.

Jan 26, 2014 | Cars & Trucks

1 Answer

I need the tappet settings for a peugeot 207


inlet valves are set at 0.20mm, exhaust valves are set at 0.40mm, adjust them with the engine cold.

Nov 28, 2013 | Peugeot Cars & Trucks

1 Answer

1987 peugeot 2 liter valve setting engine


these engines with manual rockers had wider than usual settings as i remember ,but set to around 12 th inlet and 15th exhaust and you be far out and check for wear under the actual tappet and if excessive then renew as parts still available but the settings i give should stop the noisy exhaust tappets these cars are famous for

Jan 31, 2013 | 1987 Peugeot 505

1 Answer

What is the valve settings


If you have adjustable tappets the setting are usually .010" hot inlet and .12" hot exhaust. Start at 12 and 14 cold and recheck when hot. If you have hydraulic tappets there is no adjustment as they automatically adjust when oil pressure is achieved

Jan 26, 2013 | Cars & Trucks

1 Answer

In what order do you set tappets on a 850cc 3 cylinder daihatsu engine?


I haven't personally worked on the Charade before, but the process on all 3 cylinder engines is the same.

The firing order is 1-3-2 and because there is an odd number of cylinders you will never get a situation where the inlet/exhaust valve on cylinder x is fully closed leaving the inlet/exhaust on cylinder y fully open (in contrast to engines with an even cylinder count).

Instead, you just choose whether to start with the inlet or exhaust valves first and then adjust cylinder 1. You then turn the engine over by hand until whichever valves you chose to start with are fully open on no.3 and adjust those and then the same on no.2. Starting again at no.1 you then do the remaining valves, so if you started with the exhaust valves, now you do the inlets.

Hope this helps, if so please return the favour by taking a moment to rate my answer.

Feb 04, 2010 | Daihatsu Charade Cars & Trucks

3 Answers

Tappet/valve settings???


o.25mm when hot this is for inlet and outlet

Jul 28, 2008 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...